FreeCalypso > hg > freecalypso-schem2
graph
-
venus/doc/Flash+RAM writtenFri, 10 Dec 2021 20:26:05 +0000, by Mychaela Falconia
-
change flash+RAM MCP to S71PL129NFri, 10 Dec 2021 06:43:39 +0000, by Mychaela Falconia
-
add 74AXP1T34 buffer for flash resetFri, 10 Dec 2021 06:20:19 +0000, by Mychaela Falconia
-
first preparations for changing flash+RAM MCP to S71PL129NFri, 10 Dec 2021 05:58:58 +0000, by Mychaela Falconia
-
doc/USB-and-mobile-domains: document UART rescue headerWed, 08 Dec 2021 07:36:45 +0000, by Mychaela Falconia
-
add 3-pin header for possible external boot controlWed, 08 Dec 2021 05:32:47 +0000, by Mychaela Falconia
-
add UART rescue headerWed, 08 Dec 2021 05:00:50 +0000, by Mychaela Falconia
-
capture initial population of RLC67[0-5]Sun, 05 Dec 2021 04:41:45 +0000, by Mychaela Falconia
-
charging LED series resistor nailed downSun, 05 Dec 2021 04:27:10 +0000, by Mychaela Falconia
-
R407 intnoconn: use different terminal numbering on further thoughtSun, 05 Dec 2021 03:49:14 +0000, by Mychaela Falconia
-
charging current sense resistor nailed downSun, 05 Dec 2021 03:38:33 +0000, by Mychaela Falconia
-
precharge current limiting resistor nailed downSun, 05 Dec 2021 03:07:45 +0000, by Mychaela Falconia
-
MCL resistors: convert to parts (except USB domain)Sat, 04 Dec 2021 20:10:18 +0000, by Mychaela Falconia
-
MCL part header-2pin: list the gold-plated versionSat, 04 Dec 2021 19:02:14 +0000, by Mychaela Falconia
-
found a seemingly-suitable part for Q401Fri, 03 Dec 2021 20:58:04 +0000, by Mychaela Falconia
-
new 3.3V USB LDO regulator part, direct replacementFri, 03 Dec 2021 07:56:26 +0000, by Mychaela Falconia
-
new 32.768 kHz crystal part, same specs as beforeFri, 03 Dec 2021 02:51:51 +0000, by Mychaela Falconia
-
MCL inductors: convert to partsFri, 03 Dec 2021 02:13:59 +0000, by Mychaela Falconia
-
manual RESET button new part: 260 g force, shorter actuatorThu, 02 Dec 2021 22:40:39 +0000, by Mychaela Falconia
-
MCL capacitors: convert to partsThu, 02 Dec 2021 07:20:13 +0000, by Mychaela Falconia
-
MCL: assign value to all capacitorsThu, 02 Dec 2021 05:53:13 +0000, by Mychaela Falconia
-
change USB 6.0 MHz crystal to a smaller partThu, 02 Dec 2021 01:35:34 +0000, by Mychaela Falconia
-
change SMA connector from SMT to THThu, 02 Dec 2021 00:36:28 +0000, by Mychaela Falconia
-
venus/src/Makefile: unet-bind -c to check completenessWed, 01 Dec 2021 21:47:20 +0000, by Mychaela Falconia
-
add manual RESET buttonWed, 01 Dec 2021 21:45:42 +0000, by Mychaela Falconia
-
buzzer circuit implementedWed, 01 Dec 2021 20:22:47 +0000, by Mychaela Falconia
-
clamping diode pair for the buzzer driving circuitWed, 01 Dec 2021 19:26:29 +0000, by Mychaela Falconia
-
transistor for driving the buzzerWed, 01 Dec 2021 18:39:48 +0000, by Mychaela Falconia
-
buzzer component nailed downWed, 01 Dec 2021 06:50:25 +0000, by Mychaela Falconia
-
loudspeaker block implementedWed, 01 Dec 2021 04:08:35 +0000, by Mychaela Falconia
-
HSO audio channel implementedWed, 01 Dec 2021 03:26:15 +0000, by Mychaela Falconia
-
main audio channel implementedWed, 01 Dec 2021 02:22:39 +0000, by Mychaela Falconia