FreeCalypso > hg > freecalypso-schem2
comparison venus/src/MCL @ 76:ad6212dabe02
MCL resistors: convert to parts (except USB domain)
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Dec 2021 20:10:18 +0000 |
parents | 280e1ffc4281 |
children | c273bf8a93cb |
comparison
equal
deleted
inserted
replaced
75:280e1ffc4281 | 76:ad6212dabe02 |
---|---|
1002 part=EMB9 | 1002 part=EMB9 |
1003 slotmap=slotmap/Q601 | 1003 slotmap=slotmap/Q601 |
1004 | 1004 |
1005 # Resistors | 1005 # Resistors |
1006 | 1006 |
1007 part 0402R-220k: | |
1008 value=220k | |
1009 footprint=0402 | |
1010 description=Chip resistor, 220k, 1%, 0402 | |
1011 npins=2 | |
1012 | |
1013 part 0402R-100k: | |
1014 value=100k | |
1015 footprint=0402 | |
1016 description=Chip resistor, 100k, 1%, 0402 | |
1017 npins=2 | |
1018 | |
1019 part 0402R-47k: | |
1020 value=47k | |
1021 footprint=0402 | |
1022 description=Chip resistor, 47k, 1%, 0402 | |
1023 npins=2 | |
1024 | |
1025 part 0402R-36k5: | |
1026 value=36k5 | |
1027 footprint=0402 | |
1028 description=Chip resistor, 36.5k, 1%, 0402 | |
1029 npins=2 | |
1030 | |
1031 part 0402R-22k: | |
1032 value=22k | |
1033 footprint=0402 | |
1034 description=Chip resistor, 22k, 1%, 0402 | |
1035 npins=2 | |
1036 | |
1037 part 0402R-10k: | |
1038 value=10k | |
1039 footprint=0402 | |
1040 description=Chip resistor, 10k, 1%, 0402 | |
1041 npins=2 | |
1042 | |
1043 part 0402R-3k3: | |
1044 value=3k3 | |
1045 footprint=0402 | |
1046 description=Chip resistor, 3.3k, 1%, 0402 | |
1047 npins=2 | |
1048 | |
1049 part 0402R-2k2: | |
1050 value=2k2 | |
1051 footprint=0402 | |
1052 description=Chip resistor, 2.2k, 1%, 0402 | |
1053 npins=2 | |
1054 | |
1055 part 0402R-1k: | |
1056 value=1k | |
1057 footprint=0402 | |
1058 description=Chip resistor, 1k, 1%, 0402 | |
1059 npins=2 | |
1060 | |
1061 part 0402R-750R: | |
1062 value=750R | |
1063 footprint=0402 | |
1064 description=Chip resistor, 750 ohm, 1%, 0402 | |
1065 npins=2 | |
1066 | |
1067 part 0402R-470R: | |
1068 value=470R | |
1069 footprint=0402 | |
1070 description=Chip resistor, 470 ohm, 1%, 0402 | |
1071 npins=2 | |
1072 | |
1073 part 0402R-10R: | |
1074 value=10R | |
1075 footprint=0402 | |
1076 description=Chip resistor, 10 ohm, 1%, 0402 | |
1077 npins=2 | |
1078 | |
1079 part 0402R-jumper: | |
1080 value=0R | |
1081 footprint=0402 | |
1082 description=Chip resistor jumper, 0 ohm, 0402 | |
1083 npins=2 | |
1084 | |
1007 part MNR04-10k: | 1085 part MNR04-10k: |
1008 description=Pack of 4 resistors, isolated, 10 kOhm | 1086 description=Pack of 4 resistors, isolated, 10 kOhm |
1009 value=10k | 1087 value=10k |
1010 manufacturer=Panasonic | 1088 manufacturer=Panasonic |
1011 manufacturer_part_number=EXB-28V103JX | 1089 manufacturer_part_number=EXB-28V103JX |
1025 npins=8 | 1103 npins=8 |
1026 | 1104 |
1027 R204: | 1105 R204: |
1028 # resistor on Iota IBIAS pin | 1106 # resistor on Iota IBIAS pin |
1029 hier=mob.core.bb.abb.R204 | 1107 hier=mob.core.bb.abb.R204 |
1030 footprint=0402 | 1108 part=0402R-100k |
1031 npins=2 | |
1032 | 1109 |
1033 R206: | 1110 R206: |
1034 # pull-up resistor on SIM-I/O net | 1111 # pull-up resistor on SIM-I/O net |
1035 hier=mob.core.bb.abb.R206 | 1112 hier=mob.core.bb.abb.R206 |
1036 footprint=0402 | 1113 part=0402R-10k |
1037 npins=2 | |
1038 | 1114 |
1039 R207: | 1115 R207: |
1040 # resistor for Calypso SIM_PWCTRL | 1116 # resistor for Calypso SIM_PWCTRL |
1041 hier=mob.core.bb.dbb.R207 | 1117 hier=mob.core.bb.dbb.R207 |
1042 footprint=0402 | 1118 part=0402R-10k |
1043 npins=2 | |
1044 | 1119 |
1045 R208: | 1120 R208: |
1046 # pull-up of Iota nTESTRESET to UPR | 1121 # pull-up of Iota nTESTRESET to UPR |
1047 hier=mob.core.bb.abb.R208 | 1122 hier=mob.core.bb.abb.R208 |
1048 footprint=0402 | 1123 part=0402R-100k |
1049 npins=2 | |
1050 | 1124 |
1051 R211: | 1125 R211: |
1052 # part of the voodoo "internal" VCXO circuit | 1126 # part of the voodoo "internal" VCXO circuit |
1053 hier=mob.core.rf.Rita_vcxo.vcxo_passive.R211 | 1127 hier=mob.core.rf.Rita_vcxo.vcxo_passive.R211 |
1054 footprint=0402 | 1128 part=0402R-10R |
1055 npins=2 | |
1056 | 1129 |
1057 R215: | 1130 R215: |
1058 # series resistor in the 32.768 kHz crystal osc circuit | 1131 # series resistor in the 32.768 kHz crystal osc circuit |
1059 hier=mob.core.bb.dbb.R215 | 1132 hier=mob.core.bb.dbb.R215 |
1060 footprint=0402 | 1133 part=0402R-220k |
1061 npins=2 | |
1062 | 1134 |
1063 R216: | 1135 R216: |
1064 # pull-down resistor on MCUDI net | 1136 # pull-down resistor on MCUDI net |
1065 hier=mob.core.bb.R216 | 1137 hier=mob.core.bb.R216 |
1066 footprint=0402 | 1138 part=0402R-100k |
1067 npins=2 | |
1068 | 1139 |
1069 R217: | 1140 R217: |
1070 # part of the voodoo "internal" VCXO circuit | 1141 # part of the voodoo "internal" VCXO circuit |
1071 hier=mob.core.rf.Rita_vcxo.vcxo_passive.R217 | 1142 hier=mob.core.rf.Rita_vcxo.vcxo_passive.R217 |
1072 footprint=0402 | 1143 part=0402R-220k |
1073 npins=2 | |
1074 | 1144 |
1075 R222: | 1145 R222: |
1076 # VBACKUP pull-down resistor in place of Leonardo C222 | 1146 # VBACKUP pull-down resistor in place of Leonardo C222 |
1077 hier=mob.core.bb.abb.VBACKUP_pull_down | 1147 hier=mob.core.bb.abb.VBACKUP_pull_down |
1078 value=100k | 1148 part=0402R-100k |
1079 footprint=0402 | |
1080 npins=2 | |
1081 | 1149 |
1082 R251: | 1150 R251: |
1083 # series resistor in the 26 MHz signal from Rita to Calypso | 1151 # series resistor in the 26 MHz signal from Rita to Calypso |
1084 hier=mob.core.clock_rf2dbb.R251 | 1152 hier=mob.core.clock_rf2dbb.R251 |
1085 footprint=0402 | 1153 part=0402R-470R |
1086 npins=2 | |
1087 | 1154 |
1088 # The following two resistor packs are in the analog I&Q circuit | 1155 # The following two resistor packs are in the analog I&Q circuit |
1089 # between Iota and Rita | 1156 # between Iota and Rita |
1090 | 1157 |
1091 R295: | 1158 R295: |
1099 slotmap=slotmap/R296 | 1166 slotmap=slotmap/R296 |
1100 | 1167 |
1101 R330: | 1168 R330: |
1102 # power on LED series resistor | 1169 # power on LED series resistor |
1103 hier=mob.led_PWON.R | 1170 hier=mob.led_PWON.R |
1104 value=470R | 1171 part=0402R-470R |
1105 footprint=0402 | |
1106 npins=2 | |
1107 | 1172 |
1108 R331: | 1173 R331: |
1109 # U302 feedback resistor | 1174 # U302 feedback resistor |
1110 hier=mob.spkr.R331 | 1175 hier=mob.spkr.R331 |
1111 footprint=0402 | 1176 part=0402R-36k5 |
1112 npins=2 | |
1113 | 1177 |
1114 R332: | 1178 R332: |
1115 # U302 feedback resistor | 1179 # U302 feedback resistor |
1116 hier=mob.spkr.R332 | 1180 hier=mob.spkr.R332 |
1117 footprint=0402 | 1181 part=0402R-36k5 |
1118 npins=2 | |
1119 | 1182 |
1120 R338: | 1183 R338: |
1121 # pull-down resistor on U302 enable control line | 1184 # pull-down resistor on U302 enable control line |
1122 hier=mob.spkr.R338 | 1185 hier=mob.spkr.R338 |
1123 value=100k | 1186 part=0402R-100k |
1124 footprint=0402 | |
1125 npins=2 | |
1126 | 1187 |
1127 R351: | 1188 R351: |
1128 # U302 input resistor | 1189 # U302 input resistor |
1129 hier=mob.spkr.R33xA | 1190 hier=mob.spkr.R33xA |
1130 value=10k | 1191 part=0402R-10k |
1131 footprint=0402 | |
1132 npins=2 | |
1133 | 1192 |
1134 R352: | 1193 R352: |
1135 # U302 input resistor | 1194 # U302 input resistor |
1136 hier=mob.spkr.R33xB | 1195 hier=mob.spkr.R33xB |
1137 value=10k | 1196 part=0402R-10k |
1138 footprint=0402 | |
1139 npins=2 | |
1140 | 1197 |
1141 R361: | 1198 R361: |
1142 # JTAG pull-up/down resistor pack | 1199 # JTAG pull-up/down resistor pack |
1143 part=MNR04-10k | 1200 part=MNR04-10k |
1144 slotmap=slotmap/R361 | 1201 slotmap=slotmap/R361 |
1145 | 1202 |
1146 R401: | 1203 R401: |
1147 hier=mob.uart.Host_TxD_pullup | 1204 hier=mob.uart.Host_TxD_pullup |
1148 footprint=0402 | 1205 part=0402R-22k |
1149 npins=2 | |
1150 | 1206 |
1151 R402: | 1207 R402: |
1152 hier=mob.uart.Host_DTR_pullup | 1208 hier=mob.uart.Host_DTR_pullup |
1153 footprint=0402 | 1209 part=0402R-22k |
1154 npins=2 | |
1155 | 1210 |
1156 R403: | 1211 R403: |
1157 hier=mob.uart.Host_TxD2_pullup | 1212 hier=mob.uart.Host_TxD2_pullup |
1158 footprint=0402 | 1213 part=0402R-22k |
1159 npins=2 | |
1160 | 1214 |
1161 R404: | 1215 R404: |
1162 hier=mob.uart.Host_RTS_pulldown | 1216 hier=mob.uart.Host_RTS_pulldown |
1163 footprint=0402 | 1217 part=0402R-47k |
1164 npins=2 | |
1165 | 1218 |
1166 R405: | 1219 R405: |
1167 hier=mob.sim.switch_pullup | 1220 hier=mob.sim.switch_pullup |
1168 footprint=0402 | 1221 part=0402R-220k |
1169 npins=2 | |
1170 | 1222 |
1171 # Precharge current limiting resistor | 1223 # Precharge current limiting resistor |
1172 R406: | 1224 R406: |
1173 hier=mob.chg.Rprech | 1225 hier=mob.chg.Rprech |
1174 value=TBD | 1226 value=TBD |
1190 footprint=0402 | 1242 footprint=0402 |
1191 npins=2 | 1243 npins=2 |
1192 | 1244 |
1193 R409: | 1245 R409: |
1194 hier=mob.lcd.bl.BL_EN_pulldown | 1246 hier=mob.lcd.bl.BL_EN_pulldown |
1195 value=100k | 1247 part=0402R-100k |
1196 footprint=0402 | |
1197 npins=2 | |
1198 | 1248 |
1199 R410: | 1249 R410: |
1200 hier=mob.lcd.bl.cursel.R_fixed | 1250 hier=mob.lcd.bl.cursel.R_fixed |
1201 value=TBD | 1251 value=TBD |
1202 footprint=0402 | 1252 footprint=0402 |
1214 footprint=0402 | 1264 footprint=0402 |
1215 npins=2 | 1265 npins=2 |
1216 | 1266 |
1217 R413: | 1267 R413: |
1218 hier=mob.led_LPG.R | 1268 hier=mob.led_LPG.R |
1219 value=TBD | 1269 part=0402R-470R |
1220 footprint=0402 | |
1221 npins=2 | |
1222 | 1270 |
1223 R414: | 1271 R414: |
1224 hier=mob.led_PWL.R | 1272 hier=mob.led_PWL.R |
1225 value=TBD | 1273 part=0402R-470R |
1226 footprint=0402 | |
1227 npins=2 | |
1228 | 1274 |
1229 R415: | 1275 R415: |
1230 hier=mob.audio_main.R9 | 1276 hier=mob.audio_main.R9 |
1231 value=2.2k | 1277 part=0402R-2k2 |
1232 footprint=0402 | |
1233 npins=2 | |
1234 | 1278 |
1235 R416: | 1279 R416: |
1236 hier=mob.audio_hso.R19 | 1280 hier=mob.audio_hso.R19 |
1237 value=2.2k | 1281 part=0402R-2k2 |
1238 footprint=0402 | |
1239 npins=2 | |
1240 | 1282 |
1241 R417: | 1283 R417: |
1242 hier=mob.audio_hso.Detect_pullup | 1284 hier=mob.audio_hso.Detect_pullup |
1243 value=220k | 1285 part=0402R-220k |
1244 footprint=0402 | |
1245 npins=2 | |
1246 | 1286 |
1247 # external base resistor for Q405 | 1287 # external base resistor for Q405 |
1248 R418: | 1288 R418: |
1249 hier=mob.buz.npn.Rbase | 1289 hier=mob.buz.npn.Rbase |
1250 value=750R | 1290 part=0402R-750R |
1251 footprint=0402 | |
1252 npins=2 | |
1253 | 1291 |
1254 # external B-E resistor for Q405 | 1292 # external B-E resistor for Q405 |
1255 R419: | 1293 R419: |
1256 hier=mob.buz.npn.Rbe | 1294 hier=mob.buz.npn.Rbe |
1257 value=22k | 1295 part=0402R-22k |
1258 footprint=0402 | |
1259 npins=2 | |
1260 | 1296 |
1261 # attenuators in the Tx path from Rita to PA | 1297 # attenuators in the Tx path from Rita to PA |
1262 part chip_atten: | 1298 part chip_atten: |
1263 device=RAC101A-3dB | 1299 device=RAC101A-3dB |
1264 manufacturer=Kamaya | 1300 manufacturer=Kamaya |
1279 pinout=chipatten-2to1.pinout | 1315 pinout=chipatten-2to1.pinout |
1280 | 1316 |
1281 R604: | 1317 R604: |
1282 # 0R (Openmoko) or 47R (iWOW) in the TCXOEN signal path | 1318 # 0R (Openmoko) or 47R (iWOW) in the TCXOEN signal path |
1283 hier=mob.core.rf.Rita_vcxo.R604 | 1319 hier=mob.core.rf.Rita_vcxo.R604 |
1284 footprint=0402 | 1320 part=0402R-jumper |
1285 npins=2 | |
1286 | 1321 |
1287 R623: | 1322 R623: |
1288 hier=mob.core.rf.PA.R623 | 1323 hier=mob.core.rf.PA.R623 |
1289 footprint=0402 | 1324 part=0402R-1k |
1290 npins=2 | |
1291 | 1325 |
1292 R701: | 1326 R701: |
1293 hier=usb.usb.DM_series_R | 1327 hier=usb.usb.DM_series_R |
1294 footprint=0402 | 1328 footprint=0402 |
1295 npins=2 | 1329 npins=2 |
1319 footprint=0402 | 1353 footprint=0402 |
1320 npins=2 | 1354 npins=2 |
1321 | 1355 |
1322 R707: | 1356 R707: |
1323 hier=usb.buf.jmp_RTS | 1357 hier=usb.buf.jmp_RTS |
1324 footprint=0402 | 1358 part=0402R-jumper |
1325 npins=2 | |
1326 | 1359 |
1327 R708: | 1360 R708: |
1328 hier=usb.bctl.ChanB_RTS_pullup | 1361 hier=usb.bctl.ChanB_RTS_pullup |
1329 footprint=0402 | 1362 footprint=0402 |
1330 npins=2 | 1363 npins=2 |
1334 footprint=0402 | 1367 footprint=0402 |
1335 npins=2 | 1368 npins=2 |
1336 | 1369 |
1337 R710: | 1370 R710: |
1338 hier=VBUS_pulldown | 1371 hier=VBUS_pulldown |
1339 footprint=0402 | 1372 part=0402R-100k |
1340 npins=2 | |
1341 | 1373 |
1342 R711: | 1374 R711: |
1343 hier=VCHG_pulldown | 1375 hier=VCHG_pulldown |
1344 footprint=0402 | 1376 part=0402R-100k |
1345 npins=2 | |
1346 | 1377 |
1347 R712: | 1378 R712: |
1348 hier=usb.Rload | 1379 hier=usb.Rload |
1349 value=3.3k | 1380 part=0402R-3k3 |
1350 footprint=0402 | |
1351 npins=2 | |
1352 | 1381 |
1353 # As an original FreeCalypso initiative, we are putting Pi network topologies | 1382 # As an original FreeCalypso initiative, we are putting Pi network topologies |
1354 # between the outputs of our RF3166 PA and the inputs of our Epcos quadband | 1383 # between the outputs of our RF3166 PA and the inputs of our Epcos quadband |
1355 # FEM. At PCB design time, we explicitly retain the freedom to populate a | 1384 # FEM. At PCB design time, we explicitly retain the freedom to populate a |
1356 # capacitor, an inductor or a 0R jumper for the series component of each Pi | 1385 # capacitor, an inductor or a 0R jumper for the series component of each Pi |