FreeCalypso > hg > freecalypso-sw
diff gsm-fw/services/dar/dar_api.c @ 305:4dccc9d3305f
gsm-fw: checking in DAR from Leonardo source
| author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
|---|---|
| date | Sun, 16 Mar 2014 05:48:58 +0000 |
| parents | |
| children | 749ca89741fa |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/gsm-fw/services/dar/dar_api.c Sun Mar 16 05:48:58 2014 +0000 @@ -0,0 +1,789 @@ +/****************************************************************************/ +/* */ +/* File Name: dar_api.c */ +/* */ +/* Purpose: This file contains all the functions used to service */ +/* primitives. */ +/* */ +/* Version 0.1 */ +/* */ +/* Date Modification */ +/* ---------------------------------------------------------------------- */ +/* 2 October 2001 Create */ +/* */ +/* Author - Stephanie Gerthoux */ +/* */ +/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ +/****************************************************************************/ + +#include "rv/rv_defined_swe.h" + + +#ifdef RVM_DAR_SWE + #ifndef _WINDOWS + #include "swconfig.cfg" + #include "sys.cfg" + #include "l1sw.cfg" + #include "chipset.cfg" + #endif + + #include "abb/abb.h" + #include "rv/rv_general.h" + #include "rvm/rvm_gen.h" + #include "dar/dar_api.h" + #include "dar/dar_env.h" + #include "dar/dar_error_hdlr_i.h" + #include "dar/dar_messages_i.h" + #include "dar/dar_msg_ft.h" + #include "dar/dar_macro_i.h" + #include "dar/dar_diagnose_i.h" + #include "dar/dar_const_i.h" + #include "dar/dar_emergency.h" + + + #ifndef _WINDOWS + /* enable the timer */ + #include "memif/mem.h" + #include "timer/timer.h" + #include "inth/iq.h" + #if (CHIPSET == 12) + #include "inth/sys_inth.h" + #endif + #endif + + + /**** Global variable ****/ + /* Define load timer */ + static UINT16 dar_load_tim = 0x0; + + /* Increment variable */ + static BOOLEAN dar_increment = TRUE; + + /* DAR previous status */ + T_DAR_RECOVERY_STATUS dar_previous_status; + + /* DAR previous exception*/ + UINT8 dar_previous_exception; + + /**** Define extern variables ****/ + /* Get the status of the system */ + extern T_DAR_RECOVERY_STATUS dar_current_status; + + /* dar_exception_status : to get the status of the exception */ + extern UINT8 dar_exception_status; + + /* Define the recovery buffer */ + extern UINT8 dar_recovery_buffer[DAR_RECOVERY_DATA_MAX_BUFFER_SIZE]; + + /* Define a pointer to the Global Environment Control block */ + extern T_DAR_ENV_CTRL_BLK *dar_gbl_var_p; + + /* **************************************************************************** */ + /* RECOVERY */ + /* **************************************************************************** */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_recovery_get_status */ + /* */ + /* Purpose: This function is called by the MMI at the beginning of the */ + /* procedure, in order to get the status of the last reset of */ + /* the system. */ + /* */ + /* Input Parameters: */ + /* Dar recovery status */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_recovery_get_status(T_DAR_RECOVERY_STATUS* status) + { + /* Variable to know the status of th Omega VRPC register */ + UINT16 dar_pwr_status; + + *status = dar_previous_status; + switch (dar_previous_status) + { + case (DAR_WATCHDOG): + { + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = WATCHDOG",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + case (DAR_NORMAL_SCUTTLING): + { + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = NORMAL SCUTTLING",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + case (DAR_EMERGENCY_SCUTTLING): + { + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = EMERGENCY SCUTTLING",RV_TRACE_LEVEL_DEBUG_HIGH); + switch (dar_previous_exception) + { + case (DAR_EXCEPTION_DATA_ABORT): + { + DAR_SEND_TRACE(" A DATA ABORT exception has occured",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + + case (DAR_EXCEPTION_PREFETCH_ABORT): + { + DAR_SEND_TRACE(" A PREFETCH ABORT exception has occured",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + + case (DAR_EXCEPTION_UNDEFINED): + { + DAR_SEND_TRACE(" A UNDEFINED INSTRUCTION exception has occured",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + + case (DAR_EXCEPTION_SWI): + { + DAR_SEND_TRACE(" A SWI exception has occured",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + + case (DAR_EXCEPTION_RESERVED): + { + DAR_SEND_TRACE(" A RESERVED exception has occured",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + + default: + { + DAR_SEND_TRACE(" An error has been detected",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + + } + + break; + } + default: + { + #if (_GSM==1) || (defined _WINDOWS) + dar_pwr_status = ABB_Read_Status(); + + #if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) + if (dar_pwr_status & ONBSTS) + #elif (ANLG_FAM == 3) + if (dar_pwr_status & PWONBSTS) + #endif + { + /* Switch on Condition on ON BUTTON Push */ + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = POWER ON/OFF",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + else + { + /* Branch to a reset at adress 0 */ + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = BRANCH to adress 0",RV_TRACE_LEVEL_DEBUG_HIGH); + break; + } + #else + /* the SPI is not available in BOARD_TEST configuration */ + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = POWER ON/OFF or BRANCH to adress 0",RV_TRACE_LEVEL_DEBUG_HIGH); + #endif + } + }/* switch */ + + return(RV_OK); + + } /* dar_recovery_get_status */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_recovery_config */ + /* */ + /* Purpose: This function is used to store a callback function that will be */ + /* called by the recovery system when a recovery procedure has */ + /* been initiated */ + /* */ + /* Input Parameters: */ + /* dar callback function */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_recovery_config(T_RV_RET (*dar_store_recovery_data) + (T_DAR_BUFFER buffer_p, + UINT16 length)) + { + /* call the callback function */ + dar_gbl_var_p->entity_dar_callback = dar_store_recovery_data; + + return(RV_OK); + } /* dar_recovery_config */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_get_recovery_data */ + /* */ + /* Purpose: This function is used to retrieve data that have been stored */ + /* in the buffer just before a reset. */ + /* */ + /* Input Parameters: */ + /* - the buffer in whom important data have been stored before the reset */ + /* - the length of the buffer */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_get_recovery_data( T_DAR_BUFFER buffer_p, UINT16 length ) + { + /* Local variables */ + UINT8 i; + + if (buffer_p != NULL) + { + if(length <= DAR_RECOVERY_DATA_MAX_BUFFER_SIZE) + { + /* Retrieve data that have been stored in the global buffer */ + for(i=0;i<length;i++) + { + buffer_p[i] = dar_recovery_buffer[i]; + } + } + + else + /* the lenth is longer than DAR_RECOVERY_DATA_MAX_BUFFER_SIZE */ + { + /* So retrieve "DAR_RECOVERY_DATA_MAX_BUFFER_SIZE" data that have been stored */ + /* in the global buffer, the other data (length -"DAR_RECOVERY_DATA_MAX_BUFFER_SIZE") */ + /* are lost*/ + for(i=0;i<DAR_RECOVERY_DATA_MAX_BUFFER_SIZE;i++) + { + buffer_p[i] = dar_recovery_buffer[i]; + } + + DAR_SEND_TRACE_PARAM("Bytes nb that haven't be saved due to not enough memory space ",(DAR_RECOVERY_DATA_MAX_BUFFER_SIZE-length),DAR_WARNING); + } + } /* if (buffer_p != NULL) */ + + return(RV_OK); + + } /* dar_get_recovery_data */ + + + /* **************************************************************************** */ + /* WATCHDOG */ + /* **************************************************************************** */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_start_watchdog_timer */ + /* */ + /* Purpose: This function uses the timer as a general purpose timer instead */ + /* of Watchdog. It loads the timer , starts it and then unmasks */ + /* the interrupt. */ + /* */ + /* Input Parameters: */ + /* time's interval in milliseconds before the timer expires */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_start_watchdog_timer(UINT16 timer_expiration_value) + { + DAR_SEND_TRACE("DAR Watchdog timer",RV_TRACE_LEVEL_DEBUG_LOW); + + /* use Watchdog timer set as a general purpose timer */ + /* Calculate the load value thanks to the formula: */ + /* timer_expiration_value * 1000 = Tclk * (DAR_LOAD_TIM+1)*2^(PTV+1)*/ + /* (in Watchdog mode, the value of PTV is fixed to 7) */ + dar_load_tim = ((timer_expiration_value * 1000)/(1.078*256))-1; + + #ifndef _WINDOWS + /* Load "dar_load_tim" value */ + TIMER_WriteValue(dar_load_tim); + + /* Start timer with PTV = 7, no autoreload, free = 0 */ + *(volatile UINT16*)TIMER_CNTL_REG = 0x0E80; + + /* Unmask IRQ0 */ + #if (CHIPSET == 12) + F_INTH_ENABLE_ONE_IT(C_INTH_WATCHDOG_IT); + #else + IQ_Unmask(IQ_WATCHDOG); + #endif + #endif + + return(RV_OK); + + } /* dar_start_watchdog_timer */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_reload_watchdog_timer */ + /* */ + /* Purpose: This function is used to maintain the timer in reloading it */ + /* periodically before it expires */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_reload_watchdog_timer() + { + #ifndef _WINDOWS + + DAR_SEND_TRACE("Reload Watchdog ",RV_TRACE_LEVEL_DEBUG_LOW); + + /* Stop the timer */ + *(volatile UINT16*)TIMER_CNTL_REG = 0x0E00; + + /* Reload the timer with a different value each time */ + if (dar_increment == TRUE) + { + TIMER_WriteValue(++dar_load_tim); + dar_increment = FALSE; + } + else + { + TIMER_WriteValue(--dar_load_tim); + dar_increment = TRUE; + } + + /* Restart timer with PTV = 7, no autoreload, free = 0 */ + *(volatile UINT16*)TIMER_CNTL_REG = 0x0E80; + #endif + + return(RV_OK); + + } /* dar_reload_watchdog_timer */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_stop_watchdog_timer */ + /* */ + /* Purpose: This function stops the timer used as a general purpose timer */ + /* instead of watchdog */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_stop_watchdog_timer() + { + #ifndef _WINDOWS + /* Stop the timer */ + *(volatile UINT16*)TIMER_CNTL_REG = 0x0E00; + + /* Mask IRQ0 */ + #if (CHIPSET == 12) + F_INTH_DISABLE_ONE_IT(C_INTH_WATCHDOG_IT); + #else + IQ_Mask(IQ_WATCHDOG); + #endif + #endif + + return(RV_OK); + + } /* dar_stop_watchdog_timer */ + + + /* **************************************************************************** */ + /* RESET */ + /* **************************************************************************** */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_reset_system */ + /* */ + /* Purpose: This function can be used to reset the system voluntarily */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_reset_system(void) + { + + /* Update the DAR recovery status */ + dar_current_status = DAR_NORMAL_SCUTTLING; + + /* Call the MMI callback function to save some parameters before reset */ + dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer,DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); + + /* Send a trace before the reset of the system */ + DAR_SEND_TRACE("Voluntary reset of the system",RV_TRACE_LEVEL_DEBUG_HIGH); + + dar_reset(); + + return(RV_OK); + } + + /* **************************************************************************** */ + /* DIAGNOSE */ + /* **************************************************************************** */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_diagnose_swe_filter */ + /* */ + /* Purpose: This function is called to configure the Diagnose filtering. */ + /* It allows to determine what Software Entity ( dar_use_id ) */ + /* wants to use the Diagnose and allows to indicate the level */ + /* threshold of the diagnose messages. (Warning or Debug) */ + /* */ + /* Input Parameters: */ + /* - the dar use id */ + /* - the dar level */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* */ + /* Note: */ + /* None */ + /* */ + /********************************************************************************/ + + T_RV_RET dar_diagnose_swe_filter ( T_RVM_USE_ID dar_use_id, + T_DAR_LEVEL dar_level) + { + /* Declare local variables */ + T_RVF_MB_STATUS mb_status = RVF_GREEN; + T_DAR_FILTER_START *use_id_p = NULL; + + /************************** dar_diagnose_swe_filter function ***************/ + + if (dar_gbl_var_p == NULL ) + { + dar_error_trace(DAR_ENTITY_NOT_START); + return(RV_NOT_READY); + } + + /* allocate the memory for the message to send */ + mb_status = rvf_get_buf (dar_gbl_var_p->mb_dar, + sizeof (T_DAR_FILTER_START), + (T_RVF_BUFFER **) (&use_id_p)); + + /* If insufficient resources, then report a memory error and abort. */ + if (mb_status == RVF_YELLOW) + { + /* deallocate the memory */ + rvf_free_buf((T_RVF_BUFFER *)use_id_p); + dar_error_trace(DAR_ENTITY_NO_MEMORY); + return (RV_NOT_SUPPORTED); + } + else + if (mb_status == RVF_RED) + { + dar_error_trace(DAR_ENTITY_NO_MEMORY); + return (RV_MEMORY_ERR); + } + + /* fill the message id */ + use_id_p ->os_hdr.msg_id = DAR_FILTER_REQ; + + /* fill the addr source id */ + use_id_p->os_hdr.src_addr_id = dar_gbl_var_p->addrId; + + /* fill the message parameters (group, mask and level) */ + use_id_p->use_msg_parameter.group_nb = (dar_use_id>>16)& 0x7FFF; + use_id_p->use_msg_parameter.mask = (dar_use_id)&0xFFFF; + use_id_p->use_msg_parameter.level = dar_level; + + /* send the messsage to the DAR entity */ + rvf_send_msg (dar_gbl_var_p->addrId, + use_id_p); + + return (RV_OK); + + + } /* dar_diagnose_swe_filter */ + + /********************************************************************************/ + /* */ + /* Function Name: dar_diagnose_write */ + /* */ + /* Purpose: This function is called to store diagnose data in RAM buffer */ + /* */ + /* */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, ( the Binary format is not supported) */ + /* Data level, */ + /* Data Use Id, */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_diagnose_write( T_DAR_INFO *buffer_p, + T_DAR_FORMAT format, + T_DAR_LEVEL diagnose_info_level, + T_RVM_USE_ID dar_use_id) + { + /* Declare local variables */ + UINT8 index =0 ; /* local index */ + + /* Check if the dar_use_id group_nb exists */ + /* If the group exists... */ + if(dar_search_group((dar_use_id>>16)& 0x7FFF,&index) == RV_OK) + { + /* Check the Dar level */ + switch(diagnose_info_level) + { + case DAR_WARNING: + { + /* The DAR entity wants to process Warning messages */ + /* check if the mask_warning is in the dar_filter array */ + if (((dar_gbl_var_p ->dar_filter_array[index].mask_warning) + & ((dar_use_id)&0xFFFF)) !=0) + { + /* The Warning messages must be diagnosed */ + dar_send_write_data( buffer_p, format, diagnose_info_level, dar_use_id); + } + + else + { + /* There is no mask_warning for this use_id in the dar_filter array */ + /* The warning messages can't be diagnosed */ + DAR_TRACE_WARNING("The Warning messages can't be diagnosed"); + } + + break; + } /* case DAR_WARNING */ + + case DAR_DEBUG: + { + /* The DAR entity wants to process Debug messages */ + /* Check if the mask_debug is in the dar_filter array */ + + if (((dar_gbl_var_p ->dar_filter_array[index].mask_debug) + & ((dar_use_id)&0xFFFF)) !=0) + { + /* The Debug messages must be diagnosed */ + dar_send_write_data( buffer_p, format, diagnose_info_level, dar_use_id); + } + + else + { + /* There is no mask_debug for this use_id in the dar_filter array */ + /* The debug messages can't be diagnosed */ + DAR_TRACE_WARNING("The Debug messages can't be diagnosed"); + } + break; + } /* case DAR_DEBUG */ + + default: + { + /* Unknow level has been received */ + DAR_TRACE_WARNING("A DAR unknow level has been received "); + break; + } + } /* switch(msg_p->use_msg_parameter.level) */ + } /* if (search_group(dar_use_id.group_nb,&index)== RV_OK) */ + + else + { + /* An unknow group message has been received */ + DAR_TRACE_WARNING("A DAR unknow group level message has been received "); + } + + return (RV_OK); + } /* dar_diagnose_write */ + + + /********************************************************************************/ + /* */ + /* Function Name: dar_diagnose_generate_emergency */ + /* */ + /* Purpose: This function is called to store diagnose data in RAM buffer */ + /* when an emergency has been detected and goes to emergency */ + /* (automatic reset) */ + /* */ + /* */ + /* */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, ( the Binary format is not supported) */ + /* Data Use Id, */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_diagnose_generate_emergency( T_DAR_INFO *buffer_p, + T_DAR_FORMAT format, + T_RVM_USE_ID dar_use_id) + { + if (dar_gbl_var_p != NULL) + { + /* Process the diagnose emergency */ + dar_process_emergency(buffer_p, format, dar_use_id, DAR_EMERGENCY_RESET|DAR_NEW_ENTRY); + + return (RV_OK); + } + else + { + return (RV_NOT_READY); + } + + } /* dar_diagnose_write */ + + + /********************************************************************************/ + /* */ + /* Function Name: dar_diagnose_write_emergency */ + /* */ + /* Purpose: This function is called to store diagnose data in RAM buffer */ + /* when an emergency has been detected. Data is written directly */ + /* compared to dar_diagnode_write where data is sent to DAR */ + /* via messages. Depending on the passed flags a RESET will be */ + /* done. */ + /* */ + /* */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, ( the Binary format is not supported) */ + /* Data Use Id, */ + /* Flags */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /********************************************************************************/ + T_RV_RET dar_diagnose_write_emergency( T_DAR_INFO *buffer_p, + T_DAR_FORMAT format, + T_RVM_USE_ID dar_use_id, + UINT32 flags) + { + if (dar_gbl_var_p != NULL) + { + /* Process the diagnose emergency */ + dar_process_emergency(buffer_p, format, dar_use_id, flags); + + return (RV_OK); + } + else + { + return (RV_NOT_READY); + } + + } /* dar_diagnose_write_emergency */ + +#else + + /* ************************************************ */ + /* THE DAR ENTITY IS DISABLED */ + /* ************************************************ */ + + #include "rv/rv_general.h" + #include "rvm/rvm_gen.h" + #include "rvm/rvm_priorities.h" + #include "rvf/rvf_target.h" + #include "rvf/rvf_i.h" + #include "dar/dar_gen.h" + + T_RV_RET dar_diagnose_swe_filter ( T_RVM_USE_ID dar_use_id, + T_DAR_LEVEL dar_level) + { + return (RV_OK); + + } /* dar_diagnose_swe_filter */ + + + T_RV_RET dar_diagnose_write( T_DAR_INFO *buffer_p, + T_DAR_FORMAT format, + T_DAR_LEVEL diagnose_info_level, + T_RVM_USE_ID dar_use_id) + { + return (RV_OK); + + } /* dar_diagnose_write */ + + + + T_RV_RET dar_diagnose_generate_emergency( T_DAR_INFO *buffer_p, + T_DAR_FORMAT format, + T_RVM_USE_ID dar_use_id) + { + + return (RV_OK); + + } /* dar_diagnose_generate_emergency */ + + + T_RV_RET dar_diagnose_write_emergency( T_DAR_INFO *buffer_p, + T_DAR_FORMAT format, + T_RVM_USE_ID dar_use_id, + UINT32 flags) + { + return (RV_OK); + } /* dar_diagnose_write_emergency */ + + +#endif /* #ifdef RVM_DAR_SWE */