FreeCalypso > hg > freecalypso-sw
comparison nuc-fw/bsp/armio.h @ 93:45911ad957fd
nuc-fw: beginning to integrate TI's BSP code
author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
---|---|
date | Sat, 31 Aug 2013 23:43:23 +0000 |
parents | |
children | 91460c8957f0 |
comparison
equal
deleted
inserted
replaced
92:f459043fae0c | 93:45911ad957fd |
---|---|
1 /* | |
2 * ARMIO.H * * Control diagnostic bits * * Reference : GCS207 * | |
3 * | |
4 * FreeCalypso note: this version of armio.h originates | |
5 * from the MV100-0.1.rar find. | |
6 */ | |
7 | |
8 #ifndef _ARM_IO_H_ | |
9 #define _ARM_IO_H_ | |
10 | |
11 #include "../include/sys_types.h" | |
12 | |
13 | |
14 // Duplicate address with ARMIO_IO_CNTL | |
15 // Need to investigate !!! | |
16 //#define ARMIO_CNTL (MEM_ARMIO + 0x04) /* I/O control */ | |
17 | |
18 #define ARMIO_IN (MEM_ARMIO + 0x00) /* inputs */ | |
19 #define ARMIO_OUT (MEM_ARMIO + 0x02) /* outputs */ | |
20 #define ARMIO_IO_CNTL (MEM_ARMIO + 0x04) /* I/O control */ | |
21 #define ARMIO_CNTL_REG (MEM_ARMIO + 0x06) /* control ARMIO */ | |
22 #define ARMIO_LOAD_TIM (MEM_ARMIO + 0x08) /* load TIM */ | |
23 #if (CHIPSET != 12) | |
24 #define ARMIO_KBR_IN (MEM_ARMIO + 0x0A) /* KBR inputs (rows) */ | |
25 #define ARMIO_KBR_OUT (MEM_ARMIO + 0x0C) /* KBR outputs (columns) */ | |
26 #endif | |
27 #define ARMIO_PWM_CNTL (MEM_ARMIO + 0x0E) /* LIGHT/BUZZER control */ | |
28 #define ARMIO_LIGHT (MEM_ARMIO + 0x10) /* light value */ | |
29 #define ARMIO_BUZZER (MEM_ARMIO + 0x12) /* buzzer value */ | |
30 #define ARMIO_CLOCKEN 0x0020 | |
31 #if (CHIPSET != 12) | |
32 #define CLKM_IO_CNTL MEM_IO_SEL /* control IO */ | |
33 #endif | |
34 | |
35 #if (CHIPSET == 12) | |
36 #define GPIO_INTERRUPT_LEVEL_REG * (volatile SYS_UWORD16 *) (MEM_ARMIO + 0x16) | |
37 #define GPIO_INTERRUPT_MASK_REG * (volatile SYS_UWORD16 *) (MEM_ARMIO + 0x18) | |
38 #else | |
39 #define ARMIO_GPIO_EVENT_MODE (MEM_ARMIO + 0x14) /* GPIO event mode */ | |
40 #define ARMIO_KBD_GPIO_INT (MEM_ARMIO + 0x16) /* Kbd/GPIO IRQ register */ | |
41 #define ARMIO_KBD_GPIO_MASKIT (MEM_ARMIO + 0x18) /* Kbd/GPIO mask IRQ */ | |
42 #endif | |
43 | |
44 | |
45 #if (CHIPSET != 12) | |
46 #define ARMIO_DCD (2) /* IO used for DCD on C-Sample - Output */ | |
47 #endif | |
48 #define ARMIO_DTR (3) /* IO used for DTR on C-Sample - Input */ | |
49 | |
50 #define ARMIO_FALLING_EDGE (0) | |
51 #define ARMIO_RISING_EDGE (1) | |
52 | |
53 #if (CHIPSET != 12) | |
54 #define ARMIO_KEYPDAD_INT (0x0001) | |
55 #define ARMIO_GPIO_INT (0x0002) | |
56 | |
57 #define ARMIO_MASKIT_KBD (0x0001) | |
58 #define ARMIO_MASKIT_GPIO (0x0002) | |
59 | |
60 void AI_EnableBit(int bit); | |
61 void AI_DisableBit(int bit); | |
62 #endif | |
63 void AI_SetBit(int bit); | |
64 void AI_ResetBit(int bit); | |
65 void AI_ConfigBitAsOutput(int bit); | |
66 void AI_ConfigBitAsInput(int bit); | |
67 SYS_BOOL AI_ReadBit(int bit); | |
68 void AI_SetSimIO3V(SYS_UWORD8 StdOutput); | |
69 void AI_Power(SYS_UWORD8 power); | |
70 void AI_ResetTspIO(void); | |
71 void AI_ResetDbgReg(void); | |
72 void AI_ResetIoConfig(void); | |
73 void AI_InitIOConfig(void); | |
74 void AI_ClockEnable (void); | |
75 | |
76 void AI_SelectIOForIT (SYS_UWORD16 Pin, SYS_UWORD16 Edge); | |
77 #if (CHIPSET != 12) | |
78 int AI_CheckITSource (SYS_UWORD16 Source); | |
79 #endif | |
80 void AI_UnmaskIT (SYS_UWORD16 Source); | |
81 void AI_MaskIT (SYS_UWORD16 Source); | |
82 | |
83 #if 0 | |
84 | |
85 /* | |
86 * The following stuff appears to be additions by whatever handset | |
87 * manufacturer was behind the MV100 code - not TI's reference code. | |
88 * It looks unclean, so let's try omitting it for FreeCalypso. | |
89 */ | |
90 | |
91 /* glowing, 2004-06-08 import from M188A, defined by Robert.Chen*/ | |
92 #define AI_CFGBIT_OUTPUT(bit) (*((volatile SYS_UWORD16 *) ARMIO_IO_CNTL) &= ~(1<<bit)) | |
93 #define AI_CFGBIT_INPUT(bit) (*((volatile SYS_UWORD16 *) ARMIO_IO_CNTL) |= (1<<bit)) | |
94 #define AI_SETBIT(bit) (*((volatile SYS_UWORD16 *) ARMIO_OUT) |= (1<<bit)) | |
95 #define AI_RESETBIT(bit) (*((volatile SYS_UWORD16 *) ARMIO_OUT) &= ~(1<<bit)) | |
96 | |
97 #define GPIO_LEDG 0 | |
98 #define GPIO_LEDB 1 | |
99 #define GPIO_HALL 2 | |
100 #define GPIO_HEADSET_DETECT 3 | |
101 | |
102 #define GPIO_MIDI_RESET 5 | |
103 | |
104 #define GPIO_LCD_RESET 7 | |
105 #define GPIO_LCD_DIMM2 8 | |
106 #define GPIO_MIDI_IRQ 9 | |
107 | |
108 #define GPIO_CAMERA_IRQ 11 | |
109 | |
110 #define GPIO_HEADSET_KEY 13 | |
111 | |
112 #endif /* the #if 0 above */ | |
113 | |
114 #endif /* file include guard */ |