--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/bsp/rtc/rtc_config.h	Sun Nov 17 22:10:10 2013 +0000
@@ -0,0 +1,100 @@
+/********************************************************************************/
+/*                                                                              */
+/*      File Name:   rtc_config.h                                               */
+/*                                                                              */
+/*      Purpose:   This file contains adresses for RTC register access.         */
+/*                 and defined value                                            */
+/*                                                                              */
+/*      Note:      None.                                                        */
+/*                                                                              */
+/*      Revision History:                                                       */
+/*      05/31/01   Laurent Sollier      Create.                                 */
+/*                                                                              */
+/*   (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved  */
+/*                                                                              */
+/********************************************************************************/
+
+#ifndef _RTC_CONFIG_H_
+#define _RTC_CONFIG_H_
+
+#ifndef _WINDOWS
+	#include "chipset.cfg"
+#endif
+
+
+#include "memif/mem.h" 
+#include "rv/general.h"
+
+
+
+/* FOR ULYSSE AND CALYPSO CHIP */
+#define RTC_SECONDS_REG			(UINT8 *)(RTC_XIO_START)				/* Seconds register */
+#define RTC_MINUTES_REG			((UINT8 *)(RTC_XIO_START) +  0x01)		/* Minutes register */
+#define RTC_HOURS_REG			((UINT8 *)(RTC_XIO_START) +  0x02)		/* Hours register */
+#define RTC_DAYS_REG				((UINT8 *)(RTC_XIO_START) +  0x03)		/* Days register */
+#define RTC_MONTHS_REG			((UINT8 *)(RTC_XIO_START) +  0x04)		/* Months register */
+#define RTC_YEARS_REG			((UINT8 *)(RTC_XIO_START) +  0x05)		/* Years register */
+#define RTC_WEEK_REG				((UINT8 *)(RTC_XIO_START) +  0x06)		/* Week register */
+#define RTC_ALARM_SECONDS_REG	((UINT8 *)(RTC_XIO_START) + 0x08) /* Alarms seconds register */
+#define RTC_ALARM_MINUTES_REG	((UINT8 *)(RTC_XIO_START) + 0x09)	/* Alarms minutes register */
+#define RTC_ALARM_HOURS_REG	((UINT8 *)(RTC_XIO_START) + 0x0A)	/* Alarms hours register */
+#define RTC_ALARM_DAYS_REG		((UINT8 *)(RTC_XIO_START) + 0x0B)	/* Alarms days register */
+#define RTC_ALARM_MONTHS_REG	((UINT8 *)(RTC_XIO_START) + 0x0C)	/* Alarms months register */
+#define RTC_ALARM_YEARS_REG	((UINT8 *)(RTC_XIO_START) + 0x0D) /* Alarms years register */
+#define RTC_CTRL_REG				((UINT8 *)(RTC_XIO_START) + 0x10) /* Control register */
+#define RTC_STATUS_REG			((UINT8 *)(RTC_XIO_START) + 0x11) /* Status register */
+#define RTC_INTERRUPTS_REG		((UINT8 *)(RTC_XIO_START) + 0x12) /* Interrupts register */
+#define RTC_COMP_LSB_REG		((UINT8 *)(RTC_XIO_START) + 0x13) /* LSB compensation register */
+#define RTC_COMP_MSB_REG		((UINT8 *)(RTC_XIO_START) + 0x14) /* MSB compensation register */
+
+/* RTC Control register description */
+
+#define RTC_START_RTC		0x0001	/* 1 => RTC is running */
+#define RTC_ROUND_30S		0x0002	/* Time rounded to the closest minute */
+#define RTC_AUTO_COMP		0x0004	/* Auto compensation enabled or not */
+#define RTC_MODE_12_24		0x0008	/* 12 hours mode*/
+#define RTC_TEST_MODE		0x0010	/* Test mode */
+#define RTC_SET_32_COUNTER	0x0020 	/* set 32 KHz counter with comp_reg */
+#if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11))
+	#define RTC_nDELTA_OMEGA 0x0040  /* Analog Baseband Type */
+#endif
+
+
+/* RTC Interrupt register description */
+
+#define RTC_EVERY		0x0003		/* Define period of periodic interrupt
+												(second, minute, hour, day) */
+#define RTC_IT_TIMER	0x0004		/* Enable periodic interrupt */
+#define RTC_IT_ALARM	0x0008		/* Alarm interrupt enabled or not */	
+
+/* RTC Status register description */
+
+#define RTC_BUSY		0x0001
+#define RTC_RUN		0x0002		/* RTC is running */
+#define RTC_1S_EVENT	0x0004		/* One second has occured */
+#define RTC_1M_EVENT 0x0008		/* One minute has occured */
+#define RTC_1H_EVENT	0x0010		/* One hour has occured */
+#define RTC_1D_EVENT	0x0020		/* One day has occrued */
+#define RTC_ALARM		0x0040		/* Alarm interrupt has been generated */
+#define RTC_POWER_UP	0x0080		/* Indicates that a reset occured */
+
+#define RTC_EVERY_SEC	0x0000
+#define RTC_EVERY_MIN  	0x0001
+#define RTC_EVERY_HR		0x0002
+#define RTC_EVERY_DAY	0x0003
+
+/* 32 Khz and HF clock definition */
+#define RTC_CLOCK_32K 32768.0
+
+	/* HF clock definition */
+#if ((CHIPSET == 3) || (CHIPSET == 5) || (CHIPSET == 6))
+	#define RTC_CLOCK_HF 65000000.0
+#elif ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8))
+	#define RTC_CLOCK_HF 78000000.0
+#elif ((CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+	#define RTC_CLOCK_HF 104000000.0
+#endif
+
+
+
+#endif /* #ifndef _RTC_CONFIG_H_ */