comparison gsm-fw/g23m-gsm/cc/cus_cc.h @ 673:2f7df7a314f8

gsm-fw/g23m-gsm subtree: initial import from LoCosto source
author Michael Spacefalcon <msokolov@ivan.Harhan.ORG>
date Sun, 28 Sep 2014 23:20:04 +0000
parents
children
comparison
equal deleted inserted replaced
672:0dc6f9e8e980 673:2f7df7a314f8
1 /*
2 +-----------------------------------------------------------------------------
3 | Project : GSM-PS (6147)
4 | Modul : CUS_CC
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : Custom dependent definitions for CC of the
18 | mobile station
19 |
20 | Use this header for definitions to integrate the
21 | protocol stack entity CC in your target system !
22 +-----------------------------------------------------------------------------
23 */
24
25 #ifndef CUS_CC_H
26 #define CUS_CC_H
27
28 /*==== CONSTANTS ==================================================*/
29 /*
30 * DTMF_BUF_SIZE
31 *
32 * Description : The constant defines the maximum of
33 * temporary stored DTMF digits -1 in CC.
34 */
35 #if defined (WIN32)
36 #define DTMF_BUF_SIZE 3
37 #else
38 #define DTMF_BUF_SIZE 20
39 #endif
40
41 /*
42 * MAX_SETUP_ATTEMPTS
43 *
44 * Number of setup attempts until upper layers are informed.
45 * This may be useful for networks which aren't very stable.
46 * All values other than 1 are regarded as dirty trick.
47 */
48 #ifdef WIN32 // Change this to suit your needs
49 #define MAX_SETUP_ATTEMPTS 2
50 #else
51 #define MAX_SETUP_ATTEMPTS 1
52 #endif
53
54 /*
55 * TIMER_VALUES
56 *
57 * Description : The constants define the timer values
58 * for the CC timers
59 */
60
61 /* unit for the timer values is 1 ms */
62 #define T303_VALUE 30000
63 #define T305_VALUE 30000
64 #define T308_VALUE 30000
65 #define T310_VALUE 30000
66 #define T313_VALUE 30000
67 #define T323_VALUE 30000
68 #define T332_VALUE 30000
69 #define T335_VALUE 30000
70 #define T336_VALUE 10000
71 #define T337_VALUE 10000
72
73 /*
74 * MAX_CC_CALLS
75 *
76 * Description : The constant define the number of parallel
77 * cc call instances per subscriber.
78 */
79
80 #if defined (WIN32)
81 #define MAX_CC_CALLS 4
82 #else
83 #define MAX_CC_CALLS 7
84 #endif
85
86 /*
87 * MAX_CC_TIMER
88 *
89 * Description : The constant define the number of timer
90 * available in the timer pool.
91 * Note : There are only two timer necessary for each CC instance,
92 * one for the supervision of the CC states and
93 * one for the supervision of DTMF (T336, T337).
94 */
95
96 #define MAX_CC_TIMER (MAX_CC_CALLS * 2)
97
98 /*
99 * FRAME_OFFSET_ZERO
100 *
101 * Description : If the constant is set, PL ensures that all frames
102 * are send with offset zero to DL. This enables a
103 * faster access on frame header parameter.
104 */
105
106 #undef FRAME_OFFSET_ZERO
107
108 /*
109 * MAX_ERROR_TAGS
110 *
111 * Description : The constant define the maximum number of
112 * stored information elements for the
113 * diagnostic field of the cc cause element.
114 */
115
116 #define MAX_ERROR_TAGS 5
117
118 /*
119 * MAX_STORED_PRIM
120 *
121 * Description : The constant define the maximum number of
122 * stored primiitives in call control.
123 */
124
125 #define MAX_STORED_PRIM 4
126
127 /*
128 * VERSION
129 *
130 * Description : The constants define the type and the value
131 * of a version identification. The version
132 * is part of the monitor struct.
133 */
134
135 #define T_VERSION char
136 #define VERSION_CC "CC 1.0"
137
138 /*
139 * VSI_CALLER
140 *
141 * Description : For multithread applications the constant VSI_CALLER
142 * must be defined to identify the calling thread of the
143 * VSI-Interface. This must be done correponding to the
144 * type of T_VSI_CALLER in VSI.H. The comma symbol is
145 * neccessary because the vsi-functions are called
146 * like this vsi_xxx (VSI_CALLER par2, par3 ...)
147 */
148
149 #ifdef OPTION_MULTITHREAD
150 #define VSI_CALLER cc_handle,
151 #define VSI_CALLER_SINGLE cc_handle
152 #else
153 #define VSI_CALLER
154 #define VSI_CALLER_SINGLE
155 #endif
156
157 #endif
158