FreeCalypso > hg > freecalypso-schem2
view venus/src/periph/jtag_if.v @ 47:9f5a3567d699
progress toward LCD integration
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 27 Nov 2021 02:09:46 +0000 |
parents | 2f344ca2c1e4 |
children |
line wrap: on
line source
/* * This Verilog module captures our JTAG interface circuit, copied from * Leonardo and FCDEV3B. Unlike FCDEV3B, for the present FC Venus version * we omit TI's non-understood EMU0/1 signals. In our defense, Leonardo * schematics also show EMU0/1 as unconnected, with only the JTAG scan chain * and XDS_RESET brought out. */ module jtag_if (GND, Vio, nTESTRESET, TDI, TCK, TMS, TDO); input GND, Vio; inout nTESTRESET; output TDI, TCK, TMS; input TDO; wire XDS_RESET, between_transistors; header_14pin connector (.pin_1(TMS), .pin_2(XDS_RESET), .pin_3(TDI), .pin_4(GND), .pin_5(Vio), .pin_6(), /* keying position */ .pin_7(TDO), .pin_8(GND), .pin_9(TCK), .pin_10(GND), .pin_11(TCK), .pin_12(GND), .pin_13(), /* EMU0 omitted */ .pin_14() /* EMU1 omitted */ ); capacitor C363 (Vio, GND); /* pull-up/down resistors */ resistor_slot R361A (TCK, GND); /* skipping TDO (R361B) */ resistor_slot R361C (TDI, Vio); resistor_slot R361D (TMS, Vio); /* reset circuit */ capacitor C335 (Vio, XDS_RESET); transistor_slot PNP (.E(Vio), .B(XDS_RESET), .C(between_transistors) ); transistor_slot NPN (.E(GND), .B(between_transistors), .C(nTESTRESET) ); endmodule