FreeCalypso > hg > freecalypso-sw

comparison gsm-fw/g23m-aci/aci/ati_mm.c @ 775:eedbf248bac0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
gsm-fw/g23m-aci subtree: initial import from LoCosto source
author Michael Spacefalcon <msokolov@ivan.Harhan.ORG>
date Sun, 12 Oct 2014 01:45:14 +0000
parents
children 09382de17df9
comparison
equal deleted inserted replaced
774:40a721fd9854 775:eedbf248bac0
1 /*
2 +-----------------------------------------------------------------------------
3 | Project : GSM-F&D (8411)
4 | Modul : ATI
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : AT Command Interpreter: Mobility Management related functions.
18 +-----------------------------------------------------------------------------
19 */
20
21 #ifndef ATI_MM_C
22 #define ATI_MM_C
23
24 #undef DUMMY_ATI_STRINGS
25
26 #include "aci_all.h"
27
28 #include "aci_lst.h"
29 #include "aci_cmh.h"
30 #include "ati_cmd.h"
31 #include "aci_io.h"
32 #include "aci_cmd.h"
33 #include "l4_tim.h"
34
35 #include "aci_mem.h"
36 #include "aci_prs.h"
37
38 #include "ati_int.h"
39
40 #ifdef UART
41 #include "dti.h"
42 #include "dti_conn_mng.h"
43 #endif
44
45 #include "psa.h"
46 #include "cmh.h"
47 #include "psa_sim.h"
48 #include "cmh_sim.h"
49 #include "psa_mm.h"
50
51 #ifdef FF_ATI_BAT
52
53 #include "typedefs.h"
54 #include "gdd.h"
55 #include "bat.h"
56
57 #include "ati_bat.h"
58
59 #endif /* FF_ATI_BAT */
60
61 EXTERN T_ACI_CFUN_FUN CFUNfun;
62 EXTERN T_CIEV_SIGNAL_BUFFER asCievSignalBuf;
63 EXTERN T_CIEV_SMSFULL_BUFFER asCievSmsFullBuf;
64
65 /*
66 +--------------------------------------------------------------------+
67 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
68 | STATE : code ROUTINE : atPlusCops |
69 +--------------------------------------------------------------------+
70
71 PURPOSE : +COPS command (operator selection)
72 */
73
74 GLOBAL T_ATI_RSLT setatPlusCOPS (char *cl, UBYTE srcId)
75 {
76 CHAR op[MAX_ALPHA_OPER_LEN] = {0};
77 T_ACI_RETURN ret = AT_FAIL;
78 T_ACI_COPS_MOD mode = COPS_MOD_NotPresent;
79 T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
80 T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
81
82 TRACE_FUNCTION("setatPlusCops()");
83
84 if (CFUNfun NEQ CFUN_FUN_Full)
85 {
86 TRACE_EVENT_P1("+COPS error: cannot proceed Mobile has no Full CFUN: %d", CFUNfun);
87 cmdCmeError(CME_ERR_OpNotAllow);
88 return ATI_FAIL;
89 }
90
91 cl = parse (cl,"dds",&mode,&format,(LONG)(MAX_ALPHA_OPER_LEN-1),op); /*split parameter string in int,int,str*/
92 if (!cl OR ((mode EQ COPS_MOD_Man OR mode EQ COPS_MOD_Both)
93 AND op[0] EQ 0))
94 {
95 cmdCmeError(CME_ERR_OpNotAllow);
96 return ATI_FAIL;
97 }
98
99 #ifdef FF_ATI_BAT
100 {
101 T_BAT_cmd_send cmd;
102 T_BAT_cmd_set_plus_cops cops;
103 UBYTE len;
104
105 len=strlen(op);
106
107 /*
108 * If the operator name is too long we can't really do anything
109 * meaningful, so generate an error and give up.
110 */
111 if (len>BAT_MAX_COPS_OPER_LEN)
112 {
113 cmdCmeError(CME_ERR_Unknown);
114 return(ATI_FAIL);
115 }
116
117 cmd.ctrl_params = BAT_CMD_SET_PLUS_COPS;
118 cmd.params.ptr_set_plus_cops=&cops;
119
120 /*
121 * This relies on T_ACI_COPS_MOD and T_BAT_plus_cops_mode being
122 * equivalent.
123 */
124 cops.mode=(T_BAT_plus_cops_mode)mode;
125
126 /*
127 * This relies on T_ACI_COPS_FRMT and T_BAT_plus_cops_format being
128 * equivalent.
129 */
130 cops.format=(T_BAT_plus_cops_format)format;
131
132 cops.c_oper=(U8)len;
133
134 if (len)
135 {
136 memcpy(cops.oper,op,BAT_MAX_COPS_OPER_LEN);
137 cops.v_oper=TRUE;
138 }
139 else
140 {
141 cops.v_oper=FALSE;
142 }
143 bat_send(ati_bat_get_client(srcId), &cmd);
144 src_params->curAtCmd = AT_CMD_COPS;
145 return ATI_EXCT;
146 }
147 #else
148
149 ret = sAT_PlusCOPS ((T_ACI_CMD_SRC)srcId,mode,format,op);
150 switch (ret)
151 {
152 case (AT_CMPL): /*operation completed*/
153 break;
154 case (AT_EXCT):
155 src_params->curAtCmd = AT_CMD_COPS;
156 break;
157 default:
158 cmdCmeError(CME_ERR_Unknown); /*Command failed*/
159 break;
160 }
161 return (map_aci_2_ati_rslt(ret));
162
163 #endif /*FF_ATI_BAT*/
164 }
165
166 #ifdef FF_ATI_BAT
167 /*
168 +--------------------------------------------------------------------+
169 | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT |
170 | STATE : code ROUTINE : aci_bat_HandleTestCOPS |
171 +--------------------------------------------------------------------+
172
173 PURPOSE :
174 */
175 T_ATI_RSLT atiHandleTestCOPS(UBYTE srcId)
176 {
177 T_BAT_cmd_send cmd;
178 T_BAT_no_parameter dummy;
179
180 cmd.ctrl_params = BAT_CMD_TST_PERCENT_COPS;
181 dummy.bat_dummy = 0xFF;
182 cmd.params.ptr_que_plus_cops = &dummy;
183
184 TRACE_FUNCTION("aci_bat_HandleTestCOPS() calls bat_send() <=== as APPLICATION");
185
186 #ifndef FF_DUAL_SIM
187 if (CFUNfun NEQ CFUN_FUN_Full)
188 {
189 cmdCmeError(CME_ERR_OpNotAllow);
190 return ATI_FAIL;
191 }
192 #endif /*FF_DUAL_SIM*/
193
194 bat_send(ati_bat_get_client(srcId), &cmd);
195 return ATI_EXCT; /* executing, because response is passed by callback function */
196 }
197
198 #else /* no FF_ATI_BAT */
199
200 GLOBAL T_ATI_RSLT atiHandleTestCOPS(char *cl, UBYTE srcId)
201 {
202 T_ACI_RETURN ret = AT_FAIL;
203 SHORT startIdx = 0,
204 lastIdx = 0,
205 i;
206 T_ACI_COPS_LST operLst;
207 BOOL END_OF_LIST = FALSE;
208
209
210 T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
211 char* outputCommand;
212
213
214 TRACE_FUNCTION("atiHandleTestCOPS()");
215
216 #ifndef FF_DUAL_SIM
217 if (CFUNfun NEQ CFUN_FUN_Full)
218 {
219 cmdCmeError(CME_ERR_OpNotAllow);
220 return ATI_FAIL;
221 }
222 #endif /*FF_DUAL_SIM*/
223 do
224 {
225 startIdx += lastIdx;
226 switch (src_params->curAtCmd)
227 {
228 case AT_CMD_COPS:
229 ret = tAT_PlusCOPS((T_ACI_CMD_SRC)srcId,startIdx,&lastIdx,&operLst[0]);
230 break;
231 case AT_CMD_P_COPS:
232 ret = tAT_PercentCOPS((T_ACI_CMD_SRC)srcId,startIdx,&lastIdx,&operLst[0]);
233 break;
234 default:
235 cmdCmeError(CME_ERR_Unknown);
236 return ATI_FAIL;
237 }
238 if (ret EQ AT_CMPL)
239 {
240 for(i=0;i<lastIdx;i++)
241 {
242 if ((operLst[i].status < 0) AND (*operLst[i].numOper EQ 0))
243 {
244 END_OF_LIST = TRUE;
245 break;
246 }
247
248 /* What COPS command is active? */
249 switch (src_params->curAtCmd)
250 {
251 case AT_CMD_COPS:
252 outputCommand = "+COPS";
253 break;
254 case AT_CMD_P_COPS:
255 outputCommand ="%COPS";
256 break;
257 default:
258 cmdCmeError(CME_ERR_Unknown);
259 return ATI_FAIL;
260 }
261
262 sprintf(g_sa,"%s: %d,\"%s\",\"%s\",%s",outputCommand,
263 operLst[i].status,operLst[i].longOper,
264 operLst[i].shortOper,operLst[i].numOper);
265 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
266
267 }
268 }
269
270 switch(ret)
271 {
272 case AT_EXCT:
273 return ATI_EXCT;
274
275 case AT_FAIL:
276 cmdCmeError(CME_ERR_Unknown);
277 return ATI_FAIL;
278
279 case AT_BUSY:
280 return ATI_BUSY;
281
282 default:
283 break;/* Does nothing in this case */
284 }
285
286 }
287 while(!END_OF_LIST);
288
289 return ATI_CMPL;
290 }
291
292 #endif /* no FF_ATI_BAT */
293
294
295 GLOBAL T_ATI_RSLT tesatPlusCOPS (char *cl, UBYTE srcId)
296 {
297 T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
298
299 #ifdef FF_ATI_BAT
300 TRACE_FUNCTION("tesatPlusCOPS() calls bat_send() <=== as APPLICATION");
301 return atiHandleTestCOPS(srcId);
302
303 #else /* FF_ATI_BAT */
304 TRACE_FUNCTION("tesatPlusCOPS()");
305 return atiHandleTestCOPS(cl,srcId);
306 #endif /* FF_ATI_BAT */
307
308 }
309
310 GLOBAL T_ATI_RSLT queatPlusCOPS (char *cl, UBYTE srcId)
311 {
312 CHAR op[MAX_ALPHA_OPER_LEN] = {0};
313 T_ACI_RETURN ret = AT_FAIL;
314 T_ACI_COPS_MOD mode = COPS_MOD_NotPresent;
315 T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
316
317 TRACE_FUNCTION("queatPlusCops()");
318
319 #ifdef FF_ATI_BAT
320 {
321 T_BAT_cmd_send cmd;
322 T_BAT_no_parameter dummy;
323
324 cmd.ctrl_params = BAT_CMD_QUE_PLUS_COPS;
325 dummy.bat_dummy = 0xFF;
326 cmd.params.ptr_que_plus_cops = &dummy;
327 bat_send(ati_bat_get_client(srcId), &cmd);
328 return(ATI_EXCT);
329 }
330 #else /* no FF_ATI_BAT */
331
332 ret = qAT_PlusCOPS((T_ACI_CMD_SRC)srcId,&mode,&format,op);
333 if (ret EQ AT_CMPL)
334 {
335 if (*op)
336 sprintf(g_sa,"+COPS: %d,%d,\"%s\"",mode,format,op);
337 else
338 sprintf(g_sa,"+COPS: %d",mode);
339
340 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
341 }
342 else
343 {
344 cmdCmeError(CME_ERR_Unknown);
345 }
346 return (map_aci_2_ati_rslt(ret));
347
348 #endif /* no FF_ATI_BAT */
349 }
350
351 /*
352 +--------------------------------------------------------------------+
353 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
354 | STATE : code ROUTINE : setatPercentCOPS |
355 +--------------------------------------------------------------------+
356
357 PURPOSE : %COPS command (operator selection)
358 */
359
360 GLOBAL T_ATI_RSLT setatPercentCOPS (char *cl, UBYTE srcId)
361 {
362 CHAR op[MAX_ALPHA_OPER_LEN] = {0};
363 T_ACI_RETURN ret = AT_FAIL;
364 T_ACI_COPS_MOD mode = COPS_MOD_NotPresent;
365 T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
366 T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
367
368 if (CFUNfun NEQ CFUN_FUN_Full)
369 {
370 TRACE_EVENT_P1("%COPS error: cannot proceed Mobile has no Full CFUN: %d", CFUNfun);
371 cmdCmeError(CME_ERR_OpNotAllow);
372 return ATI_FAIL;
373 }
374 cl = parse (cl,"dds",&mode,&format,(LONG)(MAX_ALPHA_OPER_LEN-1),op); /*split parameter string in int,int,str*/
375 if (!cl) /*For %COPS, Manual selection without Operator parameter is allowed */
376 {
377 cmdCmeError(CME_ERR_OpNotAllow);
378 return ATI_FAIL;
379 }
380
381 #ifdef FF_ATI_BAT
382 {
383 T_BAT_cmd_send cmd;
384 T_BAT_cmd_set_percent_cops my_bat_set_percent_cops;
385 UBYTE OperLength = strlen(op);
386
387 TRACE_FUNCTION("setatPercentCOPS() calls bat_send() <=== as APPLICATION");
388
389 memset(&my_bat_set_percent_cops, sizeof(my_bat_set_percent_cops), FALSE);
390 cmd.ctrl_params = BAT_CMD_SET_PERCENT_COPS;
391 cmd.params.ptr_set_percent_cops = &my_bat_set_percent_cops;
392
393 my_bat_set_percent_cops.mode = (T_BAT_VAL_percent_cops_mode)mode;
394 my_bat_set_percent_cops.format = (T_BAT_VAL_percent_cops_format)format;
395
396 if (OperLength NEQ 0 AND
397 OperLength <= BAT_MAX_COPS_LONG_OPER_LEN)
398 {
399 memcpy(&my_bat_set_percent_cops.oper, op, BAT_MAX_COPS_LONG_OPER_LEN);
400 }
401
402 src_params->curAtCmd = AT_CMD_P_COPS;
403
404 bat_send(ati_bat_get_client(srcId), &cmd);
405 return ATI_EXCT; /* executing, because response is passed by callback function */
406 }
407
408 #else /* no FF_ATI_BAT */
409
410 TRACE_FUNCTION("setatPercentCOPS()");
411 ret = sAT_PercentCOPS ((T_ACI_CMD_SRC)srcId,mode,format,op);
412 switch (ret)
413 {
414 case (AT_CMPL): /*operation completed*/
415 break;
416 case (AT_EXCT):
417 src_params->curAtCmd = AT_CMD_P_COPS;
418 break;
419 default:
420 cmdCmeError(CME_ERR_Unknown); /*Command failed*/
421 break;
422 }
423 return (map_aci_2_ati_rslt(ret));
424
425 #endif /* no FF_ATI_BAT */
426 }
427
428
429 /*
430 +--------------------------------------------------------------------+
431 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
432 | STATE : code ROUTINE : tesatPercentCOPS |
433 +--------------------------------------------------------------------+
434
435 PURPOSE : %COPS command (operator test)
436 */
437
438
439 GLOBAL T_ATI_RSLT tesatPercentCOPS (char *cl, UBYTE srcId)
440 {
441 T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
442
443 #ifdef FF_ATI_BAT
444 TRACE_FUNCTION("tesatPercentCOPS() calls bat_send() <=== as APPLICATION");
445 return atiHandleTestCOPS(srcId);
446
447 #else /* FF_ATI_BAT */
448 TRACE_FUNCTION("tesatPercentCOPS()");
449 return atiHandleTestCOPS(cl,srcId);
450 #endif /* FF_ATI_BAT */
451 }
452
453 /*
454 +--------------------------------------------------------------------+
455 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
456 | STATE : code ROUTINE : queatPercentCOPS |
457 +--------------------------------------------------------------------+
458
459 PURPOSE : %COPS command (operator query)
460 */
461
462
463 GLOBAL T_ATI_RSLT queatPercentCOPS (char *cl, UBYTE srcId)
464 {
465 CHAR op[MAX_ALPHA_OPER_LEN] = {0};
466 T_ACI_RETURN ret = AT_FAIL;
467 T_ACI_COPS_MOD mode = COPS_MOD_NotPresent;
468 T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
469 T_ACI_COPS_SVST svrStatus = COPS_SVST_NotPresent;
470
471 #ifdef FF_ATI_BAT
472 {
473 T_BAT_cmd_send cmd;
474 T_BAT_no_parameter dummy;
475
476 TRACE_FUNCTION("queatPercentCOPS() calls bat_send() <=== as APPLICATION");
477 cmd.ctrl_params = BAT_CMD_QUE_PERCENT_COPS;
478 dummy.bat_dummy = 0xFF;
479 cmd.params.ptr_que_percent_cops = &dummy;
480 bat_send(ati_bat_get_client(srcId), &cmd);
481 return ATI_EXCT; /* executing, because response is passed by callback function */
482 }
483 #else /* no FF_ATI_BAT */
484
485 TRACE_FUNCTION("queatPercentCOPS()");
486
487 ret = qAT_PercentCOPS((T_ACI_CMD_SRC)srcId,&mode,&format,&svrStatus,op);
488 if (ret EQ AT_CMPL)
489 {
490 /* Added an empty comma and the service Status parameter */
491 sprintf(g_sa,"%s: %d,%d,\"%s\",,%d","%COPS",mode,format,op,svrStatus);
492 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
493
494 }
495 else
496 {
497 cmdCmeError(CME_ERR_Unknown); /*command failed*/
498 }
499 return (map_aci_2_ati_rslt(ret));
500
501 #endif /* no FF_ATI_BAT */
502 }
503
504
505
506 /*
507 +--------------------------------------------------------------------+
508 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
509 | STATE : code ROUTINE : setatPercentCREG |
510 +--------------------------------------------------------------------+
511
512 PURPOSE : %CREG command (Network registration)
513 */
514
515 GLOBAL T_ATI_RSLT setatPercentCREG (char *cl, UBYTE srcId)
516 {
517 T_ATI_CREG_MOD mode=CREG_MOD_OFF;
518
519 TRACE_FUNCTION("setatPercentCREG()");
520
521 cl=parse(cl,"d",&mode);
522
523 switch(mode)
524 {
525 case CREG_MOD_OFF:
526 case CREG_MOD_ON:
527 case CREG_MOD_LOC_INF_ON:
528 /* user wants to set mode: reset CREG related ATI parameters */
529 ati_creg_init(srcId, PercentCREG_CMD);
530 ati_user_output_cfg[srcId].percent_creg.mod_lac_cid.pres_mode = mode;
531 return ATI_CMPL;
532
533 default:
534 cmdCmeError(CME_ERR_OpNotAllow);
535 return ATI_FAIL;
536 }
537 }
538
539
540 /*
541 +--------------------------------------------------------------------+
542 | PROJECT : GPRS (8441) MODULE : GACI_CMD |
543 | STATE : code ROUTINE : queatPercentCREG |
544 +--------------------------------------------------------------------+
545
546 PURPOSE : %CREG command
547 */
548 GLOBAL T_ATI_RSLT queatPercentCREG (char *cl, UBYTE srcId)
549 {
550
551 #ifndef FF_ATI_BAT
552 T_ACI_CREG_STAT stat;
553 USHORT lac, cid;
554 T_ATI_CREG_MOD mode;
555 T_ACI_P_CREG_GPRS_IND gprs_ind;
556 short pos;
557 U8 rt;
558 #endif
559
560 TRACE_FUNCTION("queatPercentCREG()");
561
562 #ifdef FF_ATI_BAT
563 {
564 T_BAT_cmd_send cmd;
565 T_BAT_no_parameter dummy;
566
567 cmd.ctrl_params = BAT_CMD_QUE_PERCENT_CREG;
568 dummy.bat_dummy = 0xFF;
569 cmd.params.ptr_que_percent_creg = &dummy;
570 bat_send(ati_bat_get_client(srcId), &cmd);
571 return(ATI_EXCT);
572 }
573 #else /* no FF_ATI_BAT */
574
575 mode = ati_user_output_cfg[srcId].percent_creg.mod_lac_cid.pres_mode;
576
577 if (qAT_PercentCREG((T_ACI_CMD_SRC)srcId, &stat, &lac, &cid, &gprs_ind, &rt) NEQ AT_CMPL)
578 {
579 cmdCmeError(CME_ERR_Unknown);
580 return ATI_FAIL;
581 }
582
583 pos = sprintf(g_sa, "%s: %d,%d", "%CREG", mode, stat);
584
585 if ( (mode EQ CREG_MOD_LOC_INF_ON) AND
586 (stat EQ CREG_STAT_Reg OR stat EQ CREG_STAT_Roam) )
587 pos += sprintf(g_sa+pos, ",\"%04X\",\"%04X\"", lac, cid);
588 else
589 pos += sprintf(g_sa+pos, ",,");
590
591 sprintf(g_sa+pos,",%d", gprs_ind);
592
593 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
594 return ATI_CMPL;
595
596 #endif /* no FF_ATI_BAT */
597 }
598
599 /*
600 +--------------------------------------------------------------------+
601 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
602 | STATE : code ROUTINE : setatPlusCREG |
603 +--------------------------------------------------------------------+
604
605 PURPOSE : +CREG command (Network registration)
606 */
607
608 GLOBAL T_ATI_RSLT setatPlusCREG (char *cl, UBYTE srcId)
609 {
610 T_ATI_CREG_MOD mode=CREG_MOD_OFF;
611
612 TRACE_FUNCTION("setatPlusCREG()");
613
614 cl=parse(cl,"d",&mode);
615
616 switch(mode)
617 {
618 case CREG_MOD_OFF:
619 case CREG_MOD_ON:
620 case CREG_MOD_LOC_INF_ON:
621 /* user wants to set mode: reset CREG related ATI parameters */
622 ati_creg_init(srcId, CREG_CMD);
623 ati_user_output_cfg[srcId].creg.mod_lac_cid.pres_mode = mode;
624 return ATI_CMPL;
625
626 default:
627 cmdCmeError(CME_ERR_OpNotAllow);
628 return ATI_FAIL;
629 }
630 }
631
632 GLOBAL T_ATI_RSLT queatPlusCREG (char *cl, UBYTE srcId)
633 {
634 T_ACI_CREG_STAT stat;
635 USHORT lac, cid;
636 T_ATI_CREG_MOD mode;
637 short pos;
638
639 TRACE_FUNCTION("queatPlusCREG()");
640
641 mode = ati_user_output_cfg[srcId].creg.mod_lac_cid.pres_mode;
642
643 if (qAT_PlusCREG((T_ACI_CMD_SRC)srcId, &stat, &lac, &cid) NEQ AT_CMPL)
644 {
645 cmdCmeError(CME_ERR_Unknown);
646 return ATI_FAIL;
647 }
648
649 pos = sprintf(g_sa, "+CREG: %d,%d", mode, stat);
650
651 if (mode EQ CREG_MOD_LOC_INF_ON)
652 {
653 if (stat EQ CREG_STAT_Reg OR stat EQ CREG_STAT_Roam)
654 sprintf(g_sa+pos, ",\"%04X\",\"%04X\"", lac, cid);
655 }
656
657 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
658 return ATI_CMPL;
659 }
660
661
662
663
664 /*
665 +--------------------------------------------------------------------+
666 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
667 | STATE : code ROUTINE : atPlusCopn |
668 +--------------------------------------------------------------------+
669
670 PURPOSE : +COPN command (read operator names)
671 */
672
673 GLOBAL T_ATI_RSLT setatPlusCOPN (char *cl, UBYTE srcId)
674 {
675 SHORT startIdx, lastIdx;
676 T_ACI_COPN_LST operLst;
677 UBYTE idx;
678 BOOL loop;
679 BOOL ret;
680
681 TRACE_FUNCTION("setatPlusCOPN()");
682
683 /* read out the PCM list */
684 startIdx = 0;
685 loop = TRUE;
686
687 do
688 {
689 if ( qAT_PlusCOPN((T_ACI_CMD_SRC)srcId, COPN_LID_Pcm, startIdx,
690 &lastIdx, operLst) EQ AT_FAIL )
691 break;
692
693 for( idx=0; idx < MAX_OPER; idx++ )
694 {
695 if ( operLst[idx].numOper[0] EQ 0x0 )
696 {
697 loop = FALSE;
698 break;
699 }
700
701 sprintf(g_sa,"+COPN: \"%s\",\"%s\"",operLst[idx].numOper,
702 operLst[idx].alphaOper );
703 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
704 }
705 startIdx = lastIdx+1;
706 }
707 while( loop );
708
709 /* read out the constant list */
710 startIdx = 0;
711
712 ret = cmd_readCOPNBlock(startIdx,srcId);
713
714 if (ret EQ TRUE)
715 return ATI_CMPL;
716 else
717 return ATI_EXCT;
718
719 }
720
721 /*
722 +--------------------------------------------------------------------+
723 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
724 | STATE : code ROUTINE : setatPercentCOPN |
725 +--------------------------------------------------------------------+
726
727 PURPOSE : %COPN command (get MCC and MNC, long name or short name given one of the them)
728 */
729
730 GLOBAL T_ATI_RSLT setatPercentCOPN (char *cl, UBYTE srcId)
731 {
732 T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
733 CHAR op[MAX_ALPHA_OPER_LEN] = {0};
734 T_ACI_OPER_NTRY * oper_ntry;
735 USHORT i;
736
737 TRACE_FUNCTION ("setatPercentCOPN()");
738
739 cl = parse (cl,"ds", &format, (LONG)MAX_ALPHA_OPER_LEN, op);
740
741 if ((!cl) OR (format < COPS_FRMT_Long) OR (format > COPS_FRMT_Numeric) OR *op EQ '\0')
742 {
743 cmdCmeError(CME_ERR_OpNotAllow);
744 return ATI_FAIL;
745 }
746
747 if (format EQ COPS_FRMT_Numeric)
748 {
749 if ((strlen(op) NEQ (SIZE_MNC + SIZE_MCC -1)) AND
750 (strlen(op) NEQ (SIZE_MNC + SIZE_MCC)))
751 {
752 cmdCmeError(CME_ERR_OpNotAllow);
753 return ATI_FAIL;
754 }
755
756 for (i = 0; *(op+i) NEQ '\0'; i ++)
757 {
758 if (!((*(op+i) >= '0')AND(*(op+i) <= '9')))
759 {
760 cmdCmeError(CME_ERR_OpNotAllow);
761 return ATI_FAIL;
762 }
763 }
764 }
765
766 ACI_MALLOC (oper_ntry, sizeof (T_ACI_OPER_NTRY));
767
768 if (qAT_PercentCOPN( (T_ACI_CMD_SRC)srcId, format, op, oper_ntry) EQ AT_FAIL)
769 {
770 sprintf (g_sa, "%s", "%COPN: ");
771 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
772 ACI_MFREE (oper_ntry);
773 return ATI_CMPL;
774 }
775
776 if ((oper_ntry->mnc & 0x00F) EQ 0xF)
777 {
778 sprintf (g_sa, "%s\"%s\",\"%s\",\"%03X%02X\",%d", "%COPN: ", oper_ntry->longName, oper_ntry->shrtName,
779 oper_ntry->mcc, oper_ntry->mnc >> 4, oper_ntry->source);
780 }
781 else
782 {
783 sprintf (g_sa, "%s\"%s\",\"%s\",\"%03X%03X\",%d", "%COPN: ", oper_ntry->longName, oper_ntry->shrtName,
784 oper_ntry->mcc, oper_ntry->mnc, oper_ntry->source);
785 }
786 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
787
788 ACI_MFREE (oper_ntry);
789 return ATI_CMPL;
790
791
792 }
793
794 #ifdef TI_PS_FF_AT_CMD_WS46
795 /*
796 +--------------------------------------------------------------------+
797 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
798 | STATE : code ROUTINE : atPlusWS46 |
799 +--------------------------------------------------------------------+
800
801 PURPOSE : +WS46 command (select wireless network)
802 */
803
804 GLOBAL T_ATI_RSLT setatPlusWS46 (char *cl, UBYTE srcId)
805 {
806 T_ACI_RETURN ret = AT_FAIL;
807 T_ACI_WS46_MOD mode=WS46_MOD_NotPresent;
808
809 TRACE_FUNCTION("setatPLusWS46()");
810
811 cl = parse(cl,"d",&mode);
812 if (!cl)
813 {
814 cmdCmeError(CME_ERR_OpNotAllow);
815 return ATI_FAIL;
816 }
817
818 #ifdef FF_ATI_BAT
819
820 {
821 T_BAT_cmd_send cmd;
822 T_BAT_cmd_set_plus_ws46 ws46;
823
824 cmd.ctrl_params = BAT_CMD_SET_PLUS_WS46;
825 cmd.params.ptr_set_plus_ws46=&ws46;
826
827 ws46.n=(T_BAT_plus_ws46_n)mode;
828
829 bat_send(ati_bat_get_client(srcId), &cmd);
830 return(ATI_EXCT);
831 }
832
833 #else /* no FF_ATI_BAT */
834
835 ret=sAT_PlusWS46((T_ACI_CMD_SRC)srcId,mode);
836
837 if (ret EQ AT_CMPL)
838 {
839 return ATI_CMPL;
840 }
841 else
842 {
843 cmdCmeError(CME_ERR_OpNotAllow);
844 return ATI_FAIL;
845 }
846
847 #endif /* no FF_ATI_BAT */
848 }
849
850 GLOBAL T_ATI_RSLT queatPlusWS46 (char *cl, UBYTE srcId)
851 {
852 T_ACI_RETURN ret = AT_FAIL;
853 T_ACI_WS46_MOD mode=WS46_MOD_NotPresent;
854
855 TRACE_FUNCTION("queatPLusWS46()");
856
857 #ifdef FF_ATI_BAT
858 {
859 T_BAT_cmd_send cmd;
860 T_BAT_no_parameter dummy;
861
862 cmd.ctrl_params = BAT_CMD_QUE_PLUS_WS46;
863 dummy.bat_dummy = 0xFF;
864 cmd.params.ptr_que_plus_ws46 = &dummy;
865 bat_send(ati_bat_get_client(srcId), &cmd);
866 return(ATI_EXCT);
867 }
868 #else /* no FF_ATI_BAT */
869
870 ret = qAT_PlusWS46((T_ACI_CMD_SRC)srcId,&mode);
871
872 if (ret EQ AT_CMPL)
873 {
874 resp_disp(srcId, cl,"e",&mode);
875 return ATI_CMPL;
876 }
877 else if (ret EQ AT_FAIL)
878 {
879 cmdCmeError(CME_ERR_OpNotAllow);
880 return ATI_FAIL;
881 }
882 return (map_aci_2_ati_rslt(ret));
883
884 #endif /* no FF_ATI_BAT */
885 }
886 #endif /* TI_PS_FF_WS46 */
887 /*
888 +--------------------------------------------------------------------+
889 | PROJECT : GSM-F&D (8411) MODULE : |
890 | STATE : code ROUTINE : setatPercentCHPL |
891 +--------------------------------------------------------------------+
892
893 PURPOSE : show list of all available entries in the SIM field EF_HPLMNwAcT.
894
895 Command Possible Response
896 %CHPL=oprFrmt %CHPL: <opr>
897 %CHPL=? %CHPL: (list of supported <oprFrmt>s)
898
899 <oprFrmt>:
900 0 long format alphanumeric <opr>
901 1 short format alphanumeric <opr>
902 2 numeric <opr>
903
904 <opr>: string type; <oprFrmt> indicates if the format is
905 alphanumeric or numeric.
906 Long alphanumeric can be up to 16 characters.
907 Short alphanumeric can be up to 8 characters.
908 Numeric format is the GSM LAI number, which consists of:
909 3 BCD country code.
910 2 BCD network code.
911 The returned <opr> string shall not be in BCD format, but
912 in IRA characters converted from BCD. Hence the number
913 will have the structure (CC digit 3)(CC digit 2)(CC digit 1)
914 (NW digit 2)(NW digit 1).
915
916 */
917
918 GLOBAL T_ATI_RSLT setatPercentCHPL( char *cl, UBYTE srcId )
919 {
920 T_ACI_CHPL_FRMT format = CHPL_FRMT_NotPresent;
921
922 #ifndef FF_ATI_BAT
923 T_ACI_OPER_NTRY oper;
924 #endif
925
926 T_ACI_RETURN ret = AT_FAIL;
927
928 TRACE_FUNCTION( "setatPercentCHPL()" );
929
930 if (CFUNfun NEQ CFUN_FUN_Full)
931 {
932 TRACE_EVENT_P1("+COPS error: cannot proceed Mobile has no Full CFUN: %d", CFUNfun);
933 cmdCmeError(CME_ERR_OpNotAllow);
934 return ATI_FAIL;
935 }
936
937 /* parse mode */
938 cl = parse (cl, "d", &format);
939 if ((!cl) OR (format > CHPL_FRMT_Numeric) OR (format < CHPL_FRMT_NotPresent))
940 {
941 cmdCmeError (CME_ERR_OpNotAllow);
942 return (ATI_FAIL);
943 }
944
945 #ifdef FF_ATI_BAT
946
947 {
948 T_BAT_cmd_send cmd;
949 T_BAT_cmd_set_percent_chpl chpl;
950
951 cmd.ctrl_params = BAT_CMD_SET_PERCENT_CHPL;
952 cmd.params.ptr_set_percent_chpl=&chpl;
953
954 /*
955 * This relies on T_ACI_CHPL_FRMT and T_BAT_percent_chpl_oprfrmt being
956 * identical.
957 */
958 chpl.oprfrmt=(T_BAT_percent_chpl_oprfrmt)format;
959
960 bat_send(ati_bat_get_client(srcId), &cmd);
961 return(ATI_EXCT);
962 }
963
964 #else /* no FF_ATI_BAT */
965
966 ret = sAT_PercentCHPL ((T_ACI_CMD_SRC)srcId, &oper);
967 if (ret NEQ AT_CMPL)
968 {
969 cmdCmeError(CME_ERR_Unknown);
970 return (ATI_FAIL);
971 }
972
973 switch (format)
974 {
975 case CHPL_FRMT_Long :
976 sprintf(g_sa, "%s: %s", "%CHPL", oper.longName);
977 break;
978
979 case CHPL_FRMT_Short :
980 sprintf(g_sa, "%s: %s", "%CHPL", oper.shrtName);
981 break;
982
983 case CHPL_FRMT_Numeric :
984 if ((oper.mnc & 0x00F) EQ 0xF)
985 /*lint -e{702} */
986 sprintf(g_sa, "%s: %03x,%02x", "%CHPL", oper.mcc, oper.mnc >> 4);
987 else
988 sprintf(g_sa, "%s: %03x,%03x", "%CHPL", oper.mcc, oper.mnc);
989 break;
990
991 default :
992 cmdCmeError(CME_ERR_Unknown);
993 return (ATI_FAIL);
994 }
995 io_sendMessage (srcId, g_sa, ATI_NORMAL_OUTPUT);
996
997 return(ATI_CMPL);
998
999 #endif /* no FF_ATI_BAT */
1000 }
1001
1002 /*
1003 +--------------------------------------------------------------------+
1004 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1005 | STATE : code ROUTINE : setatPlusCTZR |
1006 +--------------------------------------------------------------------+
1007
1008 PURPOSE : %CTZR command (Timezone Mode)
1009 */
1010 GLOBAL T_ATI_RSLT setatPlusCTZR (char *cl, UBYTE srcId)
1011 {
1012 T_ACI_CTZR_MODE mode = CTZR_MODE_OFF; /* CTZR */
1013 T_ACI_RETURN ret = AT_FAIL;
1014
1015 TRACE_FUNCTION( "setatPlusCTZR()" );
1016
1017 /* parse mode */
1018 cl = parse (cl, "d", &mode);
1019 if ((!cl) OR (mode > CTZR_MODE_ON) OR (mode < CTZR_MODE_OFF))/*lint !e685 (Warning -- 685: Relational operator '>' always evaluates to 'false ) */
1020 {
1021 cmdCmeError (CME_ERR_OpNotAllow);
1022 return (ATI_FAIL);
1023 }
1024
1025 ret = sAT_PlusCTZR ((T_ACI_CMD_SRC)srcId, mode);
1026
1027 switch (ret)
1028 {
1029 case (AT_CMPL): /*operation completed*/
1030 break;
1031
1032 default:
1033 cmdCmeError(CME_ERR_Unknown); /*Command failed*/
1034 break;
1035 }
1036 return (map_aci_2_ati_rslt(ret));
1037
1038 }
1039
1040 /*
1041 +--------------------------------------------------------------------+
1042 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1043 | STATE : code ROUTINE : queatPlusCTZR |
1044 +--------------------------------------------------------------------+
1045
1046 PURPOSE : %CTZR command (Timezone Mode)
1047 */
1048 GLOBAL T_ATI_RSLT queatPlusCTZR (char *cl, UBYTE srcId)
1049 {
1050 T_ACI_CTZR_MODE mode;
1051 T_ACI_RETURN ret = AT_FAIL;
1052
1053 TRACE_FUNCTION("queatPlusCTZR()");
1054
1055 ret = qAT_PlusCTZR((T_ACI_CMD_SRC)srcId, &mode);
1056 if (ret NEQ AT_CMPL)
1057 {
1058 cmdCmeError(CME_ERR_Unknown);
1059 return (ATI_FAIL);
1060 }
1061
1062 sprintf(g_sa,"+CTZR: %d", mode);
1063 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
1064
1065 return ATI_CMPL;
1066 }
1067
1068 /*
1069 +--------------------------------------------------------------------+
1070 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1071 | STATE : code ROUTINE : setatPlusCTZU |
1072 +--------------------------------------------------------------------+
1073
1074 PURPOSE : +CTZU command (Timezone Update)
1075 */
1076 GLOBAL T_ATI_RSLT setatPlusCTZU (char *cl, UBYTE srcId)
1077 {
1078 T_ACI_CTZU_MODE mode = CTZU_MODE_OFF; /* CTZU */
1079 T_ACI_RETURN ret = AT_FAIL;
1080
1081 TRACE_FUNCTION( "setatPlusCTZU()" );
1082
1083 /* parse mode */
1084 cl = parse (cl, "d", &mode);
1085 if ((!cl) OR (mode > CTZU_MODE_ON) OR (mode < CTZU_MODE_OFF))/*lint !e685 (Warning -- 685: Relational operator '>' always evaluates to 'false ) */
1086 {
1087 cmdCmeError (CME_ERR_OpNotAllow);
1088 return (ATI_FAIL);
1089 }
1090
1091 #ifdef FF_ATI_BAT
1092
1093 {
1094 T_BAT_cmd_send cmd;
1095 T_BAT_cmd_set_plus_ctzu ctzu;
1096
1097 cmd.ctrl_params = BAT_CMD_SET_PLUS_CTZU;
1098 cmd.params.ptr_set_plus_ctzu=&ctzu;
1099
1100 /*
1101 * This relies on T_ACI_CTZU_MODE and T_BAT_plus_ctzu_onoff being
1102 * identical.
1103 */
1104 ctzu.onoff=(T_BAT_plus_ctzu_onoff)mode;
1105
1106 bat_send(ati_bat_get_client(srcId), &cmd);
1107 return(ATI_EXCT);
1108 }
1109
1110 #else /* no FF_ATI_BAT */
1111
1112 ret = sAT_PlusCTZU ((T_ACI_CMD_SRC)srcId, mode);
1113
1114 switch (ret)
1115 {
1116 case (AT_CMPL): /*operation completed*/
1117 break;
1118
1119 default:
1120 cmdCmeError(CME_ERR_Unknown); /*Command failed*/
1121 break;
1122 }
1123 return (map_aci_2_ati_rslt(ret));
1124
1125 #endif /* no FF_ATI_BAT */
1126 }
1127
1128
1129 /*
1130 +--------------------------------------------------------------------+
1131 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1132 | STATE : code ROUTINE : setatPercentCTZV |
1133 +--------------------------------------------------------------------+
1134
1135 PURPOSE : %CTZV command (time and date report)
1136 */
1137 GLOBAL T_ATI_RSLT setatPercentCTZV (char *cl, UBYTE srcId)
1138 {
1139 T_ACI_PCTZV_MODE mode = PCTZV_MODE_OFF; /* %CTZV */
1140 T_ACI_RETURN ret = AT_FAIL;
1141
1142 TRACE_FUNCTION( "setatPercentCTZV()" );
1143
1144 /* parse mode */
1145 cl = parse (cl, "d", &mode);
1146 if ((!cl) OR (mode > PCTZV_MODE_ON) OR (mode < PCTZV_MODE_OFF))/*lint !e685 (Warning -- 685: Relational operator '>' always evaluates to 'false ) */
1147 {
1148 cmdCmeError (CME_ERR_OpNotAllow);
1149 return (ATI_FAIL);
1150 }
1151
1152 ret = sAT_PercentCTZV ((T_ACI_CMD_SRC)srcId, mode);
1153
1154 switch (ret)
1155 {
1156 case (AT_CMPL): /*operation completed*/
1157 break;
1158
1159 default:
1160 cmdCmeError(CME_ERR_Unknown); /*Command failed*/
1161 break;
1162 }
1163 return (map_aci_2_ati_rslt(ret));
1164
1165 }
1166
1167
1168
1169 /*
1170 +--------------------------------------------------------------------+
1171 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1172 | STATE : code ROUTINE : setatPercentCNIV |
1173 +--------------------------------------------------------------------+
1174
1175 PURPOSE : %CNIV command (network identity report)
1176 */
1177 GLOBAL T_ATI_RSLT setatPercentCNIV (char *cl, UBYTE srcId)
1178 {
1179 T_ACI_CNIV_MODE mode = CNIV_MODE_OFF; /* CNIV */
1180 T_ACI_RETURN ret = AT_FAIL;
1181
1182 TRACE_FUNCTION( "setatPercentCNIV()" );
1183
1184 /* parse mode */
1185 cl = parse (cl, "d", &mode);
1186 if ((!cl) OR (mode > CNIV_MODE_ON) OR (mode < CNIV_MODE_OFF))/*lint !e685 (Warning -- 685: Relational operator '>' always evaluates to 'false ) */
1187 {
1188 cmdCmeError (CME_ERR_OpNotAllow);
1189 return (ATI_FAIL);
1190 }
1191
1192 #ifdef FF_ATI_BAT
1193 {
1194 T_BAT_cmd_send cmd;
1195 T_BAT_cmd_set_percent_cniv my_bat_set_percent_cniv;
1196
1197 memset(&my_bat_set_percent_cniv, 0 , sizeof(my_bat_set_percent_cniv));
1198 cmd.ctrl_params = BAT_CMD_SET_PERCENT_CNIV;
1199 cmd.params.ptr_set_percent_cniv = &my_bat_set_percent_cniv;
1200
1201 my_bat_set_percent_cniv.mode= (T_BAT_VAL_percent_cniv_mode)mode;
1202
1203 bat_send(ati_bat_get_client(srcId), &cmd);
1204 return ATI_EXCT; /* executing, because response is passed by callback function */
1205 }
1206 #else
1207 {
1208 ret = sAT_PercentCNIV ((T_ACI_CMD_SRC)srcId, mode);
1209
1210 switch (ret)
1211 {
1212 case (AT_CMPL): /*operation completed*/
1213 break;
1214
1215 default:
1216 cmdCmeError(CME_ERR_Unknown); /*Command failed*/
1217 break;
1218 }
1219 return (map_aci_2_ati_rslt(ret));
1220 }
1221 #endif /* FF_ATI_BAT */
1222 }
1223
1224 /*
1225 +--------------------------------------------------------------------+
1226 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1227 | STATE : code ROUTINE : queatPlusCTZU |
1228 +--------------------------------------------------------------------+
1229
1230 PURPOSE : +CTZU query command (Timezone update)
1231 */
1232 GLOBAL T_ATI_RSLT queatPlusCTZU (char *cl, UBYTE srcId)
1233 {
1234 #ifndef FF_ATI_BAT
1235 T_ACI_CTZU_MODE mode;
1236 T_ACI_RETURN ret = AT_FAIL;
1237 #endif
1238
1239 TRACE_FUNCTION("queatPlusCTZU()");
1240
1241 #ifdef FF_ATI_BAT
1242 {
1243 T_BAT_cmd_send cmd;
1244 T_BAT_no_parameter dummy;
1245
1246 cmd.ctrl_params = BAT_CMD_QUE_PLUS_CTZU;
1247 dummy.bat_dummy = 0xFF;
1248 cmd.params.ptr_que_plus_ctzu = &dummy;
1249 bat_send(ati_bat_get_client(srcId), &cmd);
1250 return(ATI_EXCT);
1251 }
1252 #else /* no FF_ATI_BAT */
1253
1254 ret = qAT_PlusCTZU((T_ACI_CMD_SRC)srcId, &mode);
1255 if (ret NEQ AT_CMPL)
1256 {
1257 cmdCmeError(CME_ERR_Unknown);
1258 return (ATI_FAIL);
1259 }
1260
1261 sprintf(g_sa,"+CTZU: %d", mode);
1262 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
1263
1264 return ATI_CMPL;
1265
1266 #endif /* no FF_ATI_BAT */
1267 }
1268
1269
1270
1271 /*
1272 +--------------------------------------------------------------------+
1273 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1274 | STATE : code ROUTINE : queatPercentCTZV |
1275 +--------------------------------------------------------------------+
1276
1277 PURPOSE : %CTZV command (time and date report)
1278 */
1279 GLOBAL T_ATI_RSLT queatPercentCTZV (char *cl, UBYTE srcId)
1280 {
1281 T_ACI_PCTZV_MODE mode;
1282 T_ACI_RETURN ret = AT_FAIL;
1283
1284 TRACE_FUNCTION("queatPercentCTZV()");
1285
1286 ret = qAT_PercentCTZV((T_ACI_CMD_SRC)srcId, &mode);
1287 if (ret NEQ AT_CMPL)
1288 {
1289 cmdCmeError(CME_ERR_Unknown);
1290 return (ATI_FAIL);
1291 }
1292
1293 sprintf(g_sa,"%s: %d","%CTZV", mode);
1294 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
1295
1296 return ATI_CMPL;
1297 }
1298
1299
1300 /*
1301 +--------------------------------------------------------------------+
1302 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1303 | STATE : code ROUTINE : queatPercentCNIV |
1304 +--------------------------------------------------------------------+
1305
1306 PURPOSE : %CNIV command (time and date report)
1307 */
1308 GLOBAL T_ATI_RSLT queatPercentCNIV (char *cl, UBYTE srcId)
1309 {
1310
1311 TRACE_FUNCTION("queatPercentCNIV()");
1312
1313 #ifdef FF_ATI_BAT
1314 {
1315 T_BAT_cmd_send cmd;
1316 T_BAT_no_parameter dummy;
1317
1318 cmd.ctrl_params = BAT_CMD_QUE_PERCENT_CNIV;
1319 dummy.bat_dummy = 0xFF;
1320 cmd.params.ptr_que_percent_cniv= &dummy;
1321
1322 bat_send(ati_bat_get_client(srcId), &cmd);
1323
1324 return(ATI_EXCT);
1325 }
1326 #else
1327 {
1328 T_ACI_CNIV_MODE mode;
1329 T_ACI_RETURN ret = AT_FAIL;
1330
1331 ret = qAT_PercentCNIV((T_ACI_CMD_SRC)srcId, &mode);
1332 if (ret NEQ AT_CMPL)
1333 {
1334 cmdCmeError(CME_ERR_Unknown);
1335 return (ATI_FAIL);
1336 }
1337 sprintf(g_sa,"%s: %d","%CNIV", mode);
1338 io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);
1339
1340 return ATI_CMPL;
1341 }
1342 #endif /*FF_ATI_BAT*/
1343 }
1344
1345 /*
1346 +--------------------------------------------------------------------+
1347 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1348 | STATE : code ROUTINE : setatPercentTREG |
1349 +--------------------------------------------------------------------+
1350
1351 PURPOSE : %CWUP command (force power campaign)
1352 */
1353
1354 GLOBAL T_ATI_RSLT setatPercentCWUP (char *cl, UBYTE srcId)
1355 {
1356 T_ACI_RETURN ret = AT_FAIL;
1357 T_ACI_CWUP_TYPE type;
1358
1359 TRACE_FUNCTION( "setatPercentCWUP()" );
1360
1361 /* parse mode */
1362 cl = parse (cl, "d", &type);
1363 if ((!cl) OR (type NEQ CWUP_TYPE_RR))
1364 {
1365 cmdCmeError (CME_ERR_OpNotAllow);
1366 return (ATI_FAIL);
1367 }
1368
1369 #ifdef FF_ATI_BAT
1370
1371 {
1372 T_BAT_cmd_send cmd;
1373 T_BAT_cmd_set_percent_cwup cwup;
1374
1375 cmd.ctrl_params = BAT_CMD_SET_PERCENT_CWUP;
1376 cmd.params.ptr_set_percent_cwup=&cwup;
1377
1378 /*
1379 * This relies on T_ACI_CWUP_TYPE and T_BAT_percent_cwup_type being
1380 * identical.
1381 */
1382 cwup.type=(T_BAT_percent_cwup_type)type;
1383
1384 bat_send(ati_bat_get_client(srcId), &cmd);
1385 return(ATI_EXCT);
1386 }
1387
1388 #else /* no FF_ATI_BAT */
1389
1390 ret = sAT_PercentCWUP ((T_ACI_CMD_SRC)srcId, type);
1391
1392 switch (ret)
1393 {
1394 case (AT_CMPL): /*operation completed*/
1395 break;
1396
1397 default:
1398 cmdCmeError(CME_ERR_Unknown); /*Command failed*/
1399 break;
1400 }
1401 return (map_aci_2_ati_rslt(ret));
1402
1403 #endif /* no FF_ATI_BAT */
1404 }
1405
1406 /*
1407 +--------------------------------------------------------------------+
1408 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1409 | STATE : code ROUTINE : atPlusCIND |
1410 +--------------------------------------------------------------------+
1411
1412 PURPOSE : +CIND command
1413 (configures the signal strength and SMS full indication)
1414 */
1415 GLOBAL T_ATI_RSLT setatPlusCIND (char *cl, UBYTE srcId)
1416 {
1417 T_ACI_RETURN tRet = AT_FAIL;
1418 T_ACI_MM_CIND_VAL_TYPE sCindSettings;
1419
1420 TRACE_FUNCTION("setatPLusCIND()");
1421
1422 if (!cl)
1423 {
1424 cmdCmeError(CME_ERR_OpNotAllow);
1425 return ATI_FAIL;
1426 }
1427
1428 sCindSettings.sCindSignalParam = CIND_SIGNAL_INDICATOR_LVL0;
1429 sCindSettings.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_MEMAVAIL;
1430
1431 cl = parse(cl,"dd", &sCindSettings.sCindSignalParam,
1432 &sCindSettings.sCindSmsFullParam);
1433
1434 if ((sCindSettings.sCindSignalParam < CIND_SIGNAL_INDICATOR_LVL0 OR
1435 sCindSettings.sCindSignalParam > CIND_SIGNAL_INDICATOR_LVL5) OR
1436 (sCindSettings.sCindSmsFullParam < CIND_SMSFULL_INDICATOR_MEMAVAIL OR
1437 sCindSettings.sCindSmsFullParam > CIND_SMSFULL_INDICATOR_MEMFULL))
1438 {
1439 cmdCmeError(CME_ERR_OpNotAllow);
1440 return ATI_FAIL;
1441 }
1442
1443 #ifdef FF_ATI_BAT
1444 {
1445 T_BAT_cmd_send cmd;
1446 T_BAT_cmd_set_plus_cind cind;
1447
1448 /*
1449 * Without this we will lose track of the source ID by the time the
1450 * response arrives.
1451 */
1452 srcId_cb=srcId;
1453
1454 cmd.ctrl_params = BAT_CMD_SET_PLUS_CIND;
1455 cmd.params.ptr_set_plus_cind=&cind;
1456
1457 /*
1458 * This relies on T_ACI_CIND_SIGNAL_TYPE being identical to
1459 * T_BAT_plus_cind_signal_ctrl and T_ACI_CIND_SMSFULL_TYPE being
1460 * identical to T_BAT_plus_cind_smsfull_ctrl.
1461 */
1462 cind.signal_ctrl=(T_BAT_plus_cind_signal_ctrl)sCindSettings.sCindSignalParam;
1463 cind.smsfull_ctrl=(T_BAT_plus_cind_smsfull_ctrl)sCindSettings.sCindSmsFullParam;
1464
1465 bat_send(ati_bat_get_client(srcId), &cmd);
1466 return(ATI_EXCT);
1467 }
1468 #else /* no FF_ATI_BAT */
1469
1470 tRet = sAT_PlusCIND( (T_ACI_CMD_SRC)srcId, sCindSettings.sCindSignalParam,
1471 sCindSettings.sCindSmsFullParam );
1472
1473 if (tRet EQ AT_FAIL)
1474 {
1475 cmdCmeError(CME_ERR_OpNotAllow);
1476 return ATI_FAIL;
1477 }
1478 return ATI_CMPL;
1479
1480 #endif /* no FF_ATI_BAT */
1481 }
1482
1483 /*
1484 +--------------------------------------------------------------------+
1485 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1486 | STATE : code ROUTINE : queatPlusCIND |
1487 +--------------------------------------------------------------------+
1488
1489 PURPOSE : +CIND query command
1490 (query the configured unsolicited signal strength
1491 and SMS full indication settings)
1492 */
1493 GLOBAL T_ATI_RSLT queatPlusCIND ( char *cl, UBYTE srcId )
1494 {
1495 #ifndef FF_ATI_BAT
1496 T_ACI_RETURN sRet = AT_FAIL;
1497 T_ACI_MM_CIND_VAL_TYPE sCindSettings;
1498 #endif
1499
1500 TRACE_FUNCTION("queatPlusCIND()");
1501
1502 #ifdef FF_ATI_BAT
1503 {
1504 T_BAT_cmd_send cmd;
1505 T_BAT_no_parameter dummy;
1506
1507 cmd.ctrl_params = BAT_CMD_QUE_PLUS_CIND;
1508 dummy.bat_dummy = 0xFF;
1509 cmd.params.ptr_que_plus_cind = &dummy;
1510 bat_send(ati_bat_get_client(srcId), &cmd);
1511 return(ATI_EXCT);
1512 }
1513 #else /* no FF_ATI_BAT */
1514
1515 sRet = qAT_PlusCIND( (T_ACI_CMD_SRC)srcId, &sCindSettings.sCindSignalParam,
1516 &sCindSettings.sCindSmsFullParam );
1517
1518 if ( sCindSettings.sCindSignalParam EQ CIND_SIGNAL_INDICATOR_INVALID ) { sCindSettings.sCindSignalParam = CIND_SIGNAL_INDICATOR_LVL0; }
1519 if ( sCindSettings.sCindSmsFullParam EQ CIND_SMSFULL_INDICATOR_INVALID ) { sCindSettings.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_MEMAVAIL; }
1520
1521 if (sRet EQ AT_CMPL)
1522 {
1523 resp_disp( srcId, cl,"ee", &sCindSettings.sCindSignalParam,
1524 &sCindSettings.sCindSmsFullParam );
1525 return ATI_CMPL;
1526 }
1527 else
1528 { /* error case */
1529 cmdCmeError(CME_ERR_OpNotAllow);
1530 return ATI_FAIL;
1531 }
1532
1533 #endif /* no FF_ATI_BAT */
1534 }
1535
1536 /*
1537 +--------------------------------------------------------------------+
1538 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1539 | STATE : code ROUTINE : atPlusCMER |
1540 +--------------------------------------------------------------------+
1541
1542 PURPOSE : +CMER command
1543 (configures the kind of indication handling toward terminal)
1544 */
1545 GLOBAL T_ATI_RSLT setatPlusCMER ( char *cl, UBYTE srcId )
1546 {
1547 /* UINT uiBufferCounter; */
1548 T_ACI_RETURN tRet = AT_FAIL;
1549 T_ACI_MM_CMER_VAL_TYPE sCmerSettings;
1550 T_ACI_MM_CMER_VAL_TYPE sOldCmerSettings;
1551 T_ACI_MM_CMER_VAL_TYPE sEnteredCmerSettings;
1552 UINT uiDummy1 = 0u;
1553 UINT uiDummy2 = 0u;
1554
1555 TRACE_FUNCTION("setatPLusCMER()");
1556
1557 if (!cl)
1558 {
1559 cmdCmeError(CME_ERR_OpNotAllow);
1560 return ATI_FAIL;
1561 }
1562
1563 sCmerSettings.sCmerModeParam = CMER_MODE_INVALID;
1564 sCmerSettings.sCmerIndParam = CMER_INDICATOR_INVALID;
1565 sCmerSettings.sCmerBfrParam = CMER_BFR_INVALID;
1566
1567 cl = parse(cl,"ddddd", &sCmerSettings.sCmerModeParam,
1568 &uiDummy1,
1569 &uiDummy2,
1570 &sCmerSettings.sCmerIndParam,
1571 &sCmerSettings.sCmerBfrParam );
1572
1573 if ((sCmerSettings.sCmerModeParam < CMER_MODE_INVALID OR
1574 sCmerSettings.sCmerModeParam > CMER_MODE_2) OR
1575 (sCmerSettings.sCmerIndParam < CMER_INDICATOR_INVALID OR
1576 sCmerSettings.sCmerIndParam > CMER_INDICATOR_2) OR
1577 (sCmerSettings.sCmerBfrParam < CMER_BFR_INVALID OR
1578 sCmerSettings.sCmerBfrParam > CMER_BFR_1) OR
1579 (uiDummy1 NEQ 0u) OR ((uiDummy2 NEQ 0u)))
1580 {
1581 cmdCmeError(CME_ERR_OpNotAllow);
1582 return ATI_FAIL;
1583 }
1584
1585 cmhMM_GetCmerSettings( (T_ACI_CMD_SRC)srcId, &sOldCmerSettings );
1586
1587 sEnteredCmerSettings.sCmerModeParam = sCmerSettings.sCmerModeParam;
1588
1589 #ifdef FF_ATI_BAT
1590 {
1591 T_BAT_cmd_send cmd;
1592 T_BAT_cmd_set_plus_cmer cmer;
1593
1594 /*
1595 * Without this we will lose track of the source ID by the time the
1596 * response arrives.
1597 */
1598 srcId_cb=srcId;
1599
1600 cmd.ctrl_params = BAT_CMD_SET_PLUS_CMER;
1601 cmd.params.ptr_set_plus_cmer=&cmer;
1602
1603 cmer.ind_option=BAT_CMER_IND_OPTION_NOT_PRESENT;
1604
1605 bat_send(ati_bat_get_client(srcId), &cmd);
1606 return(ATI_EXCT);
1607 }
1608 #else /* no FF_ATI_BAT */
1609
1610 tRet = sAT_PlusCMER((T_ACI_CMD_SRC)srcId, sCmerSettings.sCmerModeParam,
1611 sCmerSettings.sCmerIndParam,
1612 sCmerSettings.sCmerBfrParam );
1613 if (tRet EQ AT_FAIL)
1614 {
1615 cmdCmeError(CME_ERR_OpNotAllow);
1616 return ATI_FAIL;
1617 }
1618
1619 if ( sCmerSettings.sCmerModeParam EQ CMER_MODE_INVALID ) { sCmerSettings.sCmerModeParam = sOldCmerSettings.sCmerModeParam; }
1620 if ( sCmerSettings.sCmerIndParam EQ CMER_INDICATOR_INVALID ) { sCmerSettings.sCmerIndParam = sOldCmerSettings.sCmerIndParam; }
1621 if ( sCmerSettings.sCmerBfrParam EQ CMER_BFR_INVALID ) { sCmerSettings.sCmerBfrParam = sOldCmerSettings.sCmerBfrParam; }
1622 if ( sCmerSettings.sCmerIndParam EQ CMER_INDICATOR_INVALID ) { sCmerSettings.sCmerIndParam = CMER_INDICATOR_0; }
1623 if ( sCmerSettings.sCmerBfrParam EQ CMER_BFR_INVALID ) { sCmerSettings.sCmerBfrParam = CMER_BFR_0; }
1624
1625 switch( sCmerSettings.sCmerModeParam )
1626 {
1627 case CMER_MODE_INVALID :
1628 case CMER_MODE_0 :
1629 { /* always buffer --> do nothing */
1630 break;
1631 }
1632 case CMER_MODE_1 :
1633 case CMER_MODE_2 :
1634 { /* flush and/or clear buffer */
1635 if ( (sEnteredCmerSettings.sCmerModeParam EQ CMER_MODE_1) OR
1636 (sEnteredCmerSettings.sCmerModeParam EQ CMER_MODE_2) )
1637 {
1638 if ( sCmerSettings.sCmerBfrParam EQ CMER_BFR_0 )
1639 {
1640 cmd_clearCievBuf( srcId );
1641 }
1642 else
1643 { /* BFR == '2' */
1644 cmd_flushCievBuf( srcId );
1645 }
1646
1647 }
1648 break;
1649 }
1650 default :
1651 { /* error case */
1652 cmdCmeError(CME_ERR_OpNotAllow);
1653 return ATI_FAIL;
1654 }
1655 }
1656 return ATI_CMPL;
1657
1658 #endif /* no FF_ATI_BAT */
1659 }
1660
1661 /*
1662 +--------------------------------------------------------------------+
1663 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1664 | STATE : code ROUTINE : queatPlusCMER |
1665 +--------------------------------------------------------------------+
1666
1667 PURPOSE : +CMER query command
1668 (query the configured indication handling settings
1669 toward terminal )
1670 */
1671 GLOBAL T_ATI_RSLT queatPlusCMER ( char *cl, UBYTE srcId )
1672 {
1673 #ifndef FF_ATI_BAT
1674 T_ACI_RETURN sRet = AT_FAIL;
1675 T_ACI_MM_CMER_VAL_TYPE sCmerSettings;
1676 UINT uiDummy = 0u;
1677 #endif
1678
1679 TRACE_FUNCTION("queatPLusCMER()");
1680
1681 #ifdef FF_ATI_BAT
1682 {
1683 T_BAT_cmd_send cmd;
1684 T_BAT_no_parameter dummy;
1685
1686 cmd.ctrl_params = BAT_CMD_QUE_PLUS_CMER;
1687 dummy.bat_dummy = 0xFF;
1688 cmd.params.ptr_que_plus_cmer = &dummy;
1689 bat_send(ati_bat_get_client(srcId), &cmd);
1690 return(ATI_EXCT);
1691 }
1692 #else /* no FF_ATI_BAT */
1693
1694 sRet = qAT_PlusCMER( (T_ACI_CMD_SRC)srcId, &sCmerSettings.sCmerModeParam,
1695 &sCmerSettings.sCmerIndParam,
1696 &sCmerSettings.sCmerBfrParam );
1697
1698 if (sRet NEQ AT_CMPL)
1699 {
1700 cmdCmeError(CME_ERR_OpNotAllow);
1701 return ATI_FAIL;
1702 }
1703
1704 if ( sCmerSettings.sCmerModeParam EQ CMER_MODE_INVALID ) { sCmerSettings.sCmerModeParam = CMER_MODE_0; };
1705 if ( sCmerSettings.sCmerIndParam EQ CMER_INDICATOR_INVALID ) { sCmerSettings.sCmerIndParam = CMER_INDICATOR_0; };
1706 if ( sCmerSettings.sCmerBfrParam EQ CMER_BFR_INVALID ) { sCmerSettings.sCmerBfrParam = CMER_BFR_0; };
1707
1708 resp_disp( srcId, cl,"eeeee",&sCmerSettings.sCmerModeParam,
1709 &uiDummy,
1710 &uiDummy,
1711 &sCmerSettings.sCmerIndParam,
1712 &sCmerSettings.sCmerBfrParam );
1713 return ATI_CMPL;
1714
1715 #endif /* no FF_ATI_BAT */
1716 }
1717
1718 /*
1719 +--------------------------------------------------------------------+
1720 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1721 | STATE : code ROUTINE : cmd_flushCievBuf |
1722 +--------------------------------------------------------------------+
1723
1724 PURPOSE : This function flushes the buffer for storing new signal-
1725 and/or SMS-full indications while the serial interface is
1726 released from data transmission.
1727 */
1728 GLOBAL void cmd_flushCievBuf ( UBYTE srcId )
1729 {
1730 UINT uiBufferCounter;
1731 UINT uiTempLastIndex;
1732 T_ACI_MM_CIND_VAL_TYPE sCindValues;
1733 T_ACI_MM_CMER_VAL_TYPE sCmerSettings;
1734
1735 TRACE_FUNCTION("cmd_flushCievBuf");
1736
1737 /* Signal buffer */
1738 uiTempLastIndex = asCievSignalBuf.uiLastIndex;
1739 cmhMM_GetCmerSettings((T_ACI_CMD_SRC)srcId, &sCmerSettings);
1740 for( uiBufferCounter=0; uiBufferCounter < uiTempLastIndex; uiBufferCounter++ )
1741 {
1742 sCindValues.sCindSignalParam = asCievSignalBuf.asBufferValues[uiBufferCounter];
1743 sCindValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
1744 rCI_PlusCIEV( sCindValues, sCmerSettings );
1745 asCievSignalBuf.asBufferValues[uiBufferCounter] = CIND_SIGNAL_INDICATOR_INVALID;
1746 asCievSignalBuf.uiLastIndex--;
1747 }
1748
1749 /* SMS Full buffer */
1750 uiTempLastIndex = asCievSmsFullBuf.uiLastIndex;
1751 for( uiBufferCounter=0; uiBufferCounter < uiTempLastIndex; uiBufferCounter++ )
1752 {
1753 sCindValues.sCindSmsFullParam = asCievSmsFullBuf.asBufferValues[uiBufferCounter];
1754 sCindValues.sCindSignalParam = CIND_SIGNAL_INDICATOR_INVALID;
1755 rCI_PlusCIEV( sCindValues, sCmerSettings );
1756 asCievSmsFullBuf.asBufferValues[uiBufferCounter] = CIND_SMSFULL_INDICATOR_INVALID;
1757 asCievSmsFullBuf.uiLastIndex--;
1758 }
1759 }
1760
1761 /*
1762 +--------------------------------------------------------------------+
1763 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1764 | STATE : code ROUTINE : cmd_clearCievBuf |
1765 +--------------------------------------------------------------------+
1766
1767 PURPOSE : This function clear the buffer for storing new signal-
1768 and/or SMS-full indications
1769 */
1770 GLOBAL void cmd_clearCievBuf ( UBYTE srcId )
1771 {
1772 UBYTE tSrc;
1773
1774 for( tSrc=0; tSrc < CIEV_BUF_SIZE; tSrc++ )
1775 {
1776 asCievSignalBuf.asBufferValues[tSrc] = CIND_SIGNAL_INDICATOR_INVALID;
1777 asCievSmsFullBuf.asBufferValues[tSrc] = CIND_SMSFULL_INDICATOR_INVALID;
1778 }
1779 asCievSignalBuf.uiLastIndex = 0u;
1780 asCievSmsFullBuf.uiLastIndex = 0u;
1781 }
1782
1783 /*
1784 +--------------------------------------------------------------------+
1785 | PROJECT : GSM-F&D (8411) MODULE : ACI_CMD |
1786 | STATE : code ROUTINE : cmd_PlusCOPN_CB |
1787 +--------------------------------------------------------------------+
1788
1789 PURPOSE : Call back function for cmd_PlusCOPN_CB
1790 */
1791
1792 GLOBAL void cmd_PlusCOPN_CB ( UBYTE src_id )
1793 {
1794 SHORT startIdx;
1795 UBYTE curCmd;
1796 T_ATI_SRC_PARAMS *src_params;
1797 T_COPN_VAR *COPN_Var;
1798 BOOL ret;
1799
1800
1801 COPN_Var = &mmShrdPrm.COPN_VAR[src_id];
1802
1803
1804 startIdx = COPN_Var->Start_Count;
1805
1806
1807 TRACE_FUNCTION("cmd_PlusCOPN_CB()");
1808
1809 ret = cmd_readCOPNBlock(startIdx,src_id);
1810
1811 if (ret EQ TRUE)
1812 {
1813 src_params = find_element (ati_src_list, src_id, search_ati_src_id);
1814 curCmd = src_params->curAtCmd;
1815 R_AT( RAT_OK, (T_ACI_CMD_SRC)src_id )
1816 ( curCmd );
1817 }
1818 }
1819
1820 GLOBAL BOOL cmd_readCOPNBlock( SHORT startIdx, UBYTE src_id )
1821 {
1822 SHORT lastIdx;
1823 UBYTE idx;
1824 T_ACI_COPN_LST operLst;
1825 T_COPN_VAR *COPN_Var;
1826
1827 COPN_Var = &mmShrdPrm.COPN_VAR[src_id];
1828
1829 TRACE_FUNCTION("cmd_readCOPNBlock()");
1830
1831 if( qAT_PlusCOPN((T_ACI_CMD_SRC)src_id, COPN_LID_Cnst, startIdx,
1832 &lastIdx, operLst) EQ AT_FAIL )
1833 return TRUE;
1834
1835 for( idx=0; idx < MAX_OPER; idx++ )
1836 {
1837 if( operLst[idx].numOper[0] EQ 0x0 )
1838 return TRUE;
1839
1840 sprintf(g_sa,"+COPN: \"%s\",\"%s\"",operLst[idx].numOper,
1841 operLst[idx].alphaOper );
1842 io_sendMessage(src_id, g_sa, ATI_NORMAL_OUTPUT);
1843 }
1844 startIdx = lastIdx+1;
1845 COPN_Var->Start_Count = startIdx;
1846 return FALSE;
1847 }
1848
1849
1850 #endif /* ATI_MM_C */