FreeCalypso > hg > freecalypso-sw
annotate doc/Pirelli-Howto @ 967:6475a935e593
doc/Host-tools-overview written
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 07 Nov 2015 03:01:50 +0000 |
parents | 7c5b129573f6 |
children | 7d3f0910aeb2 |
rev | line source |
---|---|
896
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
1 How to play with FreeCalypso GSM firmware on a Pirelli DP-L10 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
2 ============================================================= |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
3 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
4 Our experimental FC GSM fw can now run on the Pirelli DP-L10 target. Our fw |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
5 cannot yet operate this phone in a useful manner, i.e., it is not currently |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
6 possible to replace Pirelli's proprietary fw with ours and use the phone as an |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
7 end user. Our gsm-fw is close to having working voice call functionality when |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
8 controlled by an external host via AT commands, but we haven't even started |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
9 working on the on-board user interface part yet. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
10 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
11 One very useful special feature of the Pirelli DP-L10 is its very large RAM: |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
12 8 MiB. Having such large RAM allows us to run our experimental fw on this |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
13 target entirely from RAM, without touching the flash. When you compile a |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
14 FreeCalypso gsm-fw image for the Pirelli target, by default a ramImage will be |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
15 built instead of a flashImage. It is possible to build a flashable image of |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
16 the fw in the same configuration and program it into flash with fc-loadtool, |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
17 but doing so is not recommended: our current fw has no battery management code, |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
18 so the charging hardware circuit will never be enabled and the battery will |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
19 discharge even with a USB power source connected; keeping Pirelli's original |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
20 fw in flash will allow the phone to charge its battery and otherwise function |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
21 normally when you are not in the middle of a FreeCalypso firmware experiment. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
22 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
23 If you are ready to play with our experimental GSM pseudo-modem fw on your |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
24 Pirelli, the steps are as follows: |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
25 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
26 1. Build the firmware in the pirelli-gsm configuration - see the Compiling |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
27 document for more details. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
28 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
29 2. Connect a USB cable from your GNU/Linux PC/laptop to the phone. If the |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
30 phone was off but the battery is present, it will go through a charger-plug |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
31 power-on event; if the flash contains Pirelli's original fw, it will boot in |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
32 the charging mode. If the battery is not present, the Calypso won't power |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
33 on (it needs VBAT and can't run on VCHG power instead), but the /dev/ttyUSBx |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
34 device will still show up, as the CP2102 USB-serial chip inside the phone is |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
35 powered strictly from the USB side. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
36 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
37 3. Run a command like the following: |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
38 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
39 fc-xram -h pirelli /dev/ttyUSB0 finlink/ramImage.srec rvinterf |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
40 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
41 Adjust the paths to your /dev/ttyUSBx device and your ramImage.srec as |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
42 appropriate, and add rvinterf logging or other options as desired. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
43 Specifying rvinterf on the fc-xram command line directs fc-xram to exec |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
44 rvinterf and pass the serial channel to it immediately as soon as the code |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
45 image has been loaded into target RAM and jumped to; this direct passing of |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
46 the serial channel from fc-xram to rvinterf is appropriate because the |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
47 loaded fw will immediately start emitting binary trace packets in TI's RVTMUX |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
48 format. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
49 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
50 4. Induce the phone to execute its Calypso boot path: if the battery was |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
51 removed, insert it now; if Pirelli's regular fw is running, execute its |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
52 power-off sequence. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
53 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
54 Once the Calypso chip in the Pirelli phone executes its boot path with fc-xram |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
55 running, the boot path will be diverted and our experimental firmware will be |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
56 loaded into target device RAM and jumped to. Our fw will now run, and the |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
57 rvinterf process on the host will maintain communication with it. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
58 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
59 To exercise our firmware further, you will need to open another terminal window |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
60 on your driving PC/laptop and run fc-shell. This program will connect to the |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
61 already running rvinterf process via a local socket, and it will enable you to |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
62 send various commands to the running fw on the target, the most important ones |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
63 being standard AT commands. Send the following sequence of AT commands to |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
64 bring up GSM functionality: |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
65 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
66 AT%SLEEP=2 -- disable deep sleep (doesn't work yet) |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
67 AT+CMEE=2 -- enable verbose error responses |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
68 AT+CFUN=1 -- enable radio and SIM interfaces |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
69 AT+COPS=0 -- register to the default GSM network |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
70 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
71 Our fw is currently able to exercise all SIM interface functions (at least the |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
72 obvious ones which I've tested), register with a live commercial GSM network |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
73 using a legitimate SIM, and send and receive SMS using standard GSM 07.05 AT |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
74 commands. Voice calls don't work yet; dialing a MO call with the ATD command |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
75 or placing a MT call to the device under test from the network side results in |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
76 the firmware going haywire. The latter misbehaviour is next to be investigated |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
77 and (hopefully) fixed. |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
78 |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
79 When you are done playing with our experimental fw, you can either yank the |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
80 battery and kill the host side rvinterf and fc-shell processes, or you can |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
81 issue a 'tgtreset' command at the fc-shell prompt. The latter will cause the |
7c5b129573f6
doc/Pirelli-Howto written
Space Falcon <falcon@ivan.Harhan.ORG>
parents:
diff
changeset
|
82 target to reset and boot back into its regular firmware. |