| Sun, 01 Oct 2023 08:17:05 +0000 |
Mychaela Falconia |
minnie/doc/Design-spec: finished in the first pass
default tip
|
| Sun, 01 Oct 2023 07:01:56 +0000 |
Mychaela Falconia |
minnie/doc/Design-spec: beginning of document
|
| Mon, 09 May 2022 19:27:11 +0000 |
Mychaela Falconia |
U403: change from 74LVC2G125 to 74LVC2G126
|
| Tue, 11 Jan 2022 19:38:57 +0000 |
Mychaela Falconia |
D404 SS34: fully specify part (sourced from Digi-Key)
|
| Tue, 11 Jan 2022 19:11:22 +0000 |
Mychaela Falconia |
D405: use Nexperia part sourced from Digi-Key direct
|
| Sat, 11 Dec 2021 05:38:21 +0000 |
Mychaela Falconia |
change VSP tap header to 6 pins, add CLK13M
|
| Sat, 11 Dec 2021 04:48:30 +0000 |
Mychaela Falconia |
add RTC domain test points
|
| Sat, 11 Dec 2021 03:34:04 +0000 |
Mychaela Falconia |
venus/doc/MEMIF-fixed-2.8V: update for new MCP
|
| Fri, 10 Dec 2021 23:00:44 +0000 |
Mychaela Falconia |
venus/doc/Flash+RAM: R372 addition documented
|
| Fri, 10 Dec 2021 22:40:08 +0000 |
Mychaela Falconia |
add option of reverting to Calypso FDP for flash reset
|
| Fri, 10 Dec 2021 20:26:05 +0000 |
Mychaela Falconia |
venus/doc/Flash+RAM written
|
| Fri, 10 Dec 2021 06:43:39 +0000 |
Mychaela Falconia |
change flash+RAM MCP to S71PL129N
|
| Fri, 10 Dec 2021 06:20:19 +0000 |
Mychaela Falconia |
add 74AXP1T34 buffer for flash reset
|
| Fri, 10 Dec 2021 05:58:58 +0000 |
Mychaela Falconia |
first preparations for changing flash+RAM MCP to S71PL129N
|
| Wed, 08 Dec 2021 07:36:45 +0000 |
Mychaela Falconia |
doc/USB-and-mobile-domains: document UART rescue header
|
| Wed, 08 Dec 2021 05:32:47 +0000 |
Mychaela Falconia |
add 3-pin header for possible external boot control
|
| Wed, 08 Dec 2021 05:00:50 +0000 |
Mychaela Falconia |
add UART rescue header
|
| Sun, 05 Dec 2021 04:41:45 +0000 |
Mychaela Falconia |
capture initial population of RLC67[0-5]
|
| Sun, 05 Dec 2021 04:27:10 +0000 |
Mychaela Falconia |
charging LED series resistor nailed down
|
| Sun, 05 Dec 2021 03:49:14 +0000 |
Mychaela Falconia |
R407 intnoconn: use different terminal numbering on further thought
|
| Sun, 05 Dec 2021 03:38:33 +0000 |
Mychaela Falconia |
charging current sense resistor nailed down
|
| Sun, 05 Dec 2021 03:07:45 +0000 |
Mychaela Falconia |
precharge current limiting resistor nailed down
|
| Sat, 04 Dec 2021 20:10:18 +0000 |
Mychaela Falconia |
MCL resistors: convert to parts (except USB domain)
|
| Sat, 04 Dec 2021 19:02:14 +0000 |
Mychaela Falconia |
MCL part header-2pin: list the gold-plated version
|
| Fri, 03 Dec 2021 20:58:04 +0000 |
Mychaela Falconia |
found a seemingly-suitable part for Q401
|
| Fri, 03 Dec 2021 07:56:26 +0000 |
Mychaela Falconia |
new 3.3V USB LDO regulator part, direct replacement
|
| Fri, 03 Dec 2021 02:51:51 +0000 |
Mychaela Falconia |
new 32.768 kHz crystal part, same specs as before
|
| Fri, 03 Dec 2021 02:13:59 +0000 |
Mychaela Falconia |
MCL inductors: convert to parts
|
| Thu, 02 Dec 2021 22:40:39 +0000 |
Mychaela Falconia |
manual RESET button new part: 260 g force, shorter actuator
|
| Thu, 02 Dec 2021 07:20:13 +0000 |
Mychaela Falconia |
MCL capacitors: convert to parts
|
| Thu, 02 Dec 2021 05:53:13 +0000 |
Mychaela Falconia |
MCL: assign value to all capacitors
|
| Thu, 02 Dec 2021 01:35:34 +0000 |
Mychaela Falconia |
change USB 6.0 MHz crystal to a smaller part
|
| Thu, 02 Dec 2021 00:36:28 +0000 |
Mychaela Falconia |
change SMA connector from SMT to TH
|
| Wed, 01 Dec 2021 21:47:20 +0000 |
Mychaela Falconia |
venus/src/Makefile: unet-bind -c to check completeness
|
| Wed, 01 Dec 2021 21:45:42 +0000 |
Mychaela Falconia |
add manual RESET button
|
| Wed, 01 Dec 2021 20:22:47 +0000 |
Mychaela Falconia |
buzzer circuit implemented
|
| Wed, 01 Dec 2021 19:26:29 +0000 |
Mychaela Falconia |
clamping diode pair for the buzzer driving circuit
|
| Wed, 01 Dec 2021 18:39:48 +0000 |
Mychaela Falconia |
transistor for driving the buzzer
|
| Wed, 01 Dec 2021 06:50:25 +0000 |
Mychaela Falconia |
buzzer component nailed down
|
| Wed, 01 Dec 2021 04:08:35 +0000 |
Mychaela Falconia |
loudspeaker block implemented
|
| Wed, 01 Dec 2021 03:26:15 +0000 |
Mychaela Falconia |
HSO audio channel implemented
|
| Wed, 01 Dec 2021 02:22:39 +0000 |
Mychaela Falconia |
main audio channel implemented
|
| Sat, 27 Nov 2021 20:43:23 +0000 |
Mychaela Falconia |
VSP sniff tap implemented
|
| Sat, 27 Nov 2021 20:01:56 +0000 |
Mychaela Falconia |
add VBAT tap for calibration measurements
|
| Sat, 27 Nov 2021 19:46:01 +0000 |
Mychaela Falconia |
LPG and PWL LEDs implemented
|
| Sat, 27 Nov 2021 19:16:58 +0000 |
Mychaela Falconia |
MCL: prebiased transistor pair parts
|
| Sat, 27 Nov 2021 18:34:05 +0000 |
Mychaela Falconia |
ON_nOFF indicator LED implemented
|
| Sat, 27 Nov 2021 07:03:14 +0000 |
Mychaela Falconia |
keypad initial implementation
|
| Sat, 27 Nov 2021 04:43:53 +0000 |
Mychaela Falconia |
Verilog src: preparations for adding the keypad
|
| Sat, 27 Nov 2021 04:25:30 +0000 |
Mychaela Falconia |
MCL: preliminary part selection for keypad switches
|
| Sat, 27 Nov 2021 02:46:19 +0000 |
Mychaela Falconia |
LCD subsystem integrated
|
| Sat, 27 Nov 2021 02:09:46 +0000 |
Mychaela Falconia |
progress toward LCD integration
|
| Sat, 27 Nov 2021 01:43:32 +0000 |
Mychaela Falconia |
MAX1916.v and lcd_module.v from lunalcd2
|
| Sat, 27 Nov 2021 01:34:05 +0000 |
Mychaela Falconia |
74LVC2G125 buffer for BL control captured at MCL level
|
| Sat, 27 Nov 2021 01:09:05 +0000 |
Mychaela Falconia |
MCL and primitives: LCD and MAX1916 from lunalcd2
|
| Sat, 27 Nov 2021 00:25:20 +0000 |
Mychaela Falconia |
add top README
|
