FreeCalypso > hg > freecalypso-schem2
graph
-
minnie/doc/Design-spec: beginning of document18 months ago, by Mychaela Falconia
-
U403: change from 74LVC2G125 to 74LVC2G1262022-05-09, by Mychaela Falconia
-
D404 SS34: fully specify part (sourced from Digi-Key)2022-01-11, by Mychaela Falconia
-
D405: use Nexperia part sourced from Digi-Key direct2022-01-11, by Mychaela Falconia
-
change VSP tap header to 6 pins, add CLK13M2021-12-11, by Mychaela Falconia
-
add RTC domain test points2021-12-11, by Mychaela Falconia
-
venus/doc/MEMIF-fixed-2.8V: update for new MCP2021-12-11, by Mychaela Falconia
-
venus/doc/Flash+RAM: R372 addition documented2021-12-10, by Mychaela Falconia
-
add option of reverting to Calypso FDP for flash reset2021-12-10, by Mychaela Falconia
-
venus/doc/Flash+RAM written2021-12-10, by Mychaela Falconia
-
change flash+RAM MCP to S71PL129N2021-12-10, by Mychaela Falconia
-
add 74AXP1T34 buffer for flash reset2021-12-10, by Mychaela Falconia
-
first preparations for changing flash+RAM MCP to S71PL129N2021-12-10, by Mychaela Falconia
-
doc/USB-and-mobile-domains: document UART rescue header2021-12-08, by Mychaela Falconia
-
add 3-pin header for possible external boot control2021-12-08, by Mychaela Falconia
-
add UART rescue header2021-12-08, by Mychaela Falconia
-
capture initial population of RLC67[0-5]2021-12-05, by Mychaela Falconia
-
charging LED series resistor nailed down2021-12-05, by Mychaela Falconia
-
R407 intnoconn: use different terminal numbering on further thought2021-12-05, by Mychaela Falconia
-
charging current sense resistor nailed down2021-12-05, by Mychaela Falconia
-
precharge current limiting resistor nailed down2021-12-05, by Mychaela Falconia
-
MCL resistors: convert to parts (except USB domain)2021-12-04, by Mychaela Falconia
-
MCL part header-2pin: list the gold-plated version2021-12-04, by Mychaela Falconia
-
found a seemingly-suitable part for Q4012021-12-03, by Mychaela Falconia
-
new 3.3V USB LDO regulator part, direct replacement2021-12-03, by Mychaela Falconia
-
new 32.768 kHz crystal part, same specs as before2021-12-03, by Mychaela Falconia
-
MCL inductors: convert to parts2021-12-03, by Mychaela Falconia
-
manual RESET button new part: 260 g force, shorter actuator2021-12-02, by Mychaela Falconia
-
MCL capacitors: convert to parts2021-12-02, by Mychaela Falconia
-
MCL: assign value to all capacitors2021-12-02, by Mychaela Falconia
-
change USB 6.0 MHz crystal to a smaller part2021-12-02, by Mychaela Falconia
-
change SMA connector from SMT to TH2021-12-02, by Mychaela Falconia
-
venus/src/Makefile: unet-bind -c to check completeness2021-12-01, by Mychaela Falconia
-
add manual RESET button2021-12-01, by Mychaela Falconia
-
buzzer circuit implemented2021-12-01, by Mychaela Falconia
-
clamping diode pair for the buzzer driving circuit2021-12-01, by Mychaela Falconia
-
transistor for driving the buzzer2021-12-01, by Mychaela Falconia
-
buzzer component nailed down2021-12-01, by Mychaela Falconia
-
loudspeaker block implemented2021-12-01, by Mychaela Falconia
-
HSO audio channel implemented2021-12-01, by Mychaela Falconia
-
main audio channel implemented2021-12-01, by Mychaela Falconia
-
VSP sniff tap implemented2021-11-27, by Mychaela Falconia
-
add VBAT tap for calibration measurements2021-11-27, by Mychaela Falconia
-
LPG and PWL LEDs implemented2021-11-27, by Mychaela Falconia
-
MCL: prebiased transistor pair parts2021-11-27, by Mychaela Falconia
-
ON_nOFF indicator LED implemented2021-11-27, by Mychaela Falconia
-
keypad initial implementation2021-11-27, by Mychaela Falconia
-
Verilog src: preparations for adding the keypad2021-11-27, by Mychaela Falconia
-
MCL: preliminary part selection for keypad switches2021-11-27, by Mychaela Falconia
-
LCD subsystem integrated2021-11-27, by Mychaela Falconia
-
progress toward LCD integration2021-11-27, by Mychaela Falconia
-
MAX1916.v and lcd_module.v from lunalcd22021-11-27, by Mychaela Falconia
-
74LVC2G125 buffer for BL control captured at MCL level2021-11-27, by Mychaela Falconia
-
MCL and primitives: LCD and MAX1916 from lunalcd22021-11-27, by Mychaela Falconia
-
add top README2021-11-27, by Mychaela Falconia
-
add missing bypass caps for mobile domain peripherals2021-11-26, by Mychaela Falconia
-
charging_circuit structural module contains no connections to GND2021-11-26, by Mychaela Falconia
-
use buffer_slot_od primitive for slots of 74LVC2G072021-11-26, by Mychaela Falconia
-
implement USB domain load resistor as proposed in document2021-11-26, by Mychaela Falconia