diff gsm-fw/g23m-glue/gdi/audio.c @ 831:549b7ac60300

gsm-fw/g23m-glue/gdi/*.c: import from Leonardo source
author Space Falcon <falcon@ivan.Harhan.ORG>
date Thu, 23 Apr 2015 06:42:53 +0000
parents
children 6c5d3fecbc67
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/g23m-glue/gdi/audio.c	Thu Apr 23 06:42:53 2015 +0000
@@ -0,0 +1,2153 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :  GSM-PS
+|  Modul   :  DRV_AUDIO
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  This Module defines the audio driver interface.
+|             for the G23 protocol stack.
+|
+|             This driver is used to control all audio and audio-related
+|             devices of the mobile such as speaker, microphone, etc.
+|             A device, e.g. a speaker, may have the capability to play
+|             sounds and/or melodies indirectly. This means a sound
+|             generator may be attached to a speaker or its amplifier.
+|             The format of the sound/melody images is implementation
+|             dependent and therefore not in the scope of the generic
+|             driver interface. Therefore a application may play pre-
+|             defined, driver specific sounds identifying them via a
+|             sound ID. In addition the API of this driver has foreseen
+|             that an application may copy a sound image into its local
+|             buffer, modify it and let it play by the driver. In this
+|             case the application has to have the knowledge about the
+|             sound image format.
++-----------------------------------------------------------------------------
+|  History :  
+|		  Apr 04, 2005    REF: ENH 30063 xdeepadh
+|		  Description: Buzzer removal activity for Locosto MMI
+|		  Fix:All the Buzzer related calls are under the  compilation flag FF_BUZZER.
+|			The GSM tones which were playing in the buzzer are now routed to the speaker(Audio).     
++-----------------------------------------------------------------------------
+	$History: 
+
+   	              
+ 	xpradipg - GSM-ENH-32494 : 23 June 2005
+ 	Description:	Support for various audio profiles
+ 	Solution:	The support for audio device's carkit/headset/loudspeaker/handheld.
+ 			The audio device is enabled as per the user actions.	
+
+	June 13, 2005	REF : GSM_ENH_32062 - xpradipg
+	Description:The audio uplink not working in the connected call
+	Solution:	The audio uplink was configured to mute state at initialization
+				The configuration is changed to be in unmute state
+
+	Apr 26, 2005   REF : CRR 30627 xpradipg
+	Bug :	Replace the ABB APIs with Audio Service APIs
+	Fix :	The ABB APIs are used in muting/unmuting and setting the volume of
+			the speaker and microphone. These ABB APIs are replaced with the 
+			audio serivce APIs	
+******************************************************************************/
+
+#ifndef DRV_AUDIO_C
+#define DRV_AUDIO_C
+#endif
+#define ENTITY_CST
+
+/*
+in order to stay backwardcompatible this riv_audio define is entered as only
+ti15++ version do have the riveria frame it needs to be disabled for the rest
+*/
+
+#if defined (ALR)
+#define RIV_AUDIO 1
+#else
+#undef RIV_AUDIO
+#endif
+
+#if defined (_SIMULATION_)
+#define _TTY_SIMU
+#endif
+
+/*==== INCLUDES ===================================================*/
+
+#include <string.h>
+#include "typedefs.h"
+#include "vsi.h"
+#include "custom.h"
+#ifdef ALR
+  #include "p_mphc.h"
+#elif defined(FF_GTI)
+  /* GTI*/
+  /* do nothing */
+#else
+  #include "p_mph5.h"
+#endif  /* ALR, FF_GTI */
+#include "prim.h"
+#include "gsm.h"
+#include "tok.h"
+#include "cst/cst.h"
+#include "cst/cus_cst.h"
+#include "gdi.h"
+#include "audio.h"
+
+#if defined (RIV_AUDIO)
+/* #include "bt_general.h" */
+#include "rv/rv_general.h"
+#if /*!defined (_TTY_SIMU) &&*/ defined (FF_TTY)
+#include "tty/tty_api.h"
+#endif
+#include "audio/audio_api.h"
+#endif
+
+/*==== DEFINE =====================================================*/
+
+#define AUDIO_TRC_EVENT(_f_)\
+        vsi_o_ttrace(VSI_CALLER TC_EVENT, _f_)
+#define AUDIO_TRC_EVENT_P1(_f_, _p_)\
+        vsi_o_ttrace(VSI_CALLER TC_EVENT, _f_, _p_)
+#define AUDIO_TRC_EVENT_P2(_f_, _p1_, _p2_)\
+        vsi_o_ttrace(VSI_CALLER TC_EVENT, _f_, _p1_, _p2_)
+#define AUDIO_TRC_FUNC(_f_)\
+        vsi_o_ttrace(VSI_CALLER TC_FUNC, _f_)
+#define AUDIO_TRC_FUNC_P1(_f_, _p_)\
+        vsi_o_ttrace(VSI_CALLER TC_FUNC, _f_, _p_)
+
+/*==== EXPORT =====================================================*/
+
+#if defined (NEW_FRAME)
+#define CST_AUDIOTIMER 2
+#endif
+
+/*==== VARIABLES ==================================================*/
+
+#if defined (RIV_AUDIO)
+static T_AUDIO_KEYBEEP_PARAMETER beep;
+static T_AUDIO_TONES_PARAMETER t;
+#endif
+
+drv_SignalCB_Type       audio_signal_callback = NULL;
+#if !defined (NEW_FRAME)
+T_VSI_THANDLE           audio_handle = VSI_ERROR;
+#endif
+T_ACT_TONE              act_tone;
+UBYTE                   act_speakerVolume;
+UBYTE                   act_micVolume;
+UBYTE                   act_buzVolume;
+UBYTE                   act_speakerMute;
+UBYTE                   act_micMute;
+
+#if defined (NEW_FRAME)
+EXTERN T_HANDLE  hCommL1;
+#else
+EXTERN T_VSI_CHANDLE  hCommL1;
+#endif
+
+#if defined (RIV_AUDIO)
+void audio_riv_audio_cb (void*);
+
+static T_RV_RETURN_PATH const riv_audio_rp =
+{
+  0, audio_riv_audio_cb
+};
+
+#ifdef FF_TTY
+T_AUDIO_TTY_CONFIG_PARAMETER static tty_cfg;
+UBYTE static tty_state = FALSE;
+UBYTE static tty_cmd = (UBYTE)TTY_OFF;
+
+
+char const * const audio_mode_names_tty[] = {
+  "default",
+  "tty_vco",
+  "tty_hco",
+  "tty_all"
+};
+#endif
+#endif
+
+UBYTE  audio_is_free = TRUE;  /* variable for disable no muting */
+
+/*==== FUNCTIONS ==================================================*/
+
+#if defined (_TMS470)
+
+EXTERN void BZ_Init          (void);
+EXTERN void BZ_Enable        (void);
+EXTERN void BZ_Disable       (void);
+EXTERN void BZ_Tone          (int f);
+EXTERN void BZ_Volume        (int v);
+
+#ifdef ALR
+EXTERN void ABB_DlVolume     (UBYTE v);
+EXTERN void ABB_DlMute       (UBYTE mute);
+EXTERN void ABB_UlMute       (UBYTE value);
+EXTERN void ABB_SideTone     (UBYTE v);
+/*#include "l1audio_abb.h"   does not work: there's no definition of types UWORDx */
+#else
+EXTERN void VG_UlVolume      (UBYTE v);
+EXTERN void VG_DlVolume      (UBYTE v);
+EXTERN void VG_DlMute        (UBYTE mute);
+EXTERN void VG_SideTone      (UBYTE v);
+#endif
+
+#else
+
+LOCAL  void BZ_Init          (void);
+LOCAL  void BZ_Enable        (void);
+LOCAL  void BZ_Disable       (void);
+LOCAL  void BZ_Tone          (int f);
+LOCAL  void BZ_Volume        (int v);
+
+#ifdef ALR
+LOCAL  void ABB_DlVolume     (UBYTE v);
+LOCAL  void ABB_DlMute       (UBYTE mute);
+LOCAL  void ABB_UlMute       (UBYTE value);
+LOCAL  void ABB_SideTone     (UBYTE v);
+#else
+LOCAL  void VG_UlVolume      (UBYTE v);
+LOCAL  void VG_DlVolume      (UBYTE v);
+LOCAL  void VG_DlMute        (UBYTE mute);
+LOCAL  void VG_SideTone      (UBYTE v);
+#endif
+
+#endif
+LOCAL  void audio_buzzer     (void);
+LOCAL  void audio_audio      (void);
+LOCAL  void audio_UlMute     (UBYTE mute);
+
+#if defined (RIV_AUDIO) AND !defined (_TTY_SIMU) AND defined (FF_TTY)
+LOCAL void audio_tty_return (void *tty_result);
+LOCAL void audio_save_def_return (void *result);
+LOCAL void audio_load_return (void *result);
+LOCAL void audio_dyn_load_return (void *result);
+#endif
+
+// 	xpradipg - GSM-ENH-32494 : 23 June 2005
+#ifdef FF_MMI_AUDIO_PROFILE
+typedef struct 
+{
+	int status;
+}T_AUDIO_MODE_LOAD_DONE;
+EXTERN T_AUDIO_RET	audio_mode_load (T_AUDIO_MODE_LOAD *p_parameter, T_RV_RETURN_PATH return_path);
+#endif
+/*==== CONSTANTS ==================================================*/
+
+#define BUZZER 0
+#define AUDIO  1
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+#ifdef FF_MMI_SERVICES_MIGRATION
+#define AUDIO_SIDE_TONE 175
+#endif
+
+#if defined (RIV_AUDIO)
+
+#define TDMA_12      12
+#define TDMA_23      23
+#define TDMA_43      43
+#define TDMA_71      71
+#define TDMA_108     108
+#define TDMA_130     130
+#define TDMA_216     216
+#define TDMA_650     650
+#define TDMA_866     866
+
+/*
+* with the original table spec (USHORT for Freq. and Ampl.),
+* we can go down to -31 dB only. Obviously this is sufficient
+* for all currently defined sounds.
+*/
+#define F_425  (( 425 << 5) + 7) /* (( 242 << 8 ) +  35) */
+#define F_697  (( 697 << 5) + 7) /* (( 219 << 8 ) +  56) */
+#define F_770  (( 770 << 5) + 7) /* (( 211 << 8 ) +  61) */
+#define F_852  (( 852 << 5) + 7) /* (( 201 << 8 ) +  67) */
+#define F_941  (( 941 << 5) + 7) /* (( 189 << 8 ) +  73) */
+#define F_1209 ((1209 << 5) + 5) /* (( 149 << 8 ) + 111) */
+#define F_1336 ((1336 << 5) + 5) /* (( 128 << 8 ) + 118) */
+#define F_1477 ((1477 << 5) + 5) /* (( 102 << 8 ) + 125) */
+#define F_1633 ((1633 << 5) + 5) /* ((  73 << 8 ) + 130) */
+
+#else /* (RIV_AUDIO) */
+
+#if defined (_TMS470)
+
+/*
+ * unit is TDMA frames
+ */
+#define TDMA_12      12
+#define TDMA_23      23
+#define TDMA_43      43
+#define TDMA_71      71
+#define TDMA_108     108
+#define TDMA_130     130
+#define TDMA_216     216
+#define TDMA_650     650
+#define TDMA_866     866
+
+
+#define F_425  (( 242 << 8) + 35)
+#define F_697  (( 219 << 8) + 56)
+#define F_770  (( 211 << 8) + 61)
+#define F_852  (( 201 << 8) + 67)
+#define F_941  (( 189 << 8) + 73)
+#define F_1209 (( 149 << 8) + 111)
+#define F_1336 (( 128 << 8) + 118)
+#define F_1477 (( 102 << 8) + 125)
+#define F_1633 (( 73  << 8) +  130)
+
+#else
+
+/*
+ * unit is milliseconds
+ */
+#define TDMA_12      55
+#define TDMA_23      100
+#define TDMA_43      200
+#define TDMA_71      330
+#define TDMA_108     500
+#define TDMA_130     650
+#define TDMA_216     1000
+#define TDMA_650     3000
+#define TDMA_866     4000
+
+#define F_425  (( 35 << 8) + 242)
+#define F_697  (( 56 << 8) + 219)
+#define F_770  (( 61 << 8) + 211)
+#define F_852  (( 67 << 8) + 201)
+#define F_941  (( 73 << 8) + 189)
+#define F_1209 ((111 << 8) + 149)
+#define F_1336 ((118 << 8) + 128)
+#define F_1477 ((125 << 8) + 102)
+#define F_1633 ((130 << 8) +  73)
+
+#endif
+
+#endif /* (RIV_AUDIO) */
+
+
+extern  const T_DESCR The_Ale_is_dear[111];
+extern  const T_DESCR Danza_de_Astureses[21];
+extern  const T_DESCR rising_chromatic[47];
+extern  const T_DESCR rising_cscale[27];
+extern  const T_DESCR MELODY_ONE[11];
+extern  const T_DESCR MELODY_HELLO[23];
+extern  const T_DESCR bugle[39];
+
+
+/*
+ * Tone generation tables
+ */
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+#ifndef FF_MMI_NO_BUZZER  //If Buzzer is available
+//ct_ring will be used for all the ringing tones.
+//When the buzzer is not available,midi ringer will be used to play the ringing tones.
+static const T_DESCR ct_ring []  =   /* command 1     command 2      length     */
+                      {    800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           800,          0,             TDMA_12,
+                           900,          0,             TDMA_12,
+                           0,            0,             TDMA_866,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+#endif
+static const T_DESCR ct_auth_num [] =   /* command 1     command 2      length     */
+                      {    950,          0,             TDMA_71,
+                          1400,          0,             TDMA_71,
+                          1800,          0,             TDMA_71,
+                             0,          0,             TDMA_216,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_busy []  =   /* command 1     command 2      length     */
+                      {    F_425,        0,             TDMA_108,
+                           0,            0,             TDMA_108,
+                           F_425,        0,             TDMA_108,
+                           0,            0,             TDMA_108,
+                           F_425,        0,             TDMA_108,
+                           0,            0,             TDMA_108,
+                           F_425,        0,             TDMA_108,
+                           0,            0,             TDMA_108,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_congest [] = /* command 1     command 2      length     */
+                      {    425,          0,             TDMA_43,
+                             0,          0,             TDMA_43,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dropped [] = /* command 1     command 2      length     */
+                      {    425,          0,             TDMA_43,
+                             0,          0,             TDMA_43,
+                           425,          0,             TDMA_43,
+                             0,          0,             TDMA_43,
+                           425,          0,             TDMA_43,
+                             0,          0,             TDMA_43,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_ack []     = /* command 1     command 2      length     */
+                      {    425,          0,             TDMA_43,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_cw []      = /* command 1     command 2      length     */
+                      {    F_425,        0,             TDMA_43,
+                           0,            0,             TDMA_130,
+                           F_425,        0,             TDMA_43,
+                           0,            0,             TDMA_650,
+                           F_425,        0,             TDMA_43,
+                           0,            0,             TDMA_130,
+                           F_425,        0,             TDMA_43,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_0 []  = /* command 1     command 2      length     */
+                      {    F_941,        F_1336,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_1 []  = /* command 1     command 2      length     */
+                      {    F_697,        F_1209,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_2 []  = /* command 1     command 2      length     */
+                      {    F_697,        F_1336,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_3 []  = /* command 1     command 2      length     */
+                      {    F_697,        F_1477,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_4 []  = /* command 1     command 2      length     */
+                      {    F_770,        F_1209,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_5 []  = /* command 1     command 2      length     */
+                      {    F_770,        F_1336,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_6 []  = /* command 1     command 2      length     */
+                      {    F_770,        F_1477,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_7 []  = /* command 1     command 2      length     */
+                      {    F_852,        F_1209,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_8 []  = /* command 1     command 2      length     */
+                      {    F_852,        F_1336,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_9 []  = /* command 1     command 2      length     */
+                      {    F_852,        F_1477,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_a []  = /* command 1     command 2      length     */
+                      {    F_697,        F_1633,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_b []  = /* command 1     command 2      length     */
+                      {    F_770,        F_1633,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+static const T_DESCR ct_dtmf_c []  = /* command 1     command 2      length     */
+                      {    F_852,        F_1633,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_d []  = /* command 1     command 2      length     */
+                      {    F_941,        F_1633,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_s []  = /* command 1     command 2      length     */
+                      {    F_941,        F_1209,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_dtmf_h []  = /* command 1     command 2      length     */
+                      {    F_941,        F_1477,        TDMA_23,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+/* keybeep not used at the moment */
+static const T_DESCR ct_keybeep []  = /* command 1     command 2      length     */
+                      {    F_697,        F_697,         TDMA_43,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+static const T_DESCR ct_ringing []  =   /* command 1     command 2      length     */
+                      {    F_425,        0,             TDMA_216,
+                           0,            0,             TDMA_866,
+                           0xFFFF,       0xFFFF,        0
+                      };
+
+/*
+ * Tone Type Table
+ */
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+ #ifndef FF_MMI_NO_BUZZER  //If Buzzer is available
+ //If Buzzer is available, ringing tones and gsm tones will be played in the buzzer.
+ //If the buzzer is not availble, the gsm tones will be routed to the speaker and
+ //the ringing tones will be played with midi ringer
+static const UBYTE  TONE_TYPE [] = {  BUZZER,     /* ringing tone 0             */
+                         BUZZER,     /* ringing tone 1             */
+                         BUZZER,     /* ringing tone 2             */
+                         BUZZER,     /* ringing tone 3             */
+                         BUZZER,     /* ringing tone 4             */
+                         BUZZER,     /* ringing tone 5             */
+                         BUZZER,     /* ringing tone 6             */
+                         BUZZER,     /* ringing tone 7             */
+                         BUZZER,     /* ringing tone 8             */
+                         BUZZER,     /* ringing tone 9             */
+                         BUZZER,     /* ringing tone 10            */
+                         BUZZER,     /* ringing tone 11            */
+                         BUZZER,     /* ringing tone 12            */
+                         BUZZER,     /* ringing tone 13            */
+                         BUZZER,     /* ringing tone 14            */
+                         BUZZER,     /* ringing tone 15            */
+                         BUZZER,     /* error/special information  */
+                         AUDIO,      /* subscriber busy            */
+                         BUZZER,     /* congestion                 */
+                         BUZZER,     /* call dropped               */
+                         BUZZER,     /* radio acknowledge          */
+                         AUDIO,      /* call waiting               */
+                         AUDIO,      /* DTMF digit 0               */
+                         AUDIO,      /* DTMF digit 1               */
+                         AUDIO,      /* DTMF digit 2               */
+                         AUDIO,      /* DTMF digit 3               */
+                         AUDIO,      /* DTMF digit 4               */
+                         AUDIO,      /* DTMF digit 5               */
+                         AUDIO,      /* DTMF digit 6               */
+                         AUDIO,      /* DTMF digit 7               */
+                         AUDIO,      /* DTMF digit 8               */
+                         AUDIO,      /* DTMF digit 9               */
+                         AUDIO,      /* DTMF digit A               */
+                         AUDIO,      /* DTMF digit B               */
+                         AUDIO,      /* DTMF digit C               */
+                         AUDIO,      /* DTMF digit D               */
+                         AUDIO,      /* DTMF digit *               */
+                         AUDIO,      /* DTMF digit #               */
+                         AUDIO,      /* keybeep                    */
+                         AUDIO       /* ringing tone if NOIBT      */
+                      };
+
+#endif
+
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+/*
+ * Tone Description Table
+    This table will have the  ringing tones and the  gsm tones.
+    When the buzzer is not available, the ringing tones will be played with midi ringer
+ */
+static const T_DESCR * const TONE_DESCR [] =
+                       { 
+#ifndef FF_MMI_NO_BUZZER
+			    ct_ring,    /* ringing tone 0             */
+                         ct_ring,    /* ringing tone 1             */
+                         ct_ring,    /* ringing tone 2             */
+                         ct_ring,    /* ringing tone 3             */
+                         ct_ring,    /* ringing tone 4             */
+                         ct_ring,    /* ringing tone 5             */
+                         ct_ring,    /* ringing tone 6             */
+                         ct_ring,    /* ringing tone 7             */
+                         ct_ring,    /* ringing tone 8             */
+                         ct_ring,    /* ringing tone 9             */
+                         ct_ring,    /* ringing tone 10            */
+                         ct_ring,    /* ringing tone 11            */
+                         ct_ring,    /* ringing tone 12            */
+                         ct_ring,    /* ringing tone 13            */
+                         ct_ring,    /* ringing tone 14            */
+                         ct_ring,    /* ringing tone 15            */
+#endif
+                         ct_auth_num,/* error/special information  */
+                         ct_busy,    /* subscriber busy            */
+                         ct_congest, /* congestion                 */
+                         ct_dropped, /* call dropped               */
+                         ct_ack,     /* radio acknowledge          */
+                         ct_cw,      /* call waiting               */
+                         ct_dtmf_0,  /* DTMF digit 0               */
+                         ct_dtmf_1,  /* DTMF digit 1               */
+                         ct_dtmf_2,  /* DTMF digit 2               */
+                         ct_dtmf_3,  /* DTMF digit 3               */
+                         ct_dtmf_4,  /* DTMF digit 4               */
+                         ct_dtmf_5,  /* DTMF digit 5               */
+                         ct_dtmf_6,  /* DTMF digit 6               */
+                         ct_dtmf_7,  /* DTMF digit 7               */
+                         ct_dtmf_8,  /* DTMF digit 8               */
+                         ct_dtmf_9,  /* DTMF digit 9               */
+                         ct_dtmf_a,  /* DTMF digit A               */
+                         ct_dtmf_b,  /* DTMF digit B               */
+                         ct_dtmf_c,  /* DTMF digit C               */
+                         ct_dtmf_d,  /* DTMF digit D               */
+                         ct_dtmf_s,  /* DTMF digit *               */
+                         ct_dtmf_h,  /* DTMF digit #               */
+                         ct_keybeep, /* dummy for keybeep          */
+                         ct_ringing  /* ringing tone if NIBT       */
+                      };
+
+
+/*==== CONSTANTS ==================================================*/
+
+
+
+// 	xpradipg - GSM-ENH-32494 : 23 June 2005
+#ifdef FF_MMI_AUDIO_PROFILE
+/*******************************************************************************
+ $Function:    	audio_mode_load_cb
+
+ $Description: callback function for the auido_mode_load()
+
+ $Returns:    	none
+
+ $Arguments:  status of the load operation
+
+*******************************************************************************/
+void audio_mode_load_cb(void *ret_param)
+{
+
+	//if((T_AUDIO_MODE_LOAD_DONE *)ret_param->status != AUDIO_OK)
+		AUDIO_TRC_FUNC("ERROR Loading the audio profile");
+}
+
+/*******************************************************************************
+ $Function:    	audio_full_access_write_cb()
+
+ $Description: callback function for the audio_full_access_write()
+
+ $Returns:    	none
+
+ $Arguments:  status of the write operation
+
+*******************************************************************************/
+void audio_full_access_write_cb(void *ret_param)
+{
+//	if( (T_AUDIO_FULL_ACCESS_WRITE_DONE *)ret_param->status != AUDIO_OK)
+		AUDIO_TRC_FUNC ("ERROR setting the value");
+}
+#if 0
+/*******************************************************************************
+ $Function:    	audio_speaker_volume_cb()
+
+ $Description: callback function for the audio_speaker_volume()
+
+ $Returns:    	none
+
+ $Arguments:  status of the speaker volume setting operation
+
+*******************************************************************************/
+void audio_speaker_volume_cb(ret_param)
+{
+	if((T_AUDIO_SPEAKER_VOLUME_DONE)ret_param->status != AUDIO_OK)
+		AUDIO_TRC_FUNC ("ERROR setting the volume");
+}
+#endif
+/*******************************************************************************
+ $Function:    	audio_set_device()
+
+ $Description: initiates the audio_mode_load() for various devices
+
+ $Returns:    	none
+
+ $Arguments:  successfull execution of the audio_mode_load operation
+
+*******************************************************************************/
+int audio_set_device(char* mode)
+{
+	T_RV_RETURN_PATH return_path = {0,audio_mode_load_cb};
+	T_AUDIO_RET status;
+	T_AUDIO_MODE_LOAD p_parameter;
+
+	strcpy((char*)p_parameter.audio_mode_filename,mode);
+	status = audio_mode_load(& p_parameter,return_path);
+	return status;
+
+}
+
+/*******************************************************************************
+ $Function:    	audio_set_path()
+
+ $Description: sets the audio speaker path to the current audio device and also either to voice or
+ 			stereo 
+
+ $Returns:    	none
+
+ $Arguments:  
+ 			audioDevice - Indicates the device to which the path has to be set
+ 			stereo - If false the path is for voice 
+ 				      If true the path is for stereo
+*******************************************************************************/
+
+void audio_set_path(int audioDevice,int stereo)
+{
+	T_RV_RETURN_PATH return_path = {0,audio_full_access_write_cb};
+	T_AUDIO_FULL_ACCESS_WRITE	p_parameter;
+	int status;	
+	if( stereo)
+		p_parameter.variable_indentifier = AUDIO_STEREO_SPEAKER_MODE;
+	else
+		p_parameter.variable_indentifier = AUDIO_SPEAKER_MODE;
+	p_parameter.data =  (void*)&audioDevice;
+	status = audio_full_access_write(&p_parameter,return_path);
+
+}
+#endif
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_Init                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : The function initializes the driver´s internal data.
+            The function returns DRV_OK in case of a successful
+            completition. The function returns DRV_INITIALIZED if
+            the driver has already been initialized and is ready to
+            be used or is already in use. In case of an initialization
+            failure, which means the that the driver cannot be used,
+            the function returns DRV_INITFAILURE.
+
+*/
+// 	xpradipg - GSM-ENH-32494 : 23 June 2005
+//	the interface for the audio profiles has changed, it accepts an array of 
+//   type T_ACCESSORY_CALLBACK
+#ifdef FF_MMI_AUDIO_PROFILE
+GLOBAL UBYTE audio_Init(T_ACCESSORY_CALLBACK *audioConfig)
+#else
+GLOBAL UBYTE audio_Init (drv_SignalCB_Type in_SignalCBPtr)
+#endif
+{
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	local variable declarations 
+#ifdef FF_MMI_SERVICES_MIGRATION
+	T_AUDIO_FULL_ACCESS_WRITE side_tone_cfg;
+	T_RV_RETURN_PATH return_path = {0, NULL};
+	T_AUDIO_RET result;
+	INT8 side_tone = AUDIO_SIDE_TONE;
+#endif	
+// 	xpradipg - GSM-ENH-32494 : 23 June 2005
+#ifdef FF_MMI_AUDIO_PROFILE
+T_AUDIO_RET status;
+T_AUDIO_MODE_LOAD handheld= {"handheld"};
+#endif
+
+// 	xpradipg - GSM-ENH-32494 : 23 June 2005
+//	the callback functions for the headset and carkit indication are registered 
+//	and the defualt mode handheld is loaded
+#ifdef FF_MMI_AUDIO_PROFILE
+#if 0
+	status = audio_accessory_register_notification(audioConfig[CALLBACK_HEADSET],AUDIO_ACCESSORY_HEADSET);
+	if( status != AUDIO_OK)
+	{
+		AUDIO_TRC_FUNC("Error - registering the callback for headset");
+	}
+	
+	status = audio_accessory_register_notification(audioConfig[CALLBACK_CARKIT],AUDIO_ACCESSORY_CARKIT);
+	if(status != AUDIO_OK)
+	{
+		AUDIO_TRC_FUNC("Error - registering the callback for carkit");
+	}
+#endif
+	return_path.callback_func = audio_mode_load_cb;
+	status = audio_mode_load(&handheld, return_path);
+	if (status != AUDIO_OK)
+	{
+		AUDIO_TRC_FUNC("Error - loading the handheld profile");
+	}
+#else
+  audio_signal_callback   = in_SignalCBPtr;     /* store call-back function */
+#endif
+
+#if !defined (NEW_FRAME)
+  audio_handle = vsi_t_open (VSI_CALLER "AUDIO");
+
+  if (audio_handle < VSI_OK)
+    return DRV_INITFAILURE;
+#endif
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//For Buzzer init 
+#ifndef FF_MMI_NO_BUZZER
+  BZ_Init ();             /* initialize buzzer */
+#endif
+  audio_SetMute  ( AUDIO_SPEAKER,    AUDIO_MUTING_OFF );
+  audio_SetMute  ( AUDIO_MICROPHONE, AUDIO_MUTING_OFF );
+
+  audio_SetAmplf ( AUDIO_SPEAKER,    175 );
+  audio_SetAmplf ( AUDIO_MICROPHONE, 75  );
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//Set volume for Buzzer
+#ifndef FF_MMI_NO_BUZZER
+  audio_SetAmplf ( AUDIO_BUZZER,     175 );
+#endif
+
+/* Setting the Side Tone has been moved from audio_SetAmplf CQ21055*/
+#ifdef ALR
+ #ifdef FF_TTY
+    if (!tty_state)
+ #endif
+    {
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	set the sidetone value to 175 this is the optimum value    
+#ifdef FF_MMI_SERVICES_MIGRATION
+    	side_tone_cfg.variable_indentifier = AUDIO_MICROPHONE_SPEAKER_LOOP_SIDETONE;
+    	side_tone_cfg.data = (void*)&side_tone;
+    	result = audio_full_access_write(&side_tone_cfg, return_path);
+#else    	
+	    ABB_SideTone (175);
+#endif	    
+    }
+#else
+     VG_SideTone (175); 
+#endif
+
+
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_Exit                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : The function is called when the driver functionality is
+            not longer required.
+*/
+
+GLOBAL void audio_Exit (void)
+{
+  audio_signal_callback = NULL;
+#if !defined (NEW_FRAME)
+  vsi_t_close (VSI_CALLER audio_handle);
+  audio_handle = VSI_ERROR;
+#endif
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//Disable Buzzer
+#ifndef FF_MMI_NO_BUZZER
+  BZ_Disable ();
+#endif
+  act_tone.status = NO_TONE;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_SetMute              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to enable or disable muting for
+            the device identified by the parameter in_Device. If the
+            mode for the specified device could be changed, the
+            function returns DRV_OK. If the specified device is
+            unknown or the device does not support muting, the function
+            returns DRV_INVALID_PARAMS.
+
+*/
+
+GLOBAL UBYTE audio_SetMute (UBYTE in_DeviceID, UBYTE in_Mode)
+{
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	local variable declarations
+#ifdef FF_MMI_SERVICES_MIGRATION
+	T_AUDIO_FULL_ACCESS_WRITE	p_parameter;
+	T_AUDIO_FULL_ACCESS_READ	p_parameter1;
+	T_RV_RETURN_PATH            return_path = {0, NULL};
+	T_AUDIO_RET					result;
+	static INT8					speaker_volume = 0;
+	INT8						setvolume = AUDIO_SPEAKER_VOLUME_MUTE;
+#endif	
+	
+  if (in_DeviceID EQ AUDIO_SPEAKER)
+  {
+    if (in_Mode AND audio_is_free)
+    {
+      TRACE_EVENT ("No speaker muting");
+#ifdef ALR
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	the previous volume is restored when we comeout of mute state (unmuting)
+//	At initialization we do not write the value since the new value is written
+#ifdef FF_MMI_SERVICES_MIGRATION
+		p_parameter.variable_indentifier = AUDIO_SPEAKER_VOLUME_LEVEL;
+		p_parameter.data = (void*)&speaker_volume;
+		result = audio_full_access_write(&p_parameter,return_path);
+		if(result != 0)
+			TRACE_FUNCTION("error -  setting speaker volume");
+#else
+      ABB_DlMute (0);
+#endif      
+#else
+      VG_DlMute (0);
+#endif
+      act_speakerMute = AUDIO_MUTING_OFF;
+    }
+    else
+    {
+      TRACE_EVENT ("Speaker muting");
+#ifdef ALR
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	read the current value and store it to before setting it to mute
+#ifdef FF_MMI_SERVICES_MIGRATION
+		p_parameter1.variable_indentifier = AUDIO_SPEAKER_VOLUME_LEVEL;
+		p_parameter1.data = (void*)&speaker_volume;
+		result = audio_full_access_read(&p_parameter1);
+		p_parameter.variable_indentifier = AUDIO_SPEAKER_VOLUME_MUTE;
+		p_parameter.data = (void*)&setvolume;
+		result = audio_full_access_write(&p_parameter,return_path);
+#else
+      ABB_DlMute (1);
+#endif      
+#else
+      VG_DlMute (1);
+#endif
+      act_speakerMute = AUDIO_MUTING_ON;
+    }
+  }
+  else if (in_DeviceID EQ AUDIO_MICROPHONE)
+  {
+    if (in_Mode AND audio_is_free)
+    {
+      TRACE_EVENT ("No microphone muting");
+      audio_UlMute (0);
+      act_micMute = AUDIO_MUTING_OFF;
+    }
+    else
+    {
+      TRACE_EVENT ("Microphone muting");
+      audio_UlMute (1);
+      act_micMute = AUDIO_MUTING_ON;
+    }
+  }
+  else
+  {
+    return DRV_INVALID_PARAMS;
+  }
+
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_GetMute              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to get the status whether muting
+            is enabled or disabled for the device identified by the
+            parameter in_Device. If the specified device is unknown
+            or the device does not support muting, the function
+            returns DRV_INVALID_PARAMS.
+
+*/
+
+GLOBAL UBYTE audio_GetMute (UBYTE in_DeviceID, UBYTE* out_Mode)
+{
+  if (in_DeviceID EQ AUDIO_SPEAKER)
+  {
+    *out_Mode = act_speakerMute;
+  }
+  else if (in_DeviceID EQ AUDIO_MICROPHONE)
+  {
+    *out_Mode = act_micMute;
+  }
+  else
+  {
+    return DRV_INVALID_PARAMS;
+  }
+
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_GetStatus            |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to retrieve the status of the driver.
+            In case of a successful completion the driver returns
+            DRV_OK and the current status of the driver in the buffer
+            out_StatusPtr points to.
+            In case the driver is not configured yet, it returns
+            DRV_NOTCONFIGURED. In this case the contents of the
+            buffer out_StatusPtr is invalid.
+            In case out_StatusPtr equals NULL or device is unknown
+            the driver returns DRV_INVALID_PARAMS.
+
+*/
+
+GLOBAL UBYTE audio_GetStatus (UBYTE               in_DeviceID,
+                              audio_Status_Type * out_StatusPtr)
+{
+  if ( out_StatusPtr EQ NULL )
+  {
+    return DRV_INVALID_PARAMS;
+  }
+  else
+  {
+    if (in_DeviceID EQ AUDIO_SPEAKER)
+    {
+      out_StatusPtr -> min_volume = AUDIO_MIN_VOLUME;
+      out_StatusPtr -> max_volume = AUDIO_MAX_VOLUME;
+    }
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//If Buzzer is available, set the minimum and maximum volume
+#ifndef FF_MMI_NO_BUZZER
+    else if (in_DeviceID EQ AUDIO_BUZZER)
+    {
+      out_StatusPtr -> min_volume = AUDIO_MIN_BUZ_VOLUME;
+      out_StatusPtr -> max_volume = AUDIO_MAX_BUZ_VOLUME;
+    }
+#endif
+    else if (in_DeviceID EQ AUDIO_MICROPHONE)
+    {
+      out_StatusPtr -> min_volume = AUDIO_MIN_MIC_VOLUME;
+      out_StatusPtr -> max_volume = AUDIO_MAX_MIC_VOLUME;
+    }
+    else
+    {
+      return DRV_INVALID_PARAMS;
+    }
+  }
+
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_GetSoundImage        |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to copy the image of a driver
+            internal sound image into an application specific sound
+            image buffer. The application may modify the sound.
+            In case of a successful completion the function returns
+            DRV_OK. In case the size of the buffer where the sound image
+            shall be copied to is too small the driver returns
+            DRV_INVALID_PARAMS. In case a specific driver implementation
+            does not support this functionality the driver returns
+            DRV_FCT_NOTSUPPORTED.
+
+*/
+
+GLOBAL UBYTE audio_GetSoundImage (UBYTE   in_SoundID,
+                                  void  * out_SoundImagePtr)
+{
+  return AUDIO_FCT_NOTSUPPORTED;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_SetAmplf             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to set the amplification for the
+            device identified by the parameter in_DeviceID.
+            In the case of a speaker this is the volume, for a
+            microphone - the pre-amplifier that regulates the
+            sensitivity of the microphone. The valid range depends on
+            the hardware used. If the amplification could be changed
+            for the specified device, the function returns DRV_OK. If
+            the amplification value (in_Amplf) is out of range or the
+            specified device is unknown or the specified device does
+            not support the amplification setting, the function
+            returns DRV_INVALID_PARAMS.
+
+*/
+
+GLOBAL UBYTE audio_SetAmplf (UBYTE in_DeviceID, UBYTE in_Amplf)
+{
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	local variable 
+#ifdef FF_MMI_SERVICES_MIGRATION
+	T_AUDIO_FULL_ACCESS_WRITE	p_parameter;
+	T_RV_RETURN_PATH          	return_path = {0, NULL};
+	T_AUDIO_RET					result;
+	INT8						volume;
+#endif	
+  if (in_DeviceID EQ AUDIO_MICROPHONE)
+  {
+    act_micVolume = 75;         /* voice quality is best at this microphone volume */
+#ifdef ALR
+#else
+    VG_UlVolume (act_micVolume);
+#endif
+  }
+  else if (in_DeviceID EQ AUDIO_SPEAKER)
+  {
+    TRACE_EVENT_P1("VOLUME=%d", in_Amplf);
+
+#ifdef ALR
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	The ABB values are converted to the corresponding audio service values
+#ifdef FF_MMI_SERVICES_MIGRATION
+	switch (in_Amplf)
+	{
+		case 255:
+		volume = AUDIO_SPEAKER_VOLUME_0dB;
+		break;
+		case 190:
+		volume = AUDIO_SPEAKER_VOLUME_6dB;
+		break;
+		case 125:
+		volume = AUDIO_SPEAKER_VOLUME_12dB;
+		break;
+		case 60:
+		volume = AUDIO_SPEAKER_VOLUME_18dB;
+		break;
+		case 1:
+		volume = AUDIO_SPEAKER_VOLUME_24dB;
+		break;
+		default:
+		volume = AUDIO_SPEAKER_VOLUME_12dB;
+		break;
+	}
+	p_parameter.variable_indentifier = AUDIO_SPEAKER_VOLUME_LEVEL;
+	p_parameter.data				=  (void*)&volume;
+	result = audio_full_access_write(&p_parameter, return_path);
+	if( result != 0)
+		TRACE_FUNCTION("set volume failed");
+#else
+    ABB_DlVolume (in_Amplf);    /* output volume */
+#endif
+#ifdef FF_TTY
+    if (!tty_state)
+#endif
+    {
+      /* ABB_SideTone (175); */  /* To avoid the side tone reseting */
+    }
+#else
+    VG_DlVolume (in_Amplf);     /* output volume */
+    /* VG_SideTone (175); */ /* To avoid the side tone reseting */
+#endif
+    act_speakerVolume = in_Amplf;
+  }
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//If  Buzzer is available , set the volume
+#ifndef FF_MMI_NO_BUZZER
+  else if (in_DeviceID EQ AUDIO_BUZZER)
+  {
+    act_buzVolume = in_Amplf;
+  }
+#endif
+  else
+  {
+    return DRV_INVALID_PARAMS;
+  }
+
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_GetAmplf             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to get the amplification for the
+            device identified by the parameter in_DeviceID.
+            In the case of a speaker this is the volume, for a
+            microphone - the pre-amplifier that regulates the
+            sensitivity of the microphone. The valid range depends on
+            the hardware used.If the specified device is unknown the
+            function returns DRV_INVALID_PARAMS.
+
+*/
+
+GLOBAL UBYTE audio_GetAmplf (UBYTE in_DeviceID, UBYTE* out_Amplf)
+{
+  if (in_DeviceID EQ AUDIO_MICROPHONE)
+  {
+    *out_Amplf = act_micVolume;
+  }
+  else if (in_DeviceID EQ AUDIO_SPEAKER)
+  {
+    *out_Amplf = act_speakerVolume;
+  }
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//If Buzzer is available, set the out volume
+  #ifndef FF_MMI_NO_BUZZER
+  else if (in_DeviceID EQ AUDIO_BUZZER)
+  {
+    *out_Amplf = act_buzVolume;
+  }
+  #endif
+  else
+  {
+    return DRV_INVALID_PARAMS;
+  }
+
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_PlaySoundID          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to play a sound or melody. The
+            function returns immediately after the "play process" has
+            been activated. It is implementation dependent if the
+            device/driver supports playing multiple sounds simultan-
+            eously, i.e. accepting multiple calls of audio_PlaySoundID().
+            If the calling process should be notified when the sound has
+            stopped playing automatically, the signal AUDIO_SIGTYPE_
+            SOUNDEND must be set using the audio_SetSignal() function.
+            If the special driver implementation or the device does
+            not support volume control, the driver ignores the value.
+            If the sound can be played, the function returns DRV_OK.
+            If the device is currently playing the sound identified by
+            the parameter in_SoundID, the function returns DRV_INPROCESS.
+            If the device/driver is currently playing a sound, but does
+            not support playing multiple sounds simultaneously, the
+            driver returns DRV_INPROCESS.
+
+*/
+
+GLOBAL UBYTE audio_PlaySoundID (UBYTE in_DeviceID,
+                                UBYTE in_SoundID,
+                                BYTE  in_RelVolume,
+                                UBYTE in_Repeats)
+{
+
+TRACE_EVENT_P1("audio_PlaySoundID in_SoundID is %d",in_SoundID);
+  /*
+   * switch off current tone
+   */
+  switch (act_tone.status)
+  {
+
+//Apr 04, 2005    REF: ENH 30063 xdeepadh  
+//If Buzzer is available, disable the buzzer
+#ifndef FF_MMI_NO_BUZZER
+    case BUZZER_ON:
+      BZ_Disable ();
+    case BUZZER_SILENT:
+#endif
+      /*
+       * No Break
+       */
+    case TONE_ON:
+    case TONE_SILENT:
+#if defined (NEW_FRAME)
+      vsi_t_stop (VSI_CALLER CST_AUDIOTIMER);
+#else
+      vsi_t_stop (VSI_CALLER audio_handle);
+#endif
+      break;
+    default:
+      break;
+  }
+
+  /*
+   * configure new tone
+   */
+  if (in_SoundID EQ TONES_KEYBEEP)      /* that is keybeep */
+  {
+#if defined (RIV_AUDIO)
+    beep.frequency_beep[0] = ((F_697) >> 5) & 0x07ff;
+    beep.amplitude_beep[0] = -((char) ((F_697) & 0x001f));
+    beep.frequency_beep[1] = ((F_697) >> 5) & 0x07ff;
+    beep.amplitude_beep[1] = -((char) ((F_697) & 0x001f));
+    beep.duration = 120;
+  #ifdef _TARGET_
+    /*
+     * This function seems only to be available on target. (db / 2001-07-16)
+     */
+    return audio_keybeep_start(beep,riv_audio_rp);
+  #endif
+#else
+  /* MPHC is not present in GTI case */
+  #ifndef FF_GTI
+    PALLOC (keybeep, MMI_KEYBEEP_REQ);
+
+    keybeep->d_k_x1_kt0    = F_697;
+    keybeep->d_k_x1_kt1    = F_697;
+    keybeep->d_dur_kb      = 6;        /* equal 120 ms */
+    PSENDX (L1, keybeep);
+  #endif /* FF_GTI */
+#endif
+  }
+  else
+  {
+    act_tone.call_tone   = in_SoundID;
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//Before playing the tone, set the status and the tone type . 
+#ifndef FF_MMI_NO_BUZZER	 //If Buzzer is available
+    act_tone.status      = BUZZER_SILENT;
+    act_tone.type        = (UBYTE)TONE_TYPE[in_SoundID];
+#else			//If Buzzer is not available
+    act_tone.status      = TONE_SILENT;
+    act_tone.type        = (UBYTE)AUDIO;
+#endif
+    act_tone.descr       = (T_DESCR *)TONE_DESCR[in_SoundID];
+    act_tone.style       = in_Repeats;
+    act_tone.descr_index = 0;
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//If Buzzer is available, call the audio_buzzer
+#ifndef FF_MMI_NO_BUZZER
+    if (act_tone.type EQ BUZZER)
+    {
+      act_tone.volume = act_buzVolume;
+      audio_buzzer ();
+    }
+    else
+#endif
+    {
+      act_tone.volume = act_speakerVolume;
+      audio_audio ();
+    }
+  }
+
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_PlaySoundbyImage     |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to play a sound or melody. The
+            image of the sound/melody is passed to the driver (the
+            sound image format is implmementation dependent).
+
+*/
+
+GLOBAL UBYTE audio_PlaySoundbyImage (UBYTE   in_DeviceID,
+                                     void  * in_SoundImagePtr,
+                                     BYTE    in_RelVolume,
+                                     UBYTE   in_Repeats)
+{
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_StopSoundbyID        |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to manually stop playing a sound
+            or melody. When a sound is stopped manually, no signal is
+            created as to whether or not the signal AUDIO_SIGTYP_SOUNDEND
+            has been defined. If the function could stop playing the
+            specified sound, the function returns DRV_OK. If the device
+            is unknown or does not support this function or the specified
+            sound ID is invalid, the function returns DRV_INVALID_PARAMS.
+
+*/
+
+GLOBAL UBYTE audio_StopSoundbyID (UBYTE in_DeviceID,
+                                  UBYTE in_SoundID)
+{
+
+TRACE_EVENT_P1("audio_StopSoundbyID in_SoundID is %d",in_SoundID);
+  /*
+   * switch off current tone
+   */
+  switch (act_tone.status)
+  {
+//Apr 04, 2005    REF: ENH 30063 xdeepadh   
+//If Buzzer is available, disable it.
+#ifndef FF_MMI_NO_BUZZER
+    case BUZZER_ON:
+      BZ_Disable ();
+    case BUZZER_SILENT:
+#endif
+      /*
+       * No Break
+       */
+    case TONE_ON:
+    case TONE_SILENT:
+
+      /* Stop timer for reload */
+
+#if defined (NEW_FRAME)
+      vsi_t_stop (VSI_CALLER CST_AUDIOTIMER);
+#else
+      vsi_t_stop (VSI_CALLER audio_handle);
+#endif
+
+      if (act_tone.status EQ TONE_ON)
+      {
+      /*
+       * stop the current playing audio tone immediately
+       */
+#if defined (RIV_AUDIO)
+  #ifdef _TARGET_
+        /*
+         * This function seems only to be available on target. (db / 2001-07-16)
+         */
+        audio_tones_stop(riv_audio_rp);
+  #endif
+#else
+  #ifndef FF_GTI
+        PALLOC (audio, MMI_TONE_REQ);
+
+        audio->d_k_x1_t0 = 0;
+        audio->d_k_x1_t1 = 0;
+        audio->d_k_x1_t2 = 0;
+        audio->d_pe_rep  = 1;
+        audio->d_pe_off  = 0;
+        audio->d_se_off  = 0;
+        audio->d_bu_off  = 0;
+        audio->d_t0_on   = 0;
+        audio->d_t0_off  = 0;
+        audio->d_t1_on   = 0;
+        audio->d_t1_off  = 0;
+        audio->d_t2_on   = 0;
+        audio->d_t2_off  = 0;
+
+        PSENDX (L1, audio);
+  #endif /* FF_GTI */
+#endif
+      }
+      act_tone.status = NO_TONE;
+
+      break;
+    default:
+      break;
+  }
+
+  return DRV_OK;
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_StopSoundbyImage     |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to manually stop playing a sound
+            or melody. When a sound is stopped manually, no signal is
+            created as to whether or not the signal AUDIO_SIGTYP_SOUNDEND
+            has been defined. If the function could stop playing the
+            specified sound image, the function returns DRV_OK.
+            If the device is unknown or does not support this function
+            or the specified sound ID is invalid, the function
+            returns DRV_INVALID_PARAMS.
+
+*/
+
+GLOBAL UBYTE audio_StopSoundbyImage (UBYTE   in_DeviceID,
+                                     void  * in_SoundImagePtr)
+{
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_SetSignal            |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to defines a single signal or multiple
+            signals that is/are indicated to the process when the
+            event identified in the signal information data type as
+            SignalType occurs. To remove a signal call the function
+            audio_ResetSignal(). If one of the parameters of the
+            signal information data is invalid, the function returns
+            DRV_INVALID_PARAMS. If no signal call-back function has
+            been defined at the time of initialization, the driver
+            returns DRV_SIGFCT_NOTAVAILABLE.
+
+*/
+
+GLOBAL UBYTE audio_SetSignal (drv_SignalID_Type * in_SignalIDPtr)
+{
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_ResetSignal          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used to remove a previously set single
+            multiple signals. The signals that are removed are identified
+            by the Signal Information Data element Signal Type. All other
+            elements of the signal information data must be identical
+            to the signal(s) that is/are to be removed.
+
+*/
+
+GLOBAL UBYTE audio_ResetSignal (drv_SignalID_Type * in_SignalIDPtr)
+{
+  return DRV_OK;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_timeout              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function is used after timeout of the audio timer.
+
+*/
+
+#if defined (NEW_FRAME)
+GLOBAL void audio_timeout (USHORT index)
+#else
+GLOBAL void audio_timeout (T_VSI_THANDLE handle)
+#endif
+{
+#if defined (NEW_FRAME)
+  if (index EQ CST_AUDIOTIMER)
+#else
+  if (handle EQ audio_handle)
+#endif
+  {
+    /*ccc
+     * only if it is the audio timer
+     */
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+//For Buzzer
+#ifndef FF_MMI_NO_BUZZER
+    if (act_tone.type EQ BUZZER)
+      audio_buzzer ();
+    else
+#endif
+      audio_audio ();
+  }
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_buzzer               |
++--------------------------------------------------------------------+
+
+  PURPOSE : Process a buzzer tone.
+
+*/
+//Apr 04, 2005    REF: ENH 30063 xdeepadh
+#ifndef FF_MMI_NO_BUZZER  //If buzzer is available
+LOCAL void audio_buzzer (void)
+{
+  if (act_tone.status EQ NO_TONE)
+    return;
+
+  switch (act_tone.descr
+          [act_tone.descr_index].command_1)
+  {
+    case 0:
+      /*
+       * switch buzzer off
+       */
+      BZ_Disable ();
+#if defined (NEW_FRAME)
+      vsi_t_start (VSI_CALLER CST_AUDIOTIMER,
+                   act_tone.descr
+                   [act_tone.descr_index++].length*60/13);
+#else
+      vsi_t_start (VSI_CALLER audio_handle,
+                   act_tone.descr
+                   [act_tone.descr_index++].length*60/13);
+#endif
+      act_tone.status = BUZZER_SILENT;
+      break;
+
+    case 0xFFFE:
+      /*
+       * switch buzzer on continously
+       */
+      BZ_Enable ();
+      BZ_Volume (act_buzVolume);
+      BZ_Tone   (act_tone.descr
+                 [act_tone.descr_index].command_1);
+      act_tone.status = BUZZER_ON;
+      break;
+
+    case 0xFFFF:
+      /*
+       * end of list
+       */
+      BZ_Disable ();
+      if (act_tone.style EQ AUDIO_PLAY_INFINITE)
+      {
+        act_tone.descr_index = 0;
+        audio_buzzer ();
+      }
+      else
+        act_tone.status = NO_TONE;
+      break;
+
+    default:
+      /*
+       * switch buzzer on
+       */
+      BZ_Enable ();
+      BZ_Volume (act_buzVolume);
+      BZ_Tone   (act_tone.descr
+                     [act_tone.descr_index].command_1);
+#if defined (NEW_FRAME)
+      vsi_t_start (VSI_CALLER
+                   CST_AUDIOTIMER,
+                   act_tone.descr
+                   [act_tone.descr_index++].length*60/13);
+#else
+      vsi_t_start (VSI_CALLER
+                       audio_handle,
+                   act_tone.descr
+                   [act_tone.descr_index++].length*60/13);
+#endif
+      act_tone.status = BUZZER_ON;
+      break;
+  }
+}
+
+#endif
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_audio                |
++--------------------------------------------------------------------+
+
+  PURPOSE : Process an audio tone.
+
+*/
+
+LOCAL void audio_audio (void)
+{
+
+TRACE_EVENT("audio_audio");
+  if (act_tone.status EQ NO_TONE)
+    return;
+
+  switch (act_tone.descr
+          [act_tone.descr_index].command_1)
+  {
+    case 0:
+      /*
+       * switch audio off
+       */
+#if defined (NEW_FRAME)
+      vsi_t_start (VSI_CALLER CST_AUDIOTIMER,
+                   act_tone.descr
+                   [act_tone.descr_index++].length*60/13);
+#else
+      vsi_t_start (VSI_CALLER audio_handle,
+                       act_tone.descr
+                   [act_tone.descr_index++].length*60/13);
+#endif
+      act_tone.status = TONE_SILENT;
+      break;
+
+    case 0xFFFF:
+      /*
+       * end of list
+       */
+      if (act_tone.style EQ AUDIO_PLAY_INFINITE)
+      {
+        act_tone.descr_index = 0;
+        audio_audio ();
+      }
+      else
+        act_tone.status = NO_TONE;
+      break;
+
+    default:
+      /*
+       * switch audio tone on
+       */
+      {
+#if defined (RIV_AUDIO)
+        USHORT fa1 = act_tone.descr[act_tone.descr_index].command_1;
+        USHORT fa2 = act_tone.descr[act_tone.descr_index].command_2;
+        ULONG len = act_tone.descr[act_tone.descr_index].length;
+        t.tones[0].start_tone = 0;
+        t.tones[0].stop_tone = (USHORT) ((60 * len) / 13);
+        t.tones[0].frequency_tone = (fa1 >> 5) & 0x07ff;
+        t.tones[0].amplitude_tone = -((char) (fa1 & 0x001f));
+        t.tones[1].start_tone = 0;
+        t.tones[1].stop_tone = (USHORT) ((60 * len) / 13);
+        t.tones[1].frequency_tone = (fa2 >> 5) & 0x07ff;
+        t.tones[1].amplitude_tone = -((char) (fa2 & 0x001f));
+        t.tones[2].start_tone = 0;
+//     t.tones[2].stop_tone = 1; - NDH : Removed as this does not comply with the i/f spec
+        t.tones[2].stop_tone = (USHORT) ((60 * len) / 13);
+        t.tones[2].frequency_tone = NO_TONE;
+        t.tones[2].amplitude_tone = 0;
+        t.frame_duration = (USHORT) ((60 * len) / 13);
+        t.sequence_duration = (USHORT) ((60 * len) / 13);   /* why 120 ??? -> changed to 60 */
+        t.period_duration = (USHORT) ((60 * len) / 13);     /*         -"-                  */
+        t.repetition = 1;
+  #ifdef _TARGET_
+        /*
+         * This function seems only to be available on target. (db / 2001-07-16)
+         */
+        audio_tones_start(&t,riv_audio_rp);
+  #endif
+#else
+  #ifndef FF_GTI
+        PALLOC (audio, MMI_TONE_REQ);
+          /*
+           * Convert TDMA frames to 20 ms ->  3/13
+           */
+
+          audio->d_k_x1_t0 = act_tone.descr[act_tone.descr_index].command_1;
+          audio->d_k_x1_t1 = act_tone.descr[act_tone.descr_index].command_2;
+          audio->d_k_x1_t2 = 0;
+          audio->d_pe_rep  = 1;
+          audio->d_pe_off  = (6*act_tone.descr[act_tone.descr_index].length) / 13;
+          audio->d_se_off  = (6*act_tone.descr[act_tone.descr_index].length) / 13;
+          audio->d_bu_off  = (3*act_tone.descr[act_tone.descr_index].length) / 13;
+          audio->d_t0_on   = 0;
+          audio->d_t0_off  = (3*act_tone.descr[act_tone.descr_index].length) / 13;
+          audio->d_t1_on   = 0;
+          audio->d_t1_off  = (3*act_tone.descr[act_tone.descr_index].length) / 13;
+          audio->d_t2_on   = 0;
+          audio->d_t2_off  = 0;
+
+          PSENDX (L1, audio);
+  #endif /* FF_GTI */
+#endif
+
+#if defined (NEW_FRAME)
+          vsi_t_start (VSI_CALLER CST_AUDIOTIMER,
+                       act_tone.descr
+                       [act_tone.descr_index++].length*60/13);
+#else
+          vsi_t_start (VSI_CALLER audio_handle,
+                       act_tone.descr
+                       [act_tone.descr_index++].length*60/13);
+#endif
+          act_tone.status = TONE_ON;
+      }
+      break;
+  }
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_UlMute               |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function mutes the uplink path.
+
+*/
+LOCAL void audio_UlMute (UBYTE mute)
+{
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	local variable definition
+#ifdef FF_MMI_SERVICES_MIGRATION
+	T_AUDIO_FULL_ACCESS_WRITE	p_parameter;
+	T_AUDIO_FULL_ACCESS_READ	p_parameter1;
+	T_RV_RETURN_PATH            return_path = {0, NULL};
+	T_AUDIO_RET					result;
+//	June 13, 2005	REF : GSM_ENH_32062 - xpradipg
+//	the default value is assigned to AUDIO_MICROPHONE_OUTPUT_BIAS_2_0V	
+	static INT8					microphone_gain = AUDIO_MICROPHONE_OUTPUT_BIAS_2_0V;
+	INT8						setgain = AUDIO_MICROPHONE_MUTE;
+#endif
+  if (mute)
+  {
+#ifdef ALR
+//	June 13, 2005	REF : GSM_ENH_32062 - xpradipg
+//	the audio is unmuted for the variable "mute" with value greater than "0"
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	read the microphone gain, store it and mute the microphone
+#ifdef FF_MMI_SERVICES_MIGRATION		
+		p_parameter1.variable_indentifier = AUDIO_MICROPHONE_GAIN;
+		p_parameter1.data = (void*)&microphone_gain;
+		result = audio_full_access_read(&p_parameter1);
+		if(result != 0)
+		{
+			TRACE_EVENT("error reading the handeld parameters");
+		}
+		p_parameter.variable_indentifier = AUDIO_MICROPHONE_GAIN;
+		setgain = AUDIO_MICROPHONE_MUTE;
+		p_parameter.data = (void*)&setgain;
+		result = audio_full_access_write(&p_parameter, return_path); 	
+		if(result != 0)
+			TRACE_EVENT("ERROR - not written1");
+#else
+    ABB_UlMute (1);
+#endif    
+#else
+    VG_UlVolume (0);
+#endif
+  }
+  else
+  {
+#ifdef ALR
+//	June 13, 2005	REF : GSM_ENH_32062 - xpradipg
+//	the audio is muted for the variable "mute" with value <= to "0"
+//	Apr 26, 2005   REF : CRR 30627 xpradipg
+//	restore the volume back once the unmuting is done
+#ifdef FF_MMI_SERVICES_MIGRATION	
+		p_parameter.variable_indentifier = (UINT8)AUDIO_MICROPHONE_GAIN ;
+		p_parameter.data				=  (void*)&microphone_gain;
+		result = audio_full_access_write(&p_parameter, return_path); 	
+		if(result != 0)
+			TRACE_EVENT("ERROR - not written");
+#else
+    ABB_UlMute (0);
+#endif    
+#else
+    VG_UlVolume (act_micVolume);
+#endif
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : DRV_AUDIO                  |
+| STATE   : code                ROUTINE : audio_set_tty              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function (de)activates the TTY codec.
+
+*/
+
+#if defined (FF_TTY) || defined (_TTY_SIMU)
+GLOBAL void audio_set_tty (T_TTY_CMD tty)
+{
+  if (tty < TTY_OFF OR tty > TTY_ALL)
+  {
+    TRACE_EVENT_P1 ("TTY invalid parameter: %d", tty);
+    return;
+  }
+  if (tty NEQ TTY_OFF)
+  {
+#if defined (RIV_AUDIO) && !defined (_TTY_SIMU)
+    T_AUDIO_MODE_SAVE audio_mode;
+    T_RV_RETURN_PATH ret = {NOT_PRESENT_8BIT, NULL};
+    T_AUDIO_RET audio_ret;
+
+    if (!tty_state)
+    {
+      tty_cfg.Mode = TTY_EXT_START;
+      tty_cfg.ThresholdRead = tty_cfg.ThreshHoldWrite = 0;
+
+      ret.callback_func = audio_save_def_return;
+      strcpy (audio_mode.audio_mode_filename, audio_mode_names_tty[0]);
+      audio_ret = audio_mode_save (&audio_mode, ret);
+
+      if (audio_ret NEQ AUDIO_OK)
+      {
+        AUDIO_TRC_EVENT_P1 ("Error AUDIO MODE SAVE def: %d", (int)audio_ret);
+      }
+      else
+      {
+        AUDIO_TRC_FUNC ("AUDIO MODE SAVE def");
+        tty_cmd = (UBYTE)tty;
+      }
+    }
+    else
+    {
+      AUDIO_TRC_EVENT ("TTY running");
+    }
+#else
+    TRACE_EVENT_P1 ("TTY start: %d", tty);
+#endif
+  }
+  else
+  {
+#if defined (RIV_AUDIO) && !defined (_TTY_SIMU)
+    T_RV_RETURN_PATH ret = {NOT_PRESENT_8BIT, NULL};
+    T_AUDIO_RET audio_ret;
+
+    if (tty_state)
+    {
+      ret.callback_func = audio_tty_return;
+      tty_cfg.ThresholdRead = tty_cfg.ThreshHoldWrite = 0;
+      tty_cfg.Mode = TTY_STOP;
+      audio_ret = audio_tty_set_config (&tty_cfg, &ret);
+
+      if (audio_ret NEQ AUDIO_OK)
+      {
+        tty_state = FALSE;
+        AUDIO_TRC_EVENT_P1 ("Error TTY stop: %d", (int)audio_ret);
+      }
+      else
+      {
+        AUDIO_TRC_FUNC ("TTY to be stopped");
+      }
+    }
+    else
+    {
+      AUDIO_TRC_FUNC ("TTY already ended");
+    }
+#else
+    TRACE_EVENT ("TTY stop");
+#endif
+  }
+}
+
+/* This function changes the TTY mode during an active TTY call */
+GLOBAL void audio_dyn_set_tty (T_TTY_CMD tty)
+{
+  T_AUDIO_MODE_LOAD audio_mode;
+  T_RV_RETURN_PATH load_ret = {NOT_PRESENT_8BIT, NULL};
+  T_AUDIO_RET audio_ret;
+  UBYTE cmd;
+
+  if (tty < TTY_OFF OR tty > TTY_ALL)
+  {
+    TRACE_EVENT_P1 ("TTY invalid parameter: %d", tty);
+    return;
+  }
+  
+#if defined (RIV_AUDIO) && !defined (_TTY_SIMU)
+
+    cmd = (UBYTE)tty;
+    if (tty_state)
+    {
+      load_ret.callback_func = audio_dyn_load_return;
+    }
+    else
+    {
+      /*
+       * If the TTY mode was default before then need to start
+       * the TTY driver
+       */
+      tty_cfg.Mode = TTY_EXT_START;
+      tty_cfg.ThresholdRead = tty_cfg.ThreshHoldWrite = 0;
+      load_ret.callback_func = audio_load_return;
+    }
+
+    strcpy (audio_mode.audio_mode_filename, audio_mode_names_tty[(int)cmd]);
+    audio_ret = audio_mode_load (&audio_mode, load_ret);
+
+    if (audio_ret NEQ AUDIO_OK)
+    {
+      AUDIO_TRC_EVENT_P1 ("Error AUDIO MODE LOAD TTY: %d", (int)audio_ret);
+    }
+    else
+    {
+      AUDIO_TRC_FUNC ("AUDIO MODE LOAD def");
+      tty_cmd = (UBYTE)tty;
+    }
+#else
+    TRACE_EVENT_P1 ("TTY mode change: %d", tty);
+#endif
+
+}
+
+#if defined (RIV_AUDIO) AND !defined (_TTY_SIMU)
+LOCAL void audio_tty_return (void *tty_result)
+{
+  T_AUDIO_MODE_LOAD audio_mode;
+  T_RV_RETURN_PATH ret = {NOT_PRESENT_8BIT, NULL};
+  T_AUDIO_RET audio_ret;
+
+  if (((T_AUDIO_TTY_STATUS *)tty_result)->status NEQ AUDIO_OK)
+  {
+    AUDIO_TRC_EVENT_P1 ("Error TTY callback: %d",
+                        (int)((T_AUDIO_TTY_STATUS *)tty_result)->status);
+  }
+  tty_state = FALSE;
+  tty_cfg.Mode = TTY_STOP;
+  AUDIO_TRC_FUNC ("TTY end");
+
+  ret.callback_func = audio_load_return;
+  strcpy (audio_mode.audio_mode_filename, audio_mode_names_tty[0]);
+  audio_ret = audio_mode_load (&audio_mode, ret);
+
+  if (audio_ret NEQ AUDIO_OK)
+  {
+    AUDIO_TRC_EVENT_P1 ("Error AUDIO MODE LOAD def: %d", (int)audio_ret);
+  }
+}
+
+LOCAL void audio_save_def_return (void *result)
+{
+  T_AUDIO_MODE_LOAD audio_mode;
+  T_RV_RETURN_PATH load_ret = {NOT_PRESENT_8BIT, NULL};
+  T_AUDIO_RET audio_ret;
+
+  if (((T_AUDIO_SAVE_DONE *)result)->status NEQ AUDIO_OK)
+  {
+    AUDIO_TRC_EVENT_P1 ("Error AUDIO MODE SAVE def callback: %d",
+                        (int)((T_AUDIO_SAVE_DONE *)result)->status);
+  }
+  else
+  {
+    AUDIO_TRC_FUNC ("AUDIO def saved");
+
+    load_ret.callback_func = audio_load_return;
+    strcpy (audio_mode.audio_mode_filename, audio_mode_names_tty[(int)tty_cmd]);
+    audio_ret = audio_mode_load (&audio_mode, load_ret);
+
+    if (audio_ret NEQ AUDIO_OK)
+    {
+      AUDIO_TRC_EVENT_P1 ("Error AUDIO MODE LOAD TTY: %d", (int)audio_ret);
+    }
+  }
+}
+
+LOCAL void audio_load_return (void *result)
+{
+  if (((T_AUDIO_LOAD_DONE *)result)->status NEQ AUDIO_OK)
+  {
+    AUDIO_TRC_EVENT_P1 ("Error AUDIO MODE LOAD callback: %d",
+                        (int)((T_AUDIO_LOAD_DONE *)result)->status);
+  }
+  else
+  {
+    T_RV_RETURN_PATH ret = {NOT_PRESENT_8BIT, NULL};
+    T_AUDIO_RET audio_ret;
+
+    if (!tty_state AND tty_cfg.Mode EQ TTY_EXT_START)
+    {
+      ret.callback_func =  audio_tty_return;
+      audio_ret = audio_tty_set_config (&tty_cfg, &ret);
+
+      if (audio_ret NEQ AUDIO_OK)
+      {
+        AUDIO_TRC_EVENT_P1 ("Error TTY set: %d", (int)audio_ret);
+      }
+      else
+      {
+        tty_state = TRUE;
+        AUDIO_TRC_FUNC ("AUDIO TTY loaded & start");
+      }
+    }
+    else if (!tty_state AND tty_cfg.Mode EQ TTY_STOP)
+    {
+      tty_cmd = (UBYTE)TTY_OFF;
+      AUDIO_TRC_FUNC ("AUDIO def loaded");
+    }
+    else
+    {
+      AUDIO_TRC_EVENT_P2 ("TTY improper state: %d; mode: %d",
+                          (int)tty_state, (int)tty_cfg.Mode);
+    }
+  }
+}
+
+LOCAL void audio_dyn_load_return (void *result)
+{
+  if (((T_AUDIO_LOAD_DONE *)result)->status NEQ AUDIO_OK)
+  {
+    AUDIO_TRC_EVENT_P1 ("Error AUDIO MODE LOAD callback: %d",
+                        (int)((T_AUDIO_LOAD_DONE *)result)->status);
+  }
+  else
+  {
+    AUDIO_TRC_EVENT_P1 ("TTY mode changed: %d", (int)tty_cmd);
+  }
+}
+#endif
+#endif
+
+/*******************************************************************
+ *                                                                 *
+ * PART II: Simulation for Windows                                 *
+ *                                                                 *
+ *******************************************************************/
+
+#if defined (_SIMULATION_)
+/*
+ * Dummies for driver calls
+ */
+
+LOCAL  void BZ_Init          (void)
+{
+}
+
+LOCAL  void BZ_Enable        (void)
+{
+}
+
+LOCAL  void BZ_Disable       (void)
+{
+}
+
+LOCAL  void BZ_Tone          (int f)
+{
+}
+
+LOCAL  void BZ_Volume        (int v)
+{
+}
+
+#ifdef ALR
+LOCAL  void ABB_DlVolume     (UBYTE v)
+{
+}
+
+LOCAL  void ABB_DlMute       (UBYTE mute)
+{
+}
+
+LOCAL  void ABB_UlMute       (UBYTE value)
+{
+}
+
+LOCAL  void ABB_SideTone     (UBYTE v)
+{
+}
+#else
+LOCAL  void VG_UlVolume      (UBYTE v)
+{
+}
+
+LOCAL  void VG_DlVolume      (UBYTE v)
+{
+}
+
+LOCAL  void VG_DlMute        (UBYTE mute)
+{
+}
+
+LOCAL  void VG_SideTone      (UBYTE v)
+{
+}
+#endif
+
+#endif
+
+#if defined (RIV_AUDIO)
+void audio_riv_audio_cb (void *buf)
+{
+    /* nothing to do for this time */
+}
+#endif