| Sun, 01 Oct 2023 08:17:05 +0000 |
Mychaela Falconia |
minnie/doc/Design-spec: finished in the first pass
default tip
|
| Sun, 01 Oct 2023 07:01:56 +0000 |
Mychaela Falconia |
minnie/doc/Design-spec: beginning of document
|
| Mon, 09 May 2022 19:27:11 +0000 |
Mychaela Falconia |
U403: change from 74LVC2G125 to 74LVC2G126
|
| Tue, 11 Jan 2022 19:38:57 +0000 |
Mychaela Falconia |
D404 SS34: fully specify part (sourced from Digi-Key)
|
| Tue, 11 Jan 2022 19:11:22 +0000 |
Mychaela Falconia |
D405: use Nexperia part sourced from Digi-Key direct
|
| Sat, 11 Dec 2021 05:38:21 +0000 |
Mychaela Falconia |
change VSP tap header to 6 pins, add CLK13M
|
| Sat, 11 Dec 2021 04:48:30 +0000 |
Mychaela Falconia |
add RTC domain test points
|
| Sat, 11 Dec 2021 03:34:04 +0000 |
Mychaela Falconia |
venus/doc/MEMIF-fixed-2.8V: update for new MCP
|
| Fri, 10 Dec 2021 23:00:44 +0000 |
Mychaela Falconia |
venus/doc/Flash+RAM: R372 addition documented
|
| Fri, 10 Dec 2021 22:40:08 +0000 |
Mychaela Falconia |
add option of reverting to Calypso FDP for flash reset
|
| Fri, 10 Dec 2021 20:26:05 +0000 |
Mychaela Falconia |
venus/doc/Flash+RAM written
|
| Fri, 10 Dec 2021 06:43:39 +0000 |
Mychaela Falconia |
change flash+RAM MCP to S71PL129N
|
| Fri, 10 Dec 2021 06:20:19 +0000 |
Mychaela Falconia |
add 74AXP1T34 buffer for flash reset
|
| Fri, 10 Dec 2021 05:58:58 +0000 |
Mychaela Falconia |
first preparations for changing flash+RAM MCP to S71PL129N
|
| Wed, 08 Dec 2021 07:36:45 +0000 |
Mychaela Falconia |
doc/USB-and-mobile-domains: document UART rescue header
|
| Wed, 08 Dec 2021 05:32:47 +0000 |
Mychaela Falconia |
add 3-pin header for possible external boot control
|
| Wed, 08 Dec 2021 05:00:50 +0000 |
Mychaela Falconia |
add UART rescue header
|
| Sun, 05 Dec 2021 04:41:45 +0000 |
Mychaela Falconia |
capture initial population of RLC67[0-5]
|
| Sun, 05 Dec 2021 04:27:10 +0000 |
Mychaela Falconia |
charging LED series resistor nailed down
|
| Sun, 05 Dec 2021 03:49:14 +0000 |
Mychaela Falconia |
R407 intnoconn: use different terminal numbering on further thought
|
| Sun, 05 Dec 2021 03:38:33 +0000 |
Mychaela Falconia |
charging current sense resistor nailed down
|
| Sun, 05 Dec 2021 03:07:45 +0000 |
Mychaela Falconia |
precharge current limiting resistor nailed down
|
| Sat, 04 Dec 2021 20:10:18 +0000 |
Mychaela Falconia |
MCL resistors: convert to parts (except USB domain)
|
| Sat, 04 Dec 2021 19:02:14 +0000 |
Mychaela Falconia |
MCL part header-2pin: list the gold-plated version
|
| Fri, 03 Dec 2021 20:58:04 +0000 |
Mychaela Falconia |
found a seemingly-suitable part for Q401
|
| Fri, 03 Dec 2021 07:56:26 +0000 |
Mychaela Falconia |
new 3.3V USB LDO regulator part, direct replacement
|
| Fri, 03 Dec 2021 02:51:51 +0000 |
Mychaela Falconia |
new 32.768 kHz crystal part, same specs as before
|
| Fri, 03 Dec 2021 02:13:59 +0000 |
Mychaela Falconia |
MCL inductors: convert to parts
|
| Thu, 02 Dec 2021 22:40:39 +0000 |
Mychaela Falconia |
manual RESET button new part: 260 g force, shorter actuator
|
| Thu, 02 Dec 2021 07:20:13 +0000 |
Mychaela Falconia |
MCL capacitors: convert to parts
|
| Thu, 02 Dec 2021 05:53:13 +0000 |
Mychaela Falconia |
MCL: assign value to all capacitors
|
| Thu, 02 Dec 2021 01:35:34 +0000 |
Mychaela Falconia |
change USB 6.0 MHz crystal to a smaller part
|
| Thu, 02 Dec 2021 00:36:28 +0000 |
Mychaela Falconia |
change SMA connector from SMT to TH
|
| Wed, 01 Dec 2021 21:47:20 +0000 |
Mychaela Falconia |
venus/src/Makefile: unet-bind -c to check completeness
|
| Wed, 01 Dec 2021 21:45:42 +0000 |
Mychaela Falconia |
add manual RESET button
|
| Wed, 01 Dec 2021 20:22:47 +0000 |
Mychaela Falconia |
buzzer circuit implemented
|
| Wed, 01 Dec 2021 19:26:29 +0000 |
Mychaela Falconia |
clamping diode pair for the buzzer driving circuit
|
| Wed, 01 Dec 2021 18:39:48 +0000 |
Mychaela Falconia |
transistor for driving the buzzer
|
| Wed, 01 Dec 2021 06:50:25 +0000 |
Mychaela Falconia |
buzzer component nailed down
|
| Wed, 01 Dec 2021 04:08:35 +0000 |
Mychaela Falconia |
loudspeaker block implemented
|
| Wed, 01 Dec 2021 03:26:15 +0000 |
Mychaela Falconia |
HSO audio channel implemented
|
| Wed, 01 Dec 2021 02:22:39 +0000 |
Mychaela Falconia |
main audio channel implemented
|
| Sat, 27 Nov 2021 20:43:23 +0000 |
Mychaela Falconia |
VSP sniff tap implemented
|
| Sat, 27 Nov 2021 20:01:56 +0000 |
Mychaela Falconia |
add VBAT tap for calibration measurements
|
| Sat, 27 Nov 2021 19:46:01 +0000 |
Mychaela Falconia |
LPG and PWL LEDs implemented
|
| Sat, 27 Nov 2021 19:16:58 +0000 |
Mychaela Falconia |
MCL: prebiased transistor pair parts
|
| Sat, 27 Nov 2021 18:34:05 +0000 |
Mychaela Falconia |
ON_nOFF indicator LED implemented
|
| Sat, 27 Nov 2021 07:03:14 +0000 |
Mychaela Falconia |
keypad initial implementation
|
| Sat, 27 Nov 2021 04:43:53 +0000 |
Mychaela Falconia |
Verilog src: preparations for adding the keypad
|
| Sat, 27 Nov 2021 04:25:30 +0000 |
Mychaela Falconia |
MCL: preliminary part selection for keypad switches
|
| Sat, 27 Nov 2021 02:46:19 +0000 |
Mychaela Falconia |
LCD subsystem integrated
|
| Sat, 27 Nov 2021 02:09:46 +0000 |
Mychaela Falconia |
progress toward LCD integration
|
| Sat, 27 Nov 2021 01:43:32 +0000 |
Mychaela Falconia |
MAX1916.v and lcd_module.v from lunalcd2
|
| Sat, 27 Nov 2021 01:34:05 +0000 |
Mychaela Falconia |
74LVC2G125 buffer for BL control captured at MCL level
|
| Sat, 27 Nov 2021 01:09:05 +0000 |
Mychaela Falconia |
MCL and primitives: LCD and MAX1916 from lunalcd2
|
| Sat, 27 Nov 2021 00:25:20 +0000 |
Mychaela Falconia |
add top README
|
| Fri, 26 Nov 2021 23:45:48 +0000 |
Mychaela Falconia |
add missing bypass caps for mobile domain peripherals
|
| Fri, 26 Nov 2021 23:32:00 +0000 |
Mychaela Falconia |
charging_circuit structural module contains no connections to GND
|
| Fri, 26 Nov 2021 23:18:12 +0000 |
Mychaela Falconia |
use buffer_slot_od primitive for slots of 74LVC2G07
|
| Fri, 26 Nov 2021 23:08:09 +0000 |
Mychaela Falconia |
implement USB domain load resistor as proposed in document
|
| Fri, 26 Nov 2021 23:02:19 +0000 |
Mychaela Falconia |
venus/doc/USB-and-mobile-domains treatise written
|
| Wed, 24 Nov 2021 18:14:11 +0000 |
Mychaela Falconia |
venus/doc/MEMIF-fixed-2.8V: explanatory article
|
| Mon, 22 Nov 2021 19:19:59 +0000 |
Mychaela Falconia |
eliminate R209 and tie Iota VLMEM directly to UPR
|
| Mon, 22 Nov 2021 09:54:48 +0000 |
Mychaela Falconia |
starpoints in core: commit to using pcb-rnd intnoconn
|
| Mon, 22 Nov 2021 03:25:55 +0000 |
Mychaela Falconia |
charging LED circuit captured
|
| Mon, 22 Nov 2021 03:03:15 +0000 |
Mychaela Falconia |
intnoconn approach to charging current sense resistor
|
| Sun, 21 Nov 2021 20:20:38 +0000 |
Mychaela Falconia |
Venus src: charging circuit captured
|
| Sun, 21 Nov 2021 08:58:43 +0000 |
Mychaela Falconia |
Venus MCL: use new ipc-diode.pinout, add SS34 for charging
|
| Sun, 21 Nov 2021 08:40:13 +0000 |
Mychaela Falconia |
Venus MCL: add Q401 charging circuit MOSFET
|
| Sun, 21 Nov 2021 03:14:56 +0000 |
Mychaela Falconia |
venus/src/Makefile: generate bound.unet
|
| Sun, 21 Nov 2021 03:05:26 +0000 |
Mychaela Falconia |
Venus MCL: ready for first binding
|
| Sun, 21 Nov 2021 02:14:49 +0000 |
Mychaela Falconia |
Venus MCL: first steps toward binding,
|
| Sat, 20 Nov 2021 21:54:27 +0000 |
Mychaela Falconia |
Venus: reached the point of compiling sverp.unet
|
| Sat, 20 Nov 2021 21:12:23 +0000 |
Mychaela Falconia |
Venus: preliminary choice of slide switch part for charging control
|
| Sat, 20 Nov 2021 19:44:59 +0000 |
Mychaela Falconia |
Venus src: USB domain captured
|
| Sat, 20 Nov 2021 17:48:18 +0000 |
Mychaela Falconia |
venus/src/usb: building blocks from DUART28
|
| Sat, 20 Nov 2021 09:10:02 +0000 |
Mychaela Falconia |
Venus primitives: additions for USB
|
| Sat, 20 Nov 2021 08:32:54 +0000 |
Mychaela Falconia |
Venus MCL: smaller package for USB EEPROM
|
| Sat, 20 Nov 2021 06:19:00 +0000 |
Mychaela Falconia |
Venus MCL: USB connector and ICs from DUART28
|
| Sat, 20 Nov 2021 05:45:37 +0000 |
Mychaela Falconia |
venus/src/top/mobile.v written
|
| Sat, 20 Nov 2021 04:32:50 +0000 |
Mychaela Falconia |
Venus src: jtag_if.v adapted from FCDEV3B
|
| Fri, 19 Nov 2021 20:59:14 +0000 |
Mychaela Falconia |
Venus src: SIM socket block captured
|
| Fri, 19 Nov 2021 20:35:10 +0000 |
Mychaela Falconia |
Venus src: add 74LVC1G04 inverting buffer for SIM_CD
|
| Fri, 19 Nov 2021 20:10:46 +0000 |
Mychaela Falconia |
venus/src/periph/calypso_uart_in.v written
|
| Fri, 19 Nov 2021 19:46:03 +0000 |
Mychaela Falconia |
Venus primitives: add logic IC subpackages
|
| Fri, 19 Nov 2021 18:57:57 +0000 |
Mychaela Falconia |
Venus MCL: add 74LVC125A for Calypso UART inputs
|
| Fri, 19 Nov 2021 06:48:25 +0000 |
Mychaela Falconia |
venus/src/periph/battery.v: adapted from FCDEV3B
|
| Fri, 19 Nov 2021 06:44:53 +0000 |
Mychaela Falconia |
venus/src/periph/sma_wrap.v: unchanged from FCDEV3B
|
| Fri, 19 Nov 2021 06:09:13 +0000 |
Mychaela Falconia |
Venus core: bring out SIM_CD
|
| Fri, 19 Nov 2021 05:58:21 +0000 |
Mychaela Falconia |
Venus: first version of Verilog for the Calypso core
|
| Fri, 19 Nov 2021 03:47:49 +0000 |
Mychaela Falconia |
Venus primitives: add TRRS jack
|
| Fri, 19 Nov 2021 03:44:51 +0000 |
Mychaela Falconia |
Venus MCL: add audio jacks
|
| Fri, 19 Nov 2021 03:07:48 +0000 |
Mychaela Falconia |
Venus primitives file started
|
| Fri, 19 Nov 2021 01:43:41 +0000 |
Mychaela Falconia |
Venus MCL: add LEDs
|
| Fri, 19 Nov 2021 01:02:52 +0000 |
Mychaela Falconia |
Venus MCL: connectors from FCDEV3B
|
| Fri, 19 Nov 2021 00:35:01 +0000 |
Mychaela Falconia |
venus/src/pinouts: from FCDEV3B and Tango
|
| Fri, 19 Nov 2021 00:26:08 +0000 |
Mychaela Falconia |
Venus MCL: put Epcos FEM at U601
|
| Fri, 19 Nov 2021 00:24:16 +0000 |
Mychaela Falconia |
Venus MCL: specify X201 32.768 kHz crystal
|
| Thu, 18 Nov 2021 23:35:57 +0000 |
Mychaela Falconia |
Venus MCL: starting with major components
|
