FreeCalypso > hg > freecalypso-schem2
graph
-
change flash+RAM MCP to S71PL129NFri, 10 Dec 2021 06:43:39 +0000, by Mychaela Falconia
-
add 74AXP1T34 buffer for flash resetFri, 10 Dec 2021 06:20:19 +0000, by Mychaela Falconia
-
first preparations for changing flash+RAM MCP to S71PL129NFri, 10 Dec 2021 05:58:58 +0000, by Mychaela Falconia
-
doc/USB-and-mobile-domains: document UART rescue headerWed, 08 Dec 2021 07:36:45 +0000, by Mychaela Falconia
-
add 3-pin header for possible external boot controlWed, 08 Dec 2021 05:32:47 +0000, by Mychaela Falconia
-
add UART rescue headerWed, 08 Dec 2021 05:00:50 +0000, by Mychaela Falconia
-
capture initial population of RLC67[0-5]Sun, 05 Dec 2021 04:41:45 +0000, by Mychaela Falconia
-
charging LED series resistor nailed downSun, 05 Dec 2021 04:27:10 +0000, by Mychaela Falconia
-
R407 intnoconn: use different terminal numbering on further thoughtSun, 05 Dec 2021 03:49:14 +0000, by Mychaela Falconia
-
charging current sense resistor nailed downSun, 05 Dec 2021 03:38:33 +0000, by Mychaela Falconia
-
precharge current limiting resistor nailed downSun, 05 Dec 2021 03:07:45 +0000, by Mychaela Falconia
-
MCL resistors: convert to parts (except USB domain)Sat, 04 Dec 2021 20:10:18 +0000, by Mychaela Falconia
-
MCL part header-2pin: list the gold-plated versionSat, 04 Dec 2021 19:02:14 +0000, by Mychaela Falconia
-
found a seemingly-suitable part for Q401Fri, 03 Dec 2021 20:58:04 +0000, by Mychaela Falconia
-
new 3.3V USB LDO regulator part, direct replacementFri, 03 Dec 2021 07:56:26 +0000, by Mychaela Falconia
-
new 32.768 kHz crystal part, same specs as beforeFri, 03 Dec 2021 02:51:51 +0000, by Mychaela Falconia
-
MCL inductors: convert to partsFri, 03 Dec 2021 02:13:59 +0000, by Mychaela Falconia
-
manual RESET button new part: 260 g force, shorter actuatorThu, 02 Dec 2021 22:40:39 +0000, by Mychaela Falconia
-
MCL capacitors: convert to partsThu, 02 Dec 2021 07:20:13 +0000, by Mychaela Falconia
-
MCL: assign value to all capacitorsThu, 02 Dec 2021 05:53:13 +0000, by Mychaela Falconia
-
change USB 6.0 MHz crystal to a smaller partThu, 02 Dec 2021 01:35:34 +0000, by Mychaela Falconia
-
change SMA connector from SMT to THThu, 02 Dec 2021 00:36:28 +0000, by Mychaela Falconia
-
venus/src/Makefile: unet-bind -c to check completenessWed, 01 Dec 2021 21:47:20 +0000, by Mychaela Falconia
-
add manual RESET buttonWed, 01 Dec 2021 21:45:42 +0000, by Mychaela Falconia
-
buzzer circuit implementedWed, 01 Dec 2021 20:22:47 +0000, by Mychaela Falconia
-
clamping diode pair for the buzzer driving circuitWed, 01 Dec 2021 19:26:29 +0000, by Mychaela Falconia
-
transistor for driving the buzzerWed, 01 Dec 2021 18:39:48 +0000, by Mychaela Falconia
-
buzzer component nailed downWed, 01 Dec 2021 06:50:25 +0000, by Mychaela Falconia
-
loudspeaker block implementedWed, 01 Dec 2021 04:08:35 +0000, by Mychaela Falconia
-
HSO audio channel implementedWed, 01 Dec 2021 03:26:15 +0000, by Mychaela Falconia
-
main audio channel implementedWed, 01 Dec 2021 02:22:39 +0000, by Mychaela Falconia
-
VSP sniff tap implementedSat, 27 Nov 2021 20:43:23 +0000, by Mychaela Falconia
-
add VBAT tap for calibration measurementsSat, 27 Nov 2021 20:01:56 +0000, by Mychaela Falconia
-
LPG and PWL LEDs implementedSat, 27 Nov 2021 19:46:01 +0000, by Mychaela Falconia
-
MCL: prebiased transistor pair partsSat, 27 Nov 2021 19:16:58 +0000, by Mychaela Falconia
-
ON_nOFF indicator LED implementedSat, 27 Nov 2021 18:34:05 +0000, by Mychaela Falconia
-
keypad initial implementationSat, 27 Nov 2021 07:03:14 +0000, by Mychaela Falconia
-
Verilog src: preparations for adding the keypadSat, 27 Nov 2021 04:43:53 +0000, by Mychaela Falconia
-
MCL: preliminary part selection for keypad switchesSat, 27 Nov 2021 04:25:30 +0000, by Mychaela Falconia
-
LCD subsystem integratedSat, 27 Nov 2021 02:46:19 +0000, by Mychaela Falconia
-
progress toward LCD integrationSat, 27 Nov 2021 02:09:46 +0000, by Mychaela Falconia
-
MAX1916.v and lcd_module.v from lunalcd2Sat, 27 Nov 2021 01:43:32 +0000, by Mychaela Falconia
-
74LVC2G125 buffer for BL control captured at MCL levelSat, 27 Nov 2021 01:34:05 +0000, by Mychaela Falconia
-
MCL and primitives: LCD and MAX1916 from lunalcd2Sat, 27 Nov 2021 01:09:05 +0000, by Mychaela Falconia
-
add top READMESat, 27 Nov 2021 00:25:20 +0000, by Mychaela Falconia
-
add missing bypass caps for mobile domain peripheralsFri, 26 Nov 2021 23:45:48 +0000, by Mychaela Falconia
-
charging_circuit structural module contains no connections to GNDFri, 26 Nov 2021 23:32:00 +0000, by Mychaela Falconia
-
use buffer_slot_od primitive for slots of 74LVC2G07Fri, 26 Nov 2021 23:18:12 +0000, by Mychaela Falconia
-
implement USB domain load resistor as proposed in documentFri, 26 Nov 2021 23:08:09 +0000, by Mychaela Falconia
-
venus/doc/USB-and-mobile-domains treatise writtenFri, 26 Nov 2021 23:02:19 +0000, by Mychaela Falconia
-
venus/doc/MEMIF-fixed-2.8V: explanatory articleWed, 24 Nov 2021 18:14:11 +0000, by Mychaela Falconia
-
eliminate R209 and tie Iota VLMEM directly to UPRMon, 22 Nov 2021 19:19:59 +0000, by Mychaela Falconia
-
starpoints in core: commit to using pcb-rnd intnoconnMon, 22 Nov 2021 09:54:48 +0000, by Mychaela Falconia
-
charging LED circuit capturedMon, 22 Nov 2021 03:25:55 +0000, by Mychaela Falconia
-
intnoconn approach to charging current sense resistorMon, 22 Nov 2021 03:03:15 +0000, by Mychaela Falconia
-
Venus src: charging circuit capturedSun, 21 Nov 2021 20:20:38 +0000, by Mychaela Falconia
-
Venus MCL: use new ipc-diode.pinout, add SS34 for chargingSun, 21 Nov 2021 08:58:43 +0000, by Mychaela Falconia
-
Venus MCL: add Q401 charging circuit MOSFETSun, 21 Nov 2021 08:40:13 +0000, by Mychaela Falconia
-
venus/src/Makefile: generate bound.unetSun, 21 Nov 2021 03:14:56 +0000, by Mychaela Falconia
-
Venus MCL: ready for first bindingSun, 21 Nov 2021 03:05:26 +0000, by Mychaela Falconia
-
Venus MCL: first steps toward binding,Sun, 21 Nov 2021 02:14:49 +0000, by Mychaela Falconia
-
Venus: reached the point of compiling sverp.unetSat, 20 Nov 2021 21:54:27 +0000, by Mychaela Falconia
-
Venus: preliminary choice of slide switch part for charging controlSat, 20 Nov 2021 21:12:23 +0000, by Mychaela Falconia
-
Venus src: USB domain capturedSat, 20 Nov 2021 19:44:59 +0000, by Mychaela Falconia
-
venus/src/usb: building blocks from DUART28Sat, 20 Nov 2021 17:48:18 +0000, by Mychaela Falconia
-
Venus primitives: additions for USBSat, 20 Nov 2021 09:10:02 +0000, by Mychaela Falconia
-
Venus MCL: smaller package for USB EEPROMSat, 20 Nov 2021 08:32:54 +0000, by Mychaela Falconia
-
Venus MCL: USB connector and ICs from DUART28Sat, 20 Nov 2021 06:19:00 +0000, by Mychaela Falconia
-
venus/src/top/mobile.v writtenSat, 20 Nov 2021 05:45:37 +0000, by Mychaela Falconia
-
Venus src: jtag_if.v adapted from FCDEV3BSat, 20 Nov 2021 04:32:50 +0000, by Mychaela Falconia
-
Venus src: SIM socket block capturedFri, 19 Nov 2021 20:59:14 +0000, by Mychaela Falconia
-
Venus src: add 74LVC1G04 inverting buffer for SIM_CDFri, 19 Nov 2021 20:35:10 +0000, by Mychaela Falconia
-
venus/src/periph/calypso_uart_in.v writtenFri, 19 Nov 2021 20:10:46 +0000, by Mychaela Falconia
-
Venus primitives: add logic IC subpackagesFri, 19 Nov 2021 19:46:03 +0000, by Mychaela Falconia
-
Venus MCL: add 74LVC125A for Calypso UART inputsFri, 19 Nov 2021 18:57:57 +0000, by Mychaela Falconia
-
venus/src/periph/battery.v: adapted from FCDEV3BFri, 19 Nov 2021 06:48:25 +0000, by Mychaela Falconia
-
venus/src/periph/sma_wrap.v: unchanged from FCDEV3BFri, 19 Nov 2021 06:44:53 +0000, by Mychaela Falconia
-
Venus core: bring out SIM_CDFri, 19 Nov 2021 06:09:13 +0000, by Mychaela Falconia
-
Venus: first version of Verilog for the Calypso coreFri, 19 Nov 2021 05:58:21 +0000, by Mychaela Falconia
-
Venus primitives: add TRRS jackFri, 19 Nov 2021 03:47:49 +0000, by Mychaela Falconia
-
Venus MCL: add audio jacksFri, 19 Nov 2021 03:44:51 +0000, by Mychaela Falconia
-
Venus primitives file startedFri, 19 Nov 2021 03:07:48 +0000, by Mychaela Falconia
-
Venus MCL: add LEDsFri, 19 Nov 2021 01:43:41 +0000, by Mychaela Falconia
-
Venus MCL: connectors from FCDEV3BFri, 19 Nov 2021 01:02:52 +0000, by Mychaela Falconia
-
venus/src/pinouts: from FCDEV3B and TangoFri, 19 Nov 2021 00:35:01 +0000, by Mychaela Falconia
-
Venus MCL: put Epcos FEM at U601Fri, 19 Nov 2021 00:26:08 +0000, by Mychaela Falconia
-
Venus MCL: specify X201 32.768 kHz crystalFri, 19 Nov 2021 00:24:16 +0000, by Mychaela Falconia
-
Venus MCL: starting with major componentsThu, 18 Nov 2021 23:35:57 +0000, by Mychaela Falconia