FreeCalypso > hg > freecalypso-sw

comparison gsm-fw/g23m-aci/aci/cmh_mmq.c @ 775:eedbf248bac0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
gsm-fw/g23m-aci subtree: initial import from LoCosto source
author Michael Spacefalcon <msokolov@ivan.Harhan.ORG>
date Sun, 12 Oct 2014 01:45:14 +0000
parents
children c77d5b1fd6a2
comparison
equal deleted inserted replaced
774:40a721fd9854 775:eedbf248bac0
1 /*
2 +-----------------------------------------------------------------------------
3 | Project : GSM-PS (6147)
4 | Modul : CMH_MMQ
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : This module provides the query functions related to the
18 | protocol stack adapter for mobility management.
19 +-----------------------------------------------------------------------------
20 Aug 02, 2006 REF:OMAPS00083404 Prabakar R (a0393213)
21 Description: Removal of clone code: entity GDI
22 Solution: Two similar functions(rtc_get_time_date() and rtc_get_alarm()) are made into one function rtc_get_time_date().
23 As a result, interface for rtc_get_time_date() has been changed. Change has been done here to be
24 consistent with the new interface.
25 */
26
27 #ifndef CMH_MMQ_C
28 #define CMH_MMQ_C
29 #endif
30
31 #include "aci_all.h"
32
33 /*==== INCLUDES ===================================================*/
34 #include "aci_cmh.h"
35 #include "ati_cmd.h"
36 #include "aci_cmd.h"
37 #include "aci.h"
38
39 #ifdef FAX_AND_DATA
40 #include "aci_fd.h"
41 #endif /* of #ifdef FAX_AND_DATA */
42
43 #include "pcm.h"
44 #include "psa.h"
45 #include "psa_mm.h"
46 #include "psa_util.h"
47 #include "cmh.h"
48 #include "cmh_mm.h"
49 #include "rx.h"
50 #ifdef TI_PS_OP_OPN_TAB_ROMBASED
51 #include "plmn_decoder.h"
52 #include "rom_tables.h"
53 #endif
54
55 #include "rtc.h"
56
57 #ifdef FF_TIMEZONE
58 #include "rv/rv_general.h"
59 #include "rtc/rtc_tz.h"
60 #endif
61
62 #ifdef GPRS
63 #include "gaci_cmh.h"
64 #include "psa_gmm.h"
65 #endif
66
67 #ifndef _SIMULATION_
68 /******************************/
69 /* just to get FFS !!!! */
70 /* TEMPORARY until use of NVM */
71 #ifndef GPRS
72 #define DONT_LET_FFSH2_DEF_GPRS
73 #endif
74
75 #include "ffs/ffs.h"
76
77
78 /* check whether latter has defined GPRS !!! */
79 #ifdef DONT_LET_FFSH2_DEF_GPRS
80 #undef GPRS
81 #endif
82
83 #undef DONT_LET_FFSH2_DEF_GPRS
84 /***************************/
85 #endif /* _SIMULATION_ */
86
87
88 /*==== CONSTANTS ==================================================*/
89
90 /*==== EXPORT =====================================================*/
91
92 /*==== VARIABLES ==================================================*/
93 #if defined (GPRS) && defined (DTI)
94 EXTERN T_GMM_SHRD_PRM gmmShrdPrm;
95 #endif
96 EXTERN T_ONS_READ_STATE ONSReadStatus;
97 /*==== FUNCTIONS ==================================================*/
98
99 EXTERN BOOL cmhSIM_plmn_is_hplmn();
100
101 LOCAL T_ACI_RETURN qat_plus_percent_COPS( T_ACI_CMD_SRC srcId,
102 T_ACI_COPS_MOD * mode,
103 T_ACI_COPS_FRMT * format,
104 CHAR * oper,
105 T_ACI_COPS_SVST * svrStatus);
106 #ifdef TI_PS_FF_AT_P_CMD_CTREG
107 EXTERN BOOL cl_shrd_get_treg_val(T_ACI_TREG *treg);
108 #endif /* TI_PS_FF_AT_P_CMD_CTREG */
109
110 /*
111 +--------------------------------------------------------------------+
112 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
113 | STATE : code ROUTINE : qAT_PercentBAND |
114 +--------------------------------------------------------------------+
115
116 PURPOSE : This is the functional counterpart to the %BAND? AT command
117 which returns the current multiband configuration.
118
119 <bandMode>: band switch mode.
120 <bandType>: band selection.
121 */
122
123 GLOBAL T_ACI_RETURN qAT_PercentBAND(T_ACI_CMD_SRC srcId,
124 T_ACI_BAND_MODE *bandMode,
125 UBYTE *bandType)
126 {
127 UBYTE dummy;
128
129 TRACE_FUNCTION ("qAT_PercentBAND()");
130
131 /* check command source */
132 if(!cmh_IsVldCmdSrc (srcId))
133 {
134 return( AT_FAIL );
135 }
136
137 if( bandMode EQ NULL OR
138 bandType EQ NULL )
139 {
140 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
141 return( AT_FAIL );
142 }
143
144 if(!cmhMM_getBandSettings( bandType, &dummy ))
145 {
146 *bandMode = BAND_MODE_Auto;
147 }
148 else
149 {
150 *bandMode = BAND_MODE_Manual;
151 }
152
153 return( AT_CMPL );
154 }
155
156 /*
157 +--------------------------------------------------------------------+
158 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
159 | STATE : code ROUTINE : qAT_PlusCOPS |
160 +--------------------------------------------------------------------+
161
162 PURPOSE : This is the functional counterpart to the +COPS? AT command
163 which returns the current setting of mode, format and
164 operator.
165
166 <mode>: registration mode.
167 <format>: format of operator
168 <oper>: operator string
169 */
170
171 GLOBAL T_ACI_RETURN qAT_PlusCOPS ( T_ACI_CMD_SRC srcId,
172 T_ACI_COPS_MOD * mode,
173 T_ACI_COPS_FRMT * format,
174 CHAR * oper )
175 {
176 /* Implements Measure 127 */
177 return (qat_plus_percent_COPS (srcId, mode, format, oper, NULL ) );
178
179 }
180
181
182 /*
183 +--------------------------------------------------------------------+
184 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
185 | STATE : code ROUTINE : qAT_PercentCOPS |
186 +--------------------------------------------------------------------+
187
188 PURPOSE : This is the functional counterpart to the +COPS? AT command
189 which returns the current setting of mode, format and
190 operator.
191
192 <mode>: registration mode.
193 <format>: format of operator
194 <oper>: operator string
195 */
196
197 GLOBAL T_ACI_RETURN qAT_PercentCOPS ( T_ACI_CMD_SRC srcId,
198 T_ACI_COPS_MOD * mode,
199 T_ACI_COPS_FRMT * format,
200 T_ACI_COPS_SVST * svrStatus,
201 CHAR * oper )
202 {
203 /* Implements Measure 127 */
204 return (qat_plus_percent_COPS (srcId, mode, format, oper, svrStatus ) );
205 }
206
207
208
209
210 /*
211 +--------------------------------------------------------------------+
212 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
213 | STATE : code ROUTINE : qAT_PlusCREG |
214 +--------------------------------------------------------------------+
215
216 PURPOSE : This is the functional counterpart to the +CREG? AT command
217 which returns the current setting of registration status.
218
219 <stat>: registration status.
220 <lac>: current lac.
221 <cid>: current cell id.
222 */
223
224 GLOBAL T_ACI_RETURN qAT_PlusCREG ( T_ACI_CMD_SRC srcId,
225 T_ACI_CREG_STAT *stat,
226 USHORT *lac,
227 USHORT *cid )
228 {
229
230 TRACE_FUNCTION ("qAT_PlusCREG()");
231
232 /*
233 *-------------------------------------------------------------------
234 * fill in parameters
235 *-------------------------------------------------------------------
236 */
237 *stat = mmShrdPrm.creg_status;
238 *lac = mmShrdPrm.lac;
239 *cid = mmShrdPrm.cid;
240
241 return( AT_CMPL );
242 }
243
244 /*
245 +--------------------------------------------------------------------+
246 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
247 | STATE : code ROUTINE : qAT_PercentCREG |
248 +--------------------------------------------------------------------+
249
250 PURPOSE : This is the functional counterpart to the +CREG? AT command
251 which returns the current setting of registration status.
252
253 <stat>: registration status.
254 <lac>: current lac.
255 <cid>: current cell id.
256 <gprs_ind>: if GPRS is available or not
257 */
258
259 GLOBAL T_ACI_RETURN qAT_PercentCREG ( T_ACI_CMD_SRC srcId,
260 T_ACI_CREG_STAT *stat,
261 USHORT *lac,
262 USHORT *cid,
263 T_ACI_P_CREG_GPRS_IND *gprs_ind,
264 U8* rt)
265 {
266
267 TRACE_FUNCTION ("qAT_PercentCREG()");
268
269 qAT_PlusCREG (srcId, stat, lac, cid);
270
271 #if defined (GPRS) AND defined (DTI)
272 *gprs_ind = gmmShrdPrm.gprs_indicator;
273 *rt = gmmShrdPrm.rt;
274 #else
275 *gprs_ind = P_CREG_GPRS_Not_Supported; /* ACI-SPR-17218: use ACI type */
276 *rt = 0;
277 #endif /* GPRS */
278
279 return( AT_CMPL );
280 }
281
282 #ifdef TI_PS_FF_AT_CMD_WS46
283 /*
284 +--------------------------------------------------------------------+
285 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
286 | STATE : code ROUTINE : qAT_PlusWS46 |
287 +--------------------------------------------------------------------+
288
289 PURPOSE : This is the functional counterpart to the +WS46? AT
290 command which returns the current setting wireless network
291 selection.
292
293 <mode>: network mode.
294 */
295
296 GLOBAL T_ACI_RETURN qAT_PlusWS46 (T_ACI_CMD_SRC srcId,
297 T_ACI_WS46_MOD * mode )
298 {
299
300 TRACE_FUNCTION ("qAT_PlusWS46()");
301
302 /*
303 *-------------------------------------------------------------------
304 * fill in parameters
305 *-------------------------------------------------------------------
306 */
307 *mode = WS46_MOD_Gsm;
308
309 return( AT_CMPL );
310 }
311 #endif /* TI_PS_FF_AT_CMD_WS46 */
312 /*
313 +--------------------------------------------------------------------+
314 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
315 | STATE : code ROUTINE : qAT_PlusCOPN |
316 +--------------------------------------------------------------------+
317
318 PURPOSE : This is the functional counterpart to the +COPN AT
319 command which returns the current operator names stored in
320 ME.
321
322 <lstId>: list identifier.
323 <startIdx>: start index to read from.
324 <lastIdx>: buffer for index of last copied name.
325 <oprLstBuf>: buffer for operator names. length of MAX_OPER.
326 */
327
328 GLOBAL T_ACI_RETURN qAT_PlusCOPN ( T_ACI_CMD_SRC srcId,
329 T_ACI_COPN_LID lstId,
330 SHORT startIdx,
331 SHORT *lastIdx,
332 T_ACI_COPN_OPDESC *oprLstBuf)
333 {
334 USHORT idx; /* holds list idx */
335 EF_PLMN plmnBuf; /* buffer PCM entry */
336 USHORT maxRec; /* holds maximum records */
337 USHORT recNr; /* holds record number */
338 USHORT oprLstLen; /* holds fixed oper list length */
339 UBYTE retVal; /* holds return value */
340 UBYTE ver; /* holds version */
341 UBYTE len; /* holds operator name length */
342
343 #ifdef TI_PS_OP_OPN_TAB_ROMBASED
344 /* Changes for ROM data */
345 const UBYTE *plmn_comp_entry; /* get a local pointer holder */
346 T_OPER_ENTRY oper;
347 int i;
348 #endif
349
350 TRACE_FUNCTION ("qAT_PlusCOPN()");
351
352 /*
353 *-------------------------------------------------------------------
354 * determine list identifier
355 *-------------------------------------------------------------------
356 */
357 switch( lstId )
358 {
359 /*
360 *-----------------------------------------------------------------
361 * for the list in permanent configuration memory
362 *-----------------------------------------------------------------
363 */
364 case( COPN_LID_Pcm ):
365
366 recNr = startIdx+1;
367 idx = 0;
368
369 do
370 {
371 /* Implements Measure#32: Row 981 */
372 retVal= pcm_ReadRecord( (UBYTE *) ef_plmn_id, recNr, SIZE_EF_PLMN,
373 (UBYTE *) &plmnBuf, &ver, &maxRec );
374
375 if( retVal EQ PCM_INVALID_SIZE OR retVal EQ PCM_INVALID_RECORD )
376 {
377 if( idx EQ 0 )
378 {
379 ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_InvIdx );
380 return( AT_FAIL );
381 }
382 break;
383 }
384
385 if( plmnBuf.mcc[0] NEQ 0xFF AND plmnBuf.mnc[0] NEQ 0xFF AND
386 plmnBuf.lngNam[0] NEQ 0xFF )
387 {
388 /* Implements Measure#32: Row 980 */
389 sprintf(oprLstBuf[idx].numOper, format_03x02x_str,
390 ((plmnBuf.mcc[0]<<8) + plmnBuf.mcc[1]),
391 ((plmnBuf.mnc[0]<<8) + plmnBuf.mnc[1]));
392
393 for( len = 0;
394 len < SIZE_EF_PLMN_LONG AND plmnBuf.lngNam[len] NEQ 0xFF;
395 len++ )
396 ;
397
398 utl_cvtGsmIra( plmnBuf.lngNam, len,
399 (UBYTE*)oprLstBuf[idx].alphaOper,
400 MAX_ALPHA_OPER_LEN,
401 CSCS_DIR_GsmToIra );
402
403 oprLstBuf[idx].alphaOper[MINIMUM(len,MAX_ALPHA_OPER_LEN-1)] = 0x0;
404 idx++;
405 }
406
407 recNr++;
408 }
409 while( idx < MAX_OPER );
410
411 break;
412 /*
413 *-----------------------------------------------------------------
414 * for the list in constant memory
415 *-----------------------------------------------------------------
416 */
417 case( COPN_LID_Cnst ):
418
419 oprLstLen = cmhMM_GetOperLstLen();
420
421 if( startIdx >= oprLstLen )
422 {
423 ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_InvIdx );
424 return( AT_FAIL );
425 }
426 #ifdef TI_PS_OP_OPN_TAB_ROMBASED
427 /* Changes for ROM data */
428
429 plmn_comp_entry = ptr_plmn_compressed;
430
431 /* skip the first (start-1) number of plmn entries. */
432 i=0;
433 while (i < startIdx) {
434 plmn_comp_entry += cmhMM_PlmnEntryLength (plmn_comp_entry);
435 i+=1;
436 }
437
438 for( idx = 0, recNr = startIdx;
439 idx < MAX_OPER AND recNr < oprLstLen AND
440 !(cmhMM_decodePlmn (&oper, plmn_comp_entry));
441 idx++, recNr++ )
442 {
443 /* Implements Measure#32: Row 980 */
444 cmhMM_mcc_mnc_print(&(oprLstBuf[idx].numOper[0]),
445 oper.mcc,
446 oper.mnc);
447
448 strncpy( oprLstBuf[idx].alphaOper, oper.longName,
449 MAX_ALPHA_OPER_LEN-1 );
450
451 oprLstBuf[idx].alphaOper[MAX_ALPHA_OPER_LEN-1] = 0x0;
452
453 /* Next compressed PLMN entry */
454 plmn_comp_entry += cmhMM_PlmnEntryLength (plmn_comp_entry);
455 }
456 #else
457 for( idx = 0, recNr = startIdx;
458 idx < MAX_OPER AND recNr < oprLstLen;
459 idx++, recNr++ )
460 {
461 /* Implements Measure#32: Row 980 */
462 cmhMM_mcc_mnc_print(&(oprLstBuf[idx].numOper[0]),
463 operListFixed[recNr].mcc,
464 operListFixed[recNr].mnc);
465
466 strncpy( oprLstBuf[idx].alphaOper, operListFixed[recNr].longName,
467 MAX_ALPHA_OPER_LEN-1 );
468
469 oprLstBuf[idx].alphaOper[MAX_ALPHA_OPER_LEN-1] = 0x0;
470 }
471 #endif
472 break;
473 /*
474 *-----------------------------------------------------------------
475 * unexpected list type
476 *-----------------------------------------------------------------
477 */
478 default:
479
480 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
481 return( AT_FAIL );
482 }
483
484 /*
485 *-------------------------------------------------------------------
486 * terminate list and set last index
487 *-------------------------------------------------------------------
488 */
489 if( idx < MAX_OPER )
490 {
491 oprLstBuf[idx].numOper[0] = 0x0;
492 oprLstBuf[idx].alphaOper[0] = 0x0;
493 }
494
495
496 *lastIdx = ( recNr NEQ 0 )?recNr-1:0;
497
498 return( AT_CMPL );
499 }
500
501 /*
502 +-------------------------------------------------------------------+
503 | NEW AT Command qAT_PercentCOPN |
504 | |
505 +-------------------------------------------------------------------+
506 */
507 /*The same function in EDGE should be remved from ACIA when EDGE is
508 merged to the UMTS*/
509
510 GLOBAL T_ACI_RETURN qAT_PercentCOPN( T_ACI_CMD_SRC srcId,
511 T_ACI_COPS_FRMT format,
512 CHAR *opr,
513 T_ACI_OPER_NTRY *oper_ntry)
514 {
515 T_OPER_ENTRY plmnDesc;
516 BOOL found;
517
518 if(format EQ COPS_FRMT_Numeric)
519 {
520 found = cmhMM_FindNumeric(&plmnDesc, opr);
521 }
522 else
523 {
524 found = cmhMM_FindName(&plmnDesc, opr,(T_ACI_CPOL_FRMT)format);
525 }
526 if (found)
527 {
528 oper_ntry->mcc = plmnDesc.mcc;
529 oper_ntry->mnc = plmnDesc.mnc;
530 strncpy (oper_ntry->longName, plmnDesc.longName, sizeof(oper_ntry->longName));
531 oper_ntry->longName[sizeof(oper_ntry->longName) - 1] = '\0';
532 strncpy ((CHAR *)oper_ntry->shrtName, plmnDesc.shrtName, sizeof(oper_ntry->shrtName));
533 oper_ntry->shrtName[sizeof(oper_ntry->shrtName) - 1] = '\0';
534 oper_ntry->long_len = plmnDesc.long_len;
535 oper_ntry->shrt_len = plmnDesc.shrt_len;
536 switch (plmnDesc.pnn)
537 {
538 case Read_EONS:
539 oper_ntry->source = Read_EONS;
540 break;
541 case Read_CPHS:
542 oper_ntry->source = Read_CPHS;
543 break;
544 default:
545 oper_ntry->source = Read_ROM_TABLE;
546 break;
547 }
548 }
549 else
550 {
551 oper_ntry->longName[0] = '\0';
552 oper_ntry->shrtName[0] = '\0';
553 oper_ntry->mcc = 0;
554 oper_ntry->mnc = 0;
555 oper_ntry->source = Read_INVALID;
556 }
557 return AT_CMPL;
558 }
559
560
561
562
563 /*
564 +--------------------------------------------------------------------+
565 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
566 | STATE : code ROUTINE : qAT_PercentNRG |
567 +--------------------------------------------------------------------+
568
569 PURPOSE : This is the functional counterpart to the %NRG? AT command
570 which returns the current setting of registration mode and
571 service mode and the current status of service.
572
573 <regMode>: registration mode.
574 <srvMode>: service mode.
575 <oprFrmt>: operator format.
576 <srvStat>: service status.
577 <oper> : operator
578 */
579
580 GLOBAL T_ACI_RETURN qAT_PercentNRG( T_ACI_CMD_SRC srcId,
581 T_ACI_NRG_RGMD *regMode,
582 T_ACI_NRG_SVMD *srvMode,
583 T_ACI_NRG_FRMT *oprFrmt,
584 T_ACI_NRG_SVMD *srvStat,
585 CHAR *oper)
586 {
587
588 T_ACI_COPS_FRMT copsFormat;
589
590
591 TRACE_FUNCTION ("qAT_PercentNRG()");
592
593 /*
594 *-------------------------------------------------------------------
595 * check command source
596 *-------------------------------------------------------------------
597 */
598 if(!cmh_IsVldCmdSrc (srcId))
599 {
600 return( AT_FAIL );
601 }
602
603 /*
604 *-------------------------------------------------------------------
605 * fill in parameters
606 *-------------------------------------------------------------------
607 */
608 switch( mmShrdPrm.regStat )
609 {
610 case( NO_VLD_RS ):
611 case( RS_NO_SRV ): *srvStat = NRG_SVMD_NoSrv; break;
612 case( RS_LMTD_SRV ): *srvStat = NRG_SVMD_Limited; break;
613 case( RS_FULL_SRV ): *srvStat = NRG_SVMD_Full; break;
614 default: *srvStat = NRG_SVMD_NotPresent; break;
615 }
616
617 *srvMode = cmhPrm[srcId].mmCmdPrm.NRGsrvMode;
618 *oprFrmt = cmhPrm[srcId].mmCmdPrm.NRGoprFrmt;
619 *oper = 0x0;
620
621 *regMode = cmhPrm[srcId].mmCmdPrm.NRGregMode;
622
623 switch( *oprFrmt )
624 {
625 case( NRG_FRMT_NotPresent ):
626 copsFormat = COPS_FRMT_NotPresent;
627 break;
628 case( NRG_FRMT_Numeric ):
629 copsFormat = COPS_FRMT_Numeric ;
630 break;
631 case( NRG_FRMT_Short):
632 copsFormat = COPS_FRMT_Short ;
633 break;
634 case( NRG_FRMT_Long):
635 copsFormat = COPS_FRMT_Long;
636 break;
637 default:
638 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
639 return( AT_FAIL );
640 }
641
642
643 cmhMM_OperatorQuery(srcId,copsFormat,oper);
644
645
646
647 return( AT_CMPL );
648 }
649
650 /*
651 +--------------------------------------------------------------------+
652 | PROJECT : ACI/MMI MODULE : CMH_MMS |
653 | STATE : code ROUTINE : qAT_PercentCSQ |
654 +--------------------------------------------------------------------+
655
656 PURPOSE : This is the function for Signal Quality query
657
658 Shen,Chao
659 Juni.13th, 2003
660 */
661 #ifdef FF_PS_RSSI
662 GLOBAL T_ACI_RETURN qAT_PercentCSQ( T_ACI_CMD_SRC srcId,
663 UBYTE *rssi,
664 UBYTE *ber,
665 UBYTE *actlevel,
666 UBYTE *min_access_level)
667 #else
668 GLOBAL T_ACI_RETURN qAT_PercentCSQ( T_ACI_CMD_SRC srcId,
669 UBYTE *rssi,
670 UBYTE *ber,
671 UBYTE *actlevel)
672 #endif
673 {
674 rx_Status_Type rxStat;
675
676 TRACE_FUNCTION("qAT_PercentCSQ()");
677
678 if ( rx_GetStatus ( &rxStat ) NEQ DRV_OK )
679 {
680 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
681 return AT_FAIL;
682 }
683 else
684 {
685 if ( rxStat.gsmLevel EQ 0xFF OR rxStat.gsmLevel EQ 0 )
686 {
687 *rssi = ACI_RSSI_FAULT;
688 }
689 else if ( rxStat.gsmLevel > 59 )
690 {
691 *rssi = 31;
692 }
693 else
694 {
695 *rssi = ( rxStat.gsmLevel / 2 ) + 2;
696 }
697
698 if ( rxStat.rxQuality EQ RX_QUAL_UNAVAILABLE )
699 {
700 *ber = ACI_BER_FAULT;
701 }
702 else
703 {
704 *ber = rxStat.rxQuality;
705 }
706
707 *actlevel = rxStat.actLevel;
708
709
710 #ifdef FF_PS_RSSI
711 if ( rxStat.min_access_level EQ RX_ACCE_UNAVAILABLE )
712 {
713 *min_access_level = ACI_MIN_RXLEV_FAULT;
714 }
715 else
716 {
717 *min_access_level = rxStat.min_access_level;
718 }
719 #endif
720
721 return AT_CMPL;
722 }
723 }
724
725 #ifdef TI_PS_FF_AT_P_CMD_DBGINFO
726 /*
727 +--------------------------------------------------------------------+
728 | PROJECT : ACI/MMI MODULE : CMH_MMS |
729 | STATE : code ROUTINE : qAT_PercentDBGINFO |
730 +--------------------------------------------------------------------+
731
732 PURPOSE : query free mem pool blocks.
733 */
734 GLOBAL T_ACI_RETURN qAT_PercentDBGINFO(T_ACI_CMD_SRC srcId,
735 ULONG param,
736 USHORT stor,
737 USHORT *free,
738 USHORT *alloc)
739 {
740 int ret=0;
741
742 TRACE_FUNCTION ("qAT_PercentDBGINFO()");
743 /*
744 *-----------------------------------------------------------------
745 * check command source
746 *-----------------------------------------------------------------
747 */
748 if( ! cmh_IsVldCmdSrc (srcId) )
749 {
750 return (AT_FAIL);
751 }
752
753 ret = vsi_m_status (hCommACI,
754 param,
755 stor,
756 free,
757 alloc );
758 if (ret EQ VSI_ERROR OR *free EQ 0)
759 {
760 ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_MemFull );
761 return (AT_FAIL);
762 }
763
764 return (AT_CMPL);
765 }
766 #endif /* TI_PS_FF_AT_P_CMD_DBGINFO */
767
768 /*
769 +--------------------------------------------------------------------+
770 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
771 | STATE : code ROUTINE : qAT_PlusCTZR |
772 +--------------------------------------------------------------------+
773
774 PURPOSE : This is the functional counterpart to the +CTZR AT command
775 which will query the status of CTZRmode, indicating whether time
776 zone change rep[orting is enabled or disabled.
777
778 <on/off>: Indicates whether time zone reporting is enabled or disabled.
779 */
780
781 GLOBAL T_ACI_RETURN qAT_PlusCTZR ( T_ACI_CMD_SRC srcId,
782 T_ACI_CTZR_MODE *mode)
783 {
784 TRACE_FUNCTION ("qAT_PlusCTZR()");
785
786 /*
787 *-------------------------------------------------------------------
788 * check command source
789 *-------------------------------------------------------------------
790 */
791 if(!cmh_IsVldCmdSrc (srcId))
792 {
793 TRACE_EVENT_P1("qAT_PlusCTZR(): Invalid source: %d", srcId);
794 return( AT_FAIL );
795 }
796
797 *mode = cmhPrm[srcId].mmCmdPrm.CTZRMode;
798
799 return( AT_CMPL );
800 }
801
802 /*
803 +--------------------------------------------------------------------+
804 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
805 | STATE : code ROUTINE : qAT_PlusCTZU |
806 +--------------------------------------------------------------------+
807
808 PURPOSE : This is the functional counterpart to the +CTZU AT command
809 which will query the status of CTZUmode, indicating whether time
810 zone automatic update is enabled or disabled.
811
812 <on/off>: Indicates whether time zone automatic update is enabled or disabled.
813 */
814
815 GLOBAL T_ACI_RETURN qAT_PlusCTZU ( T_ACI_CMD_SRC srcId,
816 T_ACI_CTZU_MODE *mode)
817 {
818 TRACE_FUNCTION ("qAT_PlusCTZU()");
819
820 /*
821 *-------------------------------------------------------------------
822 * check command source
823 *-------------------------------------------------------------------
824 */
825 if(!cmh_IsVldCmdSrc (srcId))
826 {
827 TRACE_EVENT_P1("qAT_PlusCTZU(): Invalid source: %d", srcId);
828 return( AT_FAIL );
829 }
830
831 *mode = cmhPrm[srcId].mmCmdPrm.CTZUMode;
832
833 return( AT_CMPL );
834 }
835
836 /*
837 +--------------------------------------------------------------------+
838 | PROJECT : MODULE : CMH_MMS |
839 | STATE : code ROUTINE : qAT_PlusCCLK |
840 +--------------------------------------------------------------------+
841
842 PURPOSE : This is the functional counterpart to the sAT_PlusCCLK command
843 which will query the status of the RTC in the MT, indicating what the time
844 is in the MT.
845 */
846 GLOBAL T_ACI_RETURN qAT_PlusCCLK ( T_ACI_CMD_SRC srcId,
847 T_ACI_RTC_DATE *date_s,
848 T_ACI_RTC_TIME *time_s,
849 int * timeZone
850 )
851 {
852 #ifndef _SIMULATION_
853 UBYTE ret;
854 #endif /* _SIMULATION_ */
855
856 TRACE_FUNCTION ("qAT_PlusCCLK()");
857 /*
858 *-------------------------------------------------------------------
859 * check command source
860 *-------------------------------------------------------------------
861 */
862 if(!cmh_IsVldCmdSrc (srcId))
863 {
864 TRACE_EVENT_P1("qAT_PlusCCLK(): Invalid source: %d", srcId);
865 return( AT_FAIL );
866 }
867
868 TRACE_EVENT("qAT_PlusCCLK(): get time and date " );
869 #ifndef _SIMULATION_
870 /*
871 Aug 02, 2006 REF:OMAPS00083404 Prabakar R (a0393213)
872 Description: Removal of clone code: entity GDI
873 Solution: Two similar functions(rtc_get_time_date() and rtc_get_alarm()) are made into one function rtc_get_time_date().
874 As a result, interface for rtc_get_time_date() has been changed. Change has been done here to be
875 consistent with the new interface.
876 */
877 ret = rtc_get_time_date((T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s, RTC_TIME_TYPE_CURRENT);
878 switch (ret)
879 {
880 case 0: /* RVF_OK */
881 #ifdef FF_TIMEZONE
882 *timeZone = RTC_GetCurrentTZ(); /* Get current timezone now time and date are obtained.*/
883 TRACE_EVENT_P1("qAT_PlusCCLK(): timezone obatained: %d", *timeZone);
884 #endif /* FF_TIMEZONE */
885 return( AT_CMPL );
886 default:
887 TRACE_EVENT_P1("qAT_PlusCCLK(): ERROR: %d", ret); /* RVF_NOT_READY or RVF_INTERNAL ERROR */
888 return( AT_FAIL );
889 }
890 #else /* _SIMULATION_ */
891 /* Set return info for date time to: "04/08/17,13:31:04-10" */
892 date_s->year = 2004;
893 date_s->month = 8;
894 date_s->day = 17;
895
896 time_s->hour = 13;
897 time_s->minute = 31;
898 time_s->second = 4;
899
900 time_s->format = 0; /* RTC_TIME_FORMAT_24HOUR = 0 */
901 time_s->PM_flag = 0;
902 *timeZone = -10; /* Set timezone to -10 */
903 return( AT_CMPL );
904 #endif /* _SIMULATION_ */
905
906 }
907
908
909
910 /*
911 +--------------------------------------------------------------------+
912 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
913 | STATE : code ROUTINE : qAT_PercentCTZV |
914 +--------------------------------------------------------------------+
915
916 PURPOSE : This is the functional counterpart to the %CTZV AT command
917 which will query the status of PCTZVmode, indicating whether time
918 and date report is enabled or disabled.
919
920 <on/off>: Indicates whether time and date report is enabled or disabled.
921 */
922
923 GLOBAL T_ACI_RETURN qAT_PercentCTZV ( T_ACI_CMD_SRC srcId,
924 T_ACI_PCTZV_MODE *mode)
925 {
926 TRACE_FUNCTION ("qAT_PercentCTZV()");
927
928 /*
929 *-------------------------------------------------------------------
930 * check command source
931 *-------------------------------------------------------------------
932 */
933 if(!cmh_IsVldCmdSrc (srcId))
934 {
935 TRACE_EVENT_P1("qAT_PercentCTZV(): Invalid source: %d", srcId);
936 return( AT_FAIL );
937 }
938
939 *mode = cmhPrm[srcId].mmCmdPrm.PCTZVMode;
940
941 return( AT_CMPL );
942 }
943
944
945 /*
946 +--------------------------------------------------------------------+
947 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
948 | STATE : code ROUTINE : qAT_PercentCNIV |
949 +--------------------------------------------------------------------+
950
951 PURPOSE : This is the functional counterpart to the %CNIV AT command
952 which will query the status of CNIVmode, indicating whether time
953 and date report is enabled or disabled.
954
955 <on/off>: Indicates whether time and date report is enabled or disabled.
956 */
957
958 GLOBAL T_ACI_RETURN qAT_PercentCNIV ( T_ACI_CMD_SRC srcId,
959 T_ACI_CNIV_MODE *mode)
960 {
961 TRACE_FUNCTION ("qAT_PercentCNIV()");
962
963 /*
964 *-------------------------------------------------------------------
965 * check command source
966 *-------------------------------------------------------------------
967 */
968 if(!cmh_IsVldCmdSrc (srcId))
969 {
970 TRACE_EVENT_P1("qAT_PercentCNIV(): Invalid source: %d", srcId);
971 return( AT_FAIL );
972 }
973
974 *mode = cmhPrm[srcId].mmCmdPrm.CNIVMode;
975
976 return( AT_CMPL );
977 }
978
979 /*
980 +--------------------------------------------------------------------+
981 | PROJECT : ACI/MMI MODULE : CMH_MMS |
982 | STATE : code ROUTINE : qAT_PlusCIND |
983 +--------------------------------------------------------------------+
984
985 PURPOSE : This is the function for Signal Quality query
986 */
987
988 GLOBAL T_ACI_RETURN qAT_PlusCIND ( T_ACI_CMD_SRC srcId,
989 T_ACI_CIND_SIGNAL_TYPE *sCindSgnalSettings,
990 T_ACI_CIND_SMSFULL_TYPE *sCindSmsFullSettings )
991 {
992 T_ACI_MM_CIND_VAL_TYPE *pMMCmdPrm;
993
994 TRACE_FUNCTION ("qAT_PlusCIND()");
995
996 if( !cmh_IsVldCmdSrc( srcId ) OR (sCindSgnalSettings EQ NULL) OR (sCindSmsFullSettings EQ NULL) )
997 {
998 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
999 return( AT_FAIL );
1000 }
1001
1002 pMMCmdPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
1003
1004 *sCindSgnalSettings = pMMCmdPrm->sCindSignalParam;
1005 *sCindSmsFullSettings = pMMCmdPrm->sCindSmsFullParam;
1006
1007 return(AT_CMPL);
1008 }
1009
1010
1011 /*
1012 +--------------------------------------------------------------------+
1013 | PROJECT : ACI/MMI MODULE : CMH_MMS |
1014 | STATE : code ROUTINE : qAT_PlusCMER |
1015 +--------------------------------------------------------------------+
1016
1017 PURPOSE : This is the function for Signal Quality query
1018 */
1019
1020 GLOBAL T_ACI_RETURN qAT_PlusCMER ( T_ACI_CMD_SRC srcId,
1021 T_ACI_CMER_MODE_TYPE *sCmerModeSettings,
1022 T_ACI_CMER_IND_TYPE *sCmerIndicationSettings,
1023 T_ACI_CMER_BFR_TYPE *sCmerBfrSettings )
1024
1025 {
1026 T_ACI_MM_CMER_VAL_TYPE *pMMCmdPrm;
1027
1028 TRACE_FUNCTION ("qAT_PlusCMER()");
1029
1030 if( !cmh_IsVldCmdSrc( srcId ) OR (sCmerModeSettings EQ NULL) OR
1031 (sCmerIndicationSettings EQ NULL) OR (sCmerBfrSettings EQ NULL))
1032 {
1033 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1034 return( AT_FAIL );
1035 }
1036
1037 pMMCmdPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
1038
1039 *sCmerModeSettings = pMMCmdPrm->sCmerModeParam;
1040 *sCmerIndicationSettings = pMMCmdPrm->sCmerIndParam;
1041 *sCmerBfrSettings = pMMCmdPrm->sCmerBfrParam;
1042
1043 return(AT_CMPL);
1044 }
1045
1046 /* Implements Measure 127 */
1047 /*
1048 +------------------------------------------------------------------------------
1049 | Function : qat_plus_percent_COPS
1050 +------------------------------------------------------------------------------
1051 | Purpose : This is the functional counterpart to Both +COPS? and %COPS
1052 | AT command which returns the current setting of mode,
1053 | format and operator.
1054 |
1055 | Parameters : srcId - AT command source identifier
1056 | mode - +COPS parameter <mode>
1057 | format - +COPS parameter <format>
1058 | oper - Operator
1059 | svrStatus - %COPS parameter <srvStatus>
1060 | at_cmd_id - AT Command Identifier
1061 |
1062 | Return : ACI functional return codes
1063 +------------------------------------------------------------------------------
1064 */
1065
1066 LOCAL T_ACI_RETURN qat_plus_percent_COPS( T_ACI_CMD_SRC srcId, T_ACI_COPS_MOD * mode,
1067 T_ACI_COPS_FRMT * format, CHAR * oper,
1068 T_ACI_COPS_SVST * svrStatus)
1069 {
1070
1071 T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */
1072
1073 TRACE_FUNCTION ("qat_plus_percent_COPS()");
1074
1075 /* check command source */
1076 if(!cmh_IsVldCmdSrc (srcId))
1077 {
1078 return( AT_FAIL );
1079 }
1080
1081 pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
1082
1083 /* fill in parameters */
1084 switch(mmShrdPrm.COPSmode)
1085 {
1086 case(COPS_MOD_Auto):
1087 case(COPS_MOD_Man):
1088 case(COPS_MOD_Dereg):
1089 *mode = mmShrdPrm.COPSmode;
1090 break;
1091
1092 /*
1093 * case(COPS_MOD_SetOnly):
1094 * mmShrdPrm.COPSmode can't have been set with this value
1095 */
1096
1097 case(COPS_MOD_Both):
1098 if(mmShrdPrm.regModeAutoBack)
1099 {
1100 *mode = COPS_MOD_Man;
1101 }
1102 else
1103 {
1104 *mode = COPS_MOD_Auto;
1105 }
1106 break;
1107
1108 default:
1109 *mode = (T_ACI_COPS_MOD)mmShrdPrm.regMode;
1110 break;
1111 }
1112
1113 *format = pMMCmdPrm -> COPSfrmt;
1114
1115 if ( svrStatus )
1116 {
1117 switch( mmShrdPrm.regStat )
1118 {
1119 case( NO_VLD_RS ):
1120 case( RS_NO_SRV ): *svrStatus = COPS_SVST_NoSrv; break;
1121 case( RS_LMTD_SRV ): *svrStatus =COPS_SVST_Limited; break;
1122 case( RS_FULL_SRV ): *svrStatus = COPS_SVST_Full; break;
1123 default: *svrStatus = COPS_SVST_NotPresent; break;
1124 }
1125 }
1126
1127 *oper = 0x0;
1128 cmhMM_OperatorQuery(srcId,pMMCmdPrm -> COPSfrmt,oper);
1129 TRACE_EVENT(oper);
1130 return( AT_CMPL );
1131 }
1132 #ifdef TI_PS_FF_AT_P_CMD_CTREG
1133 /*
1134 +--------------------------------------------------------------------+
1135 | PROJECT : ACI/MMI MODULE : CMH_MMS |
1136 | STATE : code ROUTINE : qAT_PlusCTREG |
1137 +--------------------------------------------------------------------+
1138
1139 PURPOSE : This is the function for Signal Quality query
1140 */
1141
1142 GLOBAL T_ACI_RETURN qAT_PercentCTREG ( T_ACI_CMD_SRC srcId, T_ACI_TREG *treg )
1143 {
1144 BOOL ret = FALSE;
1145
1146 TRACE_FUNCTION ("qAT_PlusCTREG()");
1147
1148 if( !cmh_IsVldCmdSrc( srcId ))
1149 {
1150 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1151 return( AT_FAIL );
1152 }
1153
1154 ret = cl_shrd_get_treg_val(treg);
1155
1156 if(ret EQ TRUE)
1157 {
1158 return (AT_CMPL);
1159 }
1160
1161 return (AT_FAIL);
1162 }
1163 #endif /* TI_PS_FF_AT_P_CMD_CTREG */
1164
1165 /*==== EOF ========================================================*/