FreeCalypso > hg > freecalypso-sw

comparison gsm-fw/g23m-gsm/dl/dl.h @ 702:900be07de4e8

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
dl_com.c compiles
author Michael Spacefalcon <msokolov@ivan.Harhan.ORG>
date Fri, 03 Oct 2014 03:25:57 +0000
parents 2f7df7a314f8
children
comparison
equal deleted inserted replaced
701:615fb8847d3f 702:900be07de4e8
44 * the following defines have an impact on the behaviour of the layer 2 44 * the following defines have an impact on the behaviour of the layer 2
45 */ 45 */
46 /* 46 /*
47 * DL_TRACE_ENABLED 47 * DL_TRACE_ENABLED
48 * is set : Enables the trace feature (buffered or immediately trace) 48 * is set : Enables the trace feature (buffered or immediately trace)
49 * isīnt set: Disables the trace feature 49 * isn't set: Disables the trace feature
50 */ 50 */
51 #define DL_TRACE_ENABLED 51 #define DL_TRACE_ENABLED
52 52
53 /* 53 /*
54 * DL_IMMEDIATE_TRACE 54 * DL_IMMEDIATE_TRACE
55 * operates only with enabled trace feature! 55 * operates only with enabled trace feature!
56 * is set : Enables unbuffered trace. Write out the trace immediately without 56 * is set : Enables unbuffered trace. Write out the trace immediately without
57 * buffering (or rather delayed by signalling to itself while the MS 57 * buffering (or rather delayed by signalling to itself while the MS
58 * is in interrupt context state). 58 * is in interrupt context state).
59 * isīnt set: Enables buffered trace (write out in idle mode only) 59 * isn't set: Enables buffered trace (write out in idle mode only)
60 * Attention: Due to the interrupt context of the uplink and downlink trace 60 * Attention: Due to the interrupt context of the uplink and downlink trace
61 this feature requires very fast trace capability. The normal trace 61 * this feature requires very fast trace capability. The normal trace
62 transfer rate of 115200 Baud is not sufficient! 62 * transfer rate of 115200 Baud is not sufficient!
63 */ 63 */
64 #define DL_IMMEDIATE_TRACE 64 #define DL_IMMEDIATE_TRACE
65 65
66 /* 66 /*
67 * DISABLE_MEASREPORT_TRACE 67 * DISABLE_MEASREPORT_TRACE
68 * operates only with enabled buffered trace! 68 * operates only with enabled buffered trace!
69 * is set : Disables trace of measurement reports 69 * is set : Disables trace of measurement reports
70 * isīnt set: Normal trace of measurement reports 70 * isn't set: Normal trace of measurement reports
71 #define DISABLE_MEASREPORT_TRACE 71 #define DISABLE_MEASREPORT_TRACE
72 */ 72 */
73 /* 73 /*
74 * DISABLE_EMPTY_UI 74 * DISABLE_EMPTY_UI
75 * operates only with enabled buffered trace! 75 * operates only with enabled buffered trace!
76 * is set : Disables trace of empty frames 76 * is set : Disables trace of empty frames
77 * isīnt set: Normal trace of empty frames 77 * isn't set: Normal trace of empty frames
78 */ 78 */
79 #define DISABLE_EMPTY_UI 79 #define DISABLE_EMPTY_UI
80 80
81 /* 81 /*
82 * DELAYED_RELEASE_IND 82 * DELAYED_RELEASE_IND
85 * release indication to RR, RR stops the dedicated mode in layer 1). 85 * release indication to RR, RR stops the dedicated mode in layer 1).
86 * During the delay, DL sends only dummy frames for some uplink 86 * During the delay, DL sends only dummy frames for some uplink
87 * opportunities (see DL_FACCH_RELEASE_DELAY_VALUE and 87 * opportunities (see DL_FACCH_RELEASE_DELAY_VALUE and
88 * DL_SDCCH_RELEASE_DELAY_VALUE). The delay stops after the given 88 * DL_SDCCH_RELEASE_DELAY_VALUE). The delay stops after the given
89 * count of uplinked dummy frames or at a downlink on this channel. 89 * count of uplinked dummy frames or at a downlink on this channel.
90 * isīnt set: No delayed release indication 90 * isn't set: No delayed release indication
91 */ 91 */
92 #define DELAYED_RELEASE_IND 92 #define DELAYED_RELEASE_IND
93 93
94 #if defined(DELAYED_RELEASE_IND) 94 #if defined(DELAYED_RELEASE_IND)
95 /* 95 /*
106 * DELAYED_SABM 106 * DELAYED_SABM
107 * is set : To give layer 1 some time to switch the physical channel on FACCH 107 * is set : To give layer 1 some time to switch the physical channel on FACCH
108 * DL delays the transmit of the SABM frame. After (re-)establishment 108 * DL delays the transmit of the SABM frame. After (re-)establishment
109 * request from RR, DL sends only dummies (return NULL) for the first 109 * request from RR, DL sends only dummies (return NULL) for the first
110 * uplink opportunities (see DL_FACCH_SABM_DELAY_VALUE). 110 * uplink opportunities (see DL_FACCH_SABM_DELAY_VALUE).
111 * isīnt set: No delayed uplink of the SABM frame. 111 * isn't set: No delayed uplink of the SABM frame.
112 */ 112 */
113 #define DELAYED_SABM 113 #define DELAYED_SABM
114 114
115 #if defined(DELAYED_SABM) 115 #if defined(DELAYED_SABM)
116 #undef DELAYED_SABM 116 #undef DELAYED_SABM
129 /* 129 /*
130 * LATE_LEAVING_DEDICATED 130 * LATE_LEAVING_DEDICATED
131 * is set : The leaving of dedicated mode happens in latest moment, after 131 * is set : The leaving of dedicated mode happens in latest moment, after
132 * the reception of an UA frame after sent of DISC 132 * the reception of an UA frame after sent of DISC
133 * or before uplink of the UA frame after reception of a DISC frame. 133 * or before uplink of the UA frame after reception of a DISC frame.
134 * isīnt set: In this case the dedicated mode is leaving immediately after 134 * isn't set: In this case the dedicated mode is leaving immediately after
135 * the detection of a release (after the incoming L3 message 135 * the detection of a release (after the incoming L3 message
136 * CHANNEL RELEASE, or after reception of a DISC frame or before 136 * CHANNEL RELEASE, or after reception of a DISC frame or before
137 * the uplink of a DISC frame). 137 * the uplink of a DISC frame).
138 */ 138 */
139 #define LATE_LEAVING_DEDICATED 139 #define LATE_LEAVING_DEDICATED
140 140
141 /* 141 /*
142 * IFRAME_AS_RR 142 * IFRAME_AS_RR
143 * is set : I frame might response with I frame 143 * is set : I frame might response with I frame
144 * isīnt set: I frame must response with RR frame 144 * isn't set: I frame must response with RR frame
145 */ 145 */
146 #define IFRAME_AS_RR 146 #define IFRAME_AS_RR
147 147
148 /* 148 /*
149 * INVOKE_SIGNAL 149 * INVOKE_SIGNAL
150 * is set : DL does not send primitives or traces within L1 interrupt context 150 * is set : DL does not send primitives or traces within L1 interrupt context
151 * anymore. It sends signals instead. The primitives or traces are 151 * anymore. It sends signals instead. The primitives or traces are
152 * delayed until the entity will be in the own context. 152 * delayed until the entity will be in the own context.
153 * isīnt set: Primitves or traces are processed immediately even is DL within 153 * isn't set: Primitves or traces are processed immediately even is DL within
154 * in L1 interrupt context. 154 * in L1 interrupt context.
155 */ 155 */
156 #define INVOKE_SIGNAL 156 #define INVOKE_SIGNAL
157 157
158 /* 158 /*
572 #define FRAME_2_4_X 572 #define FRAME_2_4_X
573 #elif defined(PEI_H) /* frame version 2.3.x */ 573 #elif defined(PEI_H) /* frame version 2.3.x */
574 typedef USHORT T_SIGNAL_OPC; 574 typedef USHORT T_SIGNAL_OPC;
575 #define FRAME_2_3_X 575 #define FRAME_2_3_X
576 #else /* frame version unknown */ 576 #else /* frame version unknown */
577 #pragma error("unknown frame version, missing PEI_H or __PEI_H__") 577 #error "unknown frame version, missing PEI_H or __PEI_H__"
578 #endif /* frame version */ 578 #endif /* frame version */
579 579
580 580
581 /*==== TYPES ======================================================*/ 581 /*==== TYPES ======================================================*/
582 typedef struct 582 typedef struct
795 UBYTE sacch_mode; 795 UBYTE sacch_mode;
796 T_DL_DATA_IND * dcch0_in_msg; 796 T_DL_DATA_IND * dcch0_in_msg;
797 T_DL_DATA_IND * dcch3_in_msg; 797 T_DL_DATA_IND * dcch3_in_msg;
798 T_QUEUE dcch0_queue; 798 T_QUEUE dcch0_queue;
799 T_QUEUE dcch3_queue; 799 T_QUEUE dcch3_queue;
800 BOOL dcch0_unserved; /* storing of indication (unserved DL-DATA_REQīs) */ 800 BOOL dcch0_unserved; /* storing of indication (unserved DL-DATA_REQ's) */
801 BOOL dcch3_unserved; /* for use with DL-ESTABLISHMENT-CNF */ 801 BOOL dcch3_unserved; /* for use with DL-ESTABLISHMENT-CNF */
802 T_RADIO_FRAME l2_frame;/* Buffer for l2_frame and empty l2 frame */ 802 T_RADIO_FRAME l2_frame;/* Buffer for l2_frame and empty l2 frame */
803 BOOL RR_dedicated;/* Flag for RR dedictated mode 803 BOOL RR_dedicated;/* Flag for RR dedictated mode
804 * (necessary for measurement reports) */ 804 * (necessary for measurement reports) */
805 ULONG fn; /* last received frame number */ 805 ULONG fn; /* last received frame number */
1223 #endif /* DL_IMMEDIATE_TRACE */ 1223 #endif /* DL_IMMEDIATE_TRACE */
1224 #else 1224 #else
1225 #define DL_OFFLINE_TRACE(type, ch, ch_type, data) /* do nothing */ 1225 #define DL_OFFLINE_TRACE(type, ch, ch_type, data) /* do nothing */
1226 #endif /* DL_TRACE_ENABLED */ 1226 #endif /* DL_TRACE_ENABLED */
1227 1227
1228 #if !defined(_FILE10_) 1228 /*
1229 * FreeCalypso change: this __FILE10__ thing is gross, so let's try
1230 * removing it. We run gcc from the directory where the source is,
1231 * pathname=filename, so __FILE__ should be short enough.
1232 */
1233 #if 0 && !defined(_FILE10_)
1229 #define __FILE10__ (__FILE__+strlen(__FILE__)-11) 1234 #define __FILE10__ (__FILE__+strlen(__FILE__)-11)
1230 #endif /* !_FILE10_ */ 1235 #endif /* !_FILE10_ */
1231 1236
1232 #if defined(DL_TRACE_ENABLED) || defined(FF_EM_MODE) 1237 #if defined(DL_TRACE_ENABLED) || defined(FF_EM_MODE)
1233 EXTERN void com_semaphore_err (void); 1238 EXTERN void com_semaphore_err (void);
1241 #endif /* !DL_IMMEDIATE_TRACE */ 1246 #endif /* !DL_IMMEDIATE_TRACE */
1242 #endif /* DL_TRACE_ENABLED || FF_EM_MODE */ 1247 #endif /* DL_TRACE_ENABLED || FF_EM_MODE */
1243 1248
1244 1249
1245 #if defined (DL_TRACE_ENABLED) && defined(DL_TRACE_PFREE) 1250 #if defined (DL_TRACE_ENABLED) && defined(DL_TRACE_PFREE)
1246 #define MY_PFREE(p) p = my_pfree (p, __LINE__, __FILE10__) 1251 #define MY_PFREE(p) p = my_pfree (p, __LINE__, __FILE__)
1247 void* my_pfree(void *pointer, int line, char *file); 1252 void* my_pfree(void *pointer, int line, char *file);
1248 #else 1253 #else
1249 #define MY_PFREE(p) PFREE(p) 1254 #define MY_PFREE(p) PFREE(p)
1250 #endif /* DL_TRACE_ENABLED */ 1255 #endif /* DL_TRACE_ENABLED */
1251 1256
1272 #define TRACE_ARRAY(array, size, titel) 1277 #define TRACE_ARRAY(array, size, titel)
1273 #endif /* ARRAY_TRACE */ 1278 #endif /* ARRAY_TRACE */
1274 #endif /* 0 */ 1279 #endif /* 0 */
1275 1280
1276 #endif /* !__DL_H__ */ 1281 #endif /* !__DL_H__ */
1277
1278