--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/g23m-gsm/dl/cus_dl.h	Sun Sep 28 23:20:04 2014 +0000
@@ -0,0 +1,117 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :
+|  Modul   :
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  Custom dependent definitions for DL of the
+|             mobile station
+|
+|             Use this header for definitions to integrate the
+|             protocol stack entity DL in your target system !
++-----------------------------------------------------------------------------
+*/
+
+#ifndef CUS_DL_H
+#define CUS_DL_H
+
+/*==== CONSTANTS ==================================================*/
+/*
+ * TIMER_VALUES
+ *
+ * Description :  The constants define the timer values
+ *                for the DL timer T200 depending on the various
+ *                channel types and service access point identifiers.
+ *                Value 1 means timeout, Value 0 means timer is stopped
+ */
+
+#define T200_ACTIVE   2
+#define T200_EXPIRED  1
+#define T200_STOPPED  0
+
+#define T200_SDCCH_SAPI_0_CNT     (T200_EXPIRED + 1)
+#define T200_FACCH_SAPI_0_CNT_FR  (T200_EXPIRED + 9)
+#define T200_FACCH_SAPI_0_CNT_HR  (T200_EXPIRED + 5)
+#define T200_SDCCH_SAPI_3_CNT     (T200_EXPIRED + 3)
+#define T200_SACCH_SAPI_3_CNT     (T200_EXPIRED + 4)
+
+
+/*
+ * PRIMITIVE SIZES
+ *
+ * Description :  The primitive size of PH_DATA_REQ depends on the
+ *                used channel. It is defined separately to achieve
+ *                an optimum of transmitted bytes to physical layer.
+ *                The default value which is defined here is calculated
+ *                without any alignment bits.
+ *                E.g. SACCH   N201        =  18
+ *                             l1 header   =   2
+ *                             l2 header   =   3
+ *                             sdu offset  =   2
+ *                             sdu length  =   2
+ *                             ch_type     =   1
+ *                             dummy       =   1
+ *                             -----------------
+ *                             total       =  29
+ *
+ */
+
+#define SACCH_PRIM_SIZE     29
+#define SDCCH_PRIM_SIZE     29
+#define FACCH_PRIM_SIZE     29
+
+
+/*
+ * MAX_QUEUED_MESSAGES
+ *
+ * Description :  The constant define the maximum number of
+ *                stored layer 3 messages in data link layer.
+ */
+
+#define MAX_QUEUED_MESSAGES    10
+
+/*
+ * VERSION
+ *
+ * Description :  The constants define the type and the value
+ *                of a version identification. The version
+ *                is part of the monitor struct.
+ */
+
+#define T_VERSION   char
+#define VERSION_DL  "DL 1.0"
+
+/*
+ * VSI_CALLER
+ *
+ * Description :  For multithread applications the constant VSI_CALLER
+ *                must be defined to identify the calling thread of the
+ *                VSI-Interface. This must be done correponding to the
+ *                type of T_VSI_CALLER in VSI.H. The comma symbol is
+ *                neccessary because the vsi-functions are called
+ *                like this vsi_xxx (VSI_CALLER par2, par3 ...)
+ */
+#if defined (NEW_FRAME)
+#define VSI_CALLER dl_handle,
+#define VSI_CALLER_SINGLE dl_handle
+#else
+#ifdef OPTION_MULTITHREAD
+#define VSI_CALLER DL_NAME,
+#define VSI_CALLER_SINGLE DL_NAME
+#else
+#define VSI_CALLER
+#define VSI_CALLER_SINGLE
+#endif
+#endif
+#endif
+