diff gsm-fw/g23m-gsm/rr/cus_rr.h @ 673:2f7df7a314f8

gsm-fw/g23m-gsm subtree: initial import from LoCosto source
author Michael Spacefalcon <msokolov@ivan.Harhan.ORG>
date Sun, 28 Sep 2014 23:20:04 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/g23m-gsm/rr/cus_rr.h	Sun Sep 28 23:20:04 2014 +0000
@@ -0,0 +1,219 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :
+|  Modul   :
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  Custom dependent definitions for RR of the
+|             mobile station
++-----------------------------------------------------------------------------
+*/
+
+#ifndef CUS_RR_H
+#define CUS_RR_H
+
+/*==== CONSTANTS ==================================================*/
+/*
+ * TIMER_VALUES
+ *
+ * Description :  The constants define the timer values
+ *                for the RR timer TXXX depending on the various
+ *                channel types and service access point identifiers.
+ *                If your target system uses other units please
+ *                change the values.
+ */
+
+/*
+ * all values in milliseconds independent from the target
+ */
+#define TRESELECT_VALUE         10000
+#define TABORT_VALUE            10000
+#define T3110_VALUE             500
+#define T3110_SDCCH_VALUE       900
+#define T3126_VALUE             2500
+#define T3122_VALUE(a)          (1000*(a))
+#define T_PLMN_SEARCH_VALUE     60000
+
+/* CSI-LLD section:4.1.3.2  
+ * Search mode timer values in seconds
+ */
+#define TFAST_CS_VALUE          240000
+#define TNORMAL_CS_VALUE        240000 
+
+
+#define ONE_SEC                 1000
+#define TEN_SEC                 10000
+#define TWENTY_SEC              20000
+#define THIRTY_SEC              30000
+#define SIXTY_SEC               60000
+#define TWO_MIN                 120000
+#define SIX_MIN                 360000
+
+#ifdef TI_PS_FF_AT_P_CMD_CTREG
+#define T_TEN_SEC                 1
+#define T_TWENTY_SEC              2
+#define T_THIRTY_SEC              3
+#define T_SIXTY_SEC               6
+#define T_TWO_MIN                 12
+#define T_SIX_MIN                 36
+#endif /* TI_PS_FF_AT_P_CMD_CTREG */
+/*
+ * TIMER IDENTIFIER
+ *
+ * Description :  The constants define the identifier of the
+ *                timer resources of RR.
+ */
+
+#define FOUR_FRAMES             4
+
+#define T3110_NAME     "T3110"
+#define T3122_NAME     "T3122"
+#define T3126_NAME     "T3126"
+#define TRESELECT_NAME "TRESELECT"
+#define TREG_NAME      "TREG"
+#define TABORT_NAME    "TABORT"
+
+/*
+ * MAX_RR_TIMER
+ *
+ * Description :  The constant define the number of timer
+ *                available in the timer pool.
+ */
+
+#define MAX_RR_TIMER 6
+
+/*
+ * PERIODS OF MEASUREMENT REPORTS
+ *
+ * Description :  The constants defines the time between
+ *                measurement reports in idle or dedicated
+ *                mode as a multiple of 480 ms.
+ */
+#define PERIODS_OF_480MS_DEDICATED 1
+#define PERIODS_OF_480MS_IDLE      2
+
+/*
+ * MEDIUM_RXLEV_THRESHOLD
+ *
+ * Description :  The constant defines the RxLev threshold for reasonably
+ *                strong carriers
+ */
+
+#define MEDIUM_RXLEV_THRESHOLD   10
+
+/*
+ * UPPER_RXLEV_THRESHOLD
+ *
+ * Description :  The constant defines the Upper RxLev threshold for
+ *                strong carriers
+ */
+
+#define UPPER_RXLEV_THRESHOLD   20
+
+/*
+ * MAX_LAI
+ *
+ * Description :  The constant defines the length of the forbidden
+ *                LAI list.
+ */
+
+#define MAX_LAI   10
+
+/*
+ * MAX_RR_STORED_PRIM
+ *
+ * Description :  The constant defines the number of primitives stored
+ *                in radio resource in parallel.
+ */
+
+
+/*
+ * DG 1.8.2000
+ * #define MAX_RR_STORED_PRIM 5
+ * Forum G23M-0087, more than 5 prims to store
+ */
+
+#define MAX_RR_STORED_PRIM 10
+
+
+/*
+ * FRAME_OFFSET_ZERO
+ *
+ * Description :  If the system ensures that the frame offset
+ *                for RR message is 24 bits, that means DL
+ *                start at offset zero, this option can be used
+ *                for an optimized access to the SDU.
+ */
+
+#undef FRAME_OFFSET_ZERO
+
+/*
+ * C1 OFFSET
+ *
+ * Description :  If no test sim card is inserted, this offset
+ *                is added to the calculated c1 value. This
+ *                ensures coverage for mobiles with a RF
+ *                at the lower border of sensitivity.
+ */
+
+#define C1_OFFSET    4
+
+/*
+ * DELAY BEFORE RESET IN CASE NO CONFIGURATION DATA AVAILABLE
+ *
+ * Description :  At system start the software tries to read configuration
+ *                data from the flash [file system (FFS)] to allow behaviour
+ *                fitting to a customer's configuration, e.g. in terms of
+ *                HW suport (supported frequency bands, power class etc...)
+ *                If no such data can be found the system will reset after
+ *                the dalay specified below (unit is milliseconds). A customer
+ *                might use this time to download the configuration to the
+ *                flash.
+ *                Introduced with ConQuest Issue 7510, project G23M.
+ */
+
+#define DELAY_RESET_NO_CONFIG_DATA 30000
+
+/*
+ * DELAY BETWEEN NON PARALLEL SEARCH IN LIMITED SERVICE IN ALL FREQ AREA
+ *
+ * Description :  When MS enters Limited Service in all freqqurncy are, 
+ *                Non Parallel search must be used to get back to Full Service.
+ *                The following constant identifies the time gap between Non 
+ *                Parallel search attempts in such a situation following TREG 
+ *                timer expiry. This time gap is used to allow time for emegency
+ *                calls to the user. 
+ */
+
+#define DELAY_NON_PAR_SEARCH_LIM_SER TWO_MIN
+
+ /*
+ * VSI_CALLER
+ *
+ * Description :  For multithread applications the constant VSI_CALLER
+ *                must be defined to identify the calling thread of the
+ *                VSI-Interface. This must be done correponding to the
+ *                type of T_VSI_CALLER in VSI.H. The comma symbol is
+ *                neccessary because the vsi-functions are called
+ *                like this vsi_xxx (VSI_CALLER par2, par3 ...)
+ */
+
+#ifdef OPTION_MULTITHREAD
+#define VSI_CALLER rr_handle,
+#define VSI_CALLER_SINGLE rr_handle
+#else
+#define VSI_CALLER
+#define VSI_CALLER_SINGLE
+#endif
+
+#endif