FreeCalypso > hg > freecalypso-sw
comparison gsm-fw/L1/tm_cust0/l1tm_cust.h @ 519:57ad8f4d5cb5
L1: audio and tm header files imported from Leonardo semi-src
| author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
|---|---|
| date | Thu, 10 Jul 2014 15:02:48 +0000 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| 518:ffbb71ee664c | 519:57ad8f4d5cb5 |
|---|---|
| 1 /************* Revision Controle System Header ************* | |
| 2 * GSM Layer 1 software | |
| 3 * L1TM_CUST.H | |
| 4 * | |
| 5 * Filename l1tm_cust.h | |
| 6 * Copyright 2003 (C) Texas Instruments | |
| 7 * | |
| 8 ************* Revision Controle System Header *************/ | |
| 9 | |
| 10 | |
| 11 /*---------------------------------------------------------*/ | |
| 12 /* Initial settings for test mode config => Cust_tm_init() */ | |
| 13 /*---------------------------------------------------------*/ | |
| 14 | |
| 15 // Control algorithm settings: 0=>OFF, 1=>ON | |
| 16 #define AGC_ENABLE 1 | |
| 17 #define AFC_ENABLE 1 | |
| 18 | |
| 19 // ADC conversion setting: 0=>OFF, 1=>ON | |
| 20 #define ADC_ENABLE 1 | |
| 21 | |
| 22 // AGC settings | |
| 23 #define TM_AGC_VALUE 50 // AGC gain | |
| 24 #define TM_LNA_OFF 0 // 0=>LNA ON, 1=>LNA OFF | |
| 25 | |
| 26 // Power measurement settings | |
| 27 #define TM_NUM_MEAS 1 // number of measurements per TDMA | |
| 28 #define TM_WIN_MEAS 1 // position of measurement within TDMA | |
| 29 | |
| 30 // BEACON and TCH settings | |
| 31 #define TM_BCCH_ARFCN 80 // beacon | |
| 32 #define TM_TCH_ARFCN 62 // TCH arfcn | |
| 33 #define TM_MON_ARFCN 33 // monitor arfcn | |
| 34 #define TM_CHAN_TYPE TCH_F // channel type | |
| 35 #define TM_SUB_CHAN 0 // subchannel number | |
| 36 #define TM_SLOT_NUM 4 // TS number | |
| 37 #define TM_TSC 5 // Training Sequence | |
| 38 #define TM_TXPWR 15 // TXPWR setting | |
| 39 #define TM_TXPWR_SKIP 4 | |
| 40 #define TM_TA 0 // timing advance setting | |
| 41 #define TM_BURST_TYPE 0 // 0=>normal burst, 1=>RACH burst | |
| 42 #define TM_BURST_DATA 0 // as defined in TM100.doc: tx_param_write | |
| 43 #define TM_PM_ENABLE 1 // Enable power measurements in packet transfer mode | |
| 44 | |
| 45 // Statistics settings | |
| 46 #define TM_NUM_LOOPS 0 // number of times a task is executed, 0 means infinite loop | |
| 47 #define TM_AUTO_RESULT_LOOPS 0 // number of loops before stats result is returned, 0 means infinite | |
| 48 #define TM_AUTO_RESET_LOOPS 0 // number of loops before stats I/F is reset, 0 means infinite | |
| 49 #define TM_STAT_TYPE 1 // type of stats as defined in TM100.doc: stats_read | |
| 50 #define TM_STAT_BITMASK 0x6057 // stats bitmaks as defined in TM100.doc: stats_read | |
| 51 | |
| 52 #if L1_GPRS | |
| 53 // Settings for GPRS test mode: | |
| 54 #define TM_PDTCH_ARFCN 62 // PDTCH arfcn | |
| 55 #define TM_MULTISLOT_CLASS 1 // GPRS multi slot class | |
| 56 #define TM_STAT_GPRS_SLOTS 0x80 // Bit mask for RX stats from PDTCH | |
| 57 #define TM_RX_ALLOCATION 0x80 // RX slot allocation (bit7->TS0...bit0->TS7) | |
| 58 #define TM_RX_CODING_SCHEME 1 // RX coding scheme | |
| 59 #define TM_TX_ALLOCATION 0x80 // TX slot allocation (bit7->TS0...bit0->TS7) | |
| 60 #define TM_TX_CODING_SCHEME 2 // TX coding scheme | |
| 61 #define TM_TXPWR_GPRS 15 // GPRS txpwr level | |
| 62 #endif | |
| 63 | |
| 64 | |
| 65 | |
| 66 |