FreeCalypso > hg > freecalypso-sw
diff gsm-fw/cdg/cdginc-conservative/m_rr_com.val @ 656:9ba088a875bd
gsm-fw/cdg: "conservative" version created
| author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
|---|---|
| date | Thu, 25 Sep 2014 10:00:35 +0000 |
| parents | |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/gsm-fw/cdg/cdginc-conservative/m_rr_com.val Thu Sep 25 10:00:35 2014 +0000 @@ -0,0 +1,441 @@ +/* ++--------------------------------------------------------------------------+ +| PROJECT : PROTOCOL STACK | +| FILE : m_rr_com.val | +| SOURCE : "msg\rr_com.mdf" | +| LastModified : "2004-01-16" | +| IdAndVersion : "8010.606.02.008" | +| SrcFileTime : "Wed Nov 28 10:20:42 2007" | +| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:54 2014 | +| !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | ++--------------------------------------------------------------------------+ +*/ + +/* PRAGMAS + * PREFIX : NONE + * COMPATIBILITY_DEFINES : NO (require PREFIX) + * ALWAYS_ENUM_IN_VAL_FILE: NO + * ENABLE_GROUP: NO + * CAPITALIZE_TYPENAME: NO + * CCDNAME: RR_COM + */ + + +#ifndef M_RR_COM_VAL +#define M_RR_COM_VAL + + +#define CDG_ENTER__M_RR_COM_VAL + +#define CDG_ENTER__FILENAME _M_RR_COM_VAL +#define CDG_ENTER__M_RR_COM_VAL__FILE_TYPE CDGINC +#define CDG_ENTER__M_RR_COM_VAL__LAST_MODIFIED _2004_01_16 +#define CDG_ENTER__M_RR_COM_VAL__ID_AND_VERSION _8010_606_02_008 + +#define CDG_ENTER__M_RR_COM_VAL__SRC_FILE_TIME _Wed_Nov_28_10_20_42_2007 + +#include "CDG_ENTER.h" + +#undef CDG_ENTER__M_RR_COM_VAL + +#undef CDG_ENTER__FILENAME + + +// VALTAB-FF: REL99 +// +// Value constants for VAL_ab_type +// +// #define AB_8_BIT (0x0) /* 8 bit access burst shall be used */ +// #define AB_11_BIT (0x1) /* 11 bit access burst shall be used */ + +/* + * Value constants for VAL_acc_tech_typ + */ +#define VAL_ACC_TECH_TYP___DEF (0x0) /* unknown */ +#define ACC_GSM_P (0x0) /* GSM P */ +#define ACC_GSM_E (0x1) /* GSM E -note that GSM E covers GSM P */ +#define ACC_GSM_R (0x2) /* GSM R - note that GSM R covers GSM E and GSM P */ +#define ACC_GSM_1800 (0x3) /* GSM 1800 (DCS) */ +#define ACC_GSM_1900 (0x4) /* GSM 1900 (PCS) */ +#define ACC_GSM_450 (0x5) /* GSM 450 */ +#define ACC_GSM_480 (0x6) /* GSM 480 */ +#define ACC_GSM_850 (0x7) /* GSM 850 */ +// VAL-FF: REL99 +// #define ACC_CAP_SAME_AS_PRECED (0xf) /* When access capabilities of a band is same as it's previously included band. */ +// VAL-FF: REL99 +// #define ACC_INVALID (0xe) /* no valid access technology type present (this value isn?t defined in the specification) */ +// VAL-FF: !REL99 +#define ACC_INVALID (0xf) /* no valid access technology type present (this value isn?t defined in the specification) */ + +/* + * Value constants for VAL_pow_class + */ +#define POWER_CLASS_1 (0x1) /* Power Class 1 */ +#define POWER_CLASS_2 (0x2) /* Power Class 2 */ +#define POWER_CLASS_3 (0x3) /* Power Class 3 */ +#define POWER_CLASS_4 (0x4) /* Power Class 4 */ +#define POWER_CLASS_5 (0x5) /* Power Class 5 */ +#define VAL_POW_CLASS___6 (0x6) /* Reserved */ +#define VAL_POW_CLASS___7 (0x7) /* Reserved */ +#define MIN_CLASS_GSM (0x2) /* minimal GSM power class */ +#define MAX_CLASS_GSM (0x5) /* maximal GSM power class */ +#define MIN_CLASS_DCS (0x1) /* minimal DCS power class */ +#define MAX_CLASS_DCS (0x3) /* maximal DCS power class */ +#define MIN_CLASS_PCS (0x1) /* minimal PCS power class */ +#define MAX_CLASS_PCS (0x3) /* maximal PCS power class */ +#define CLASS_MIN_POW_GSM (0x5) /* GSM power class with the lowest output power */ +#define CLASS_MIN_POW_DCS (0x2) /* DCS power class with the lowest output power */ +#define CLASS_MIN_POW_PCS (0x2) /* PCS power class with the lowest output power */ +#define IDX_PWRCLASS_900 (0x0) /* Index for use with rf_cap.rf_power.pow_class4[] array */ +#define IDX_PWRCLASS_1800 (0x1) /* Index for use with rf_cap.rf_power.pow_class4[] array */ +#define IDX_PWRCLASS_1900 (0x2) /* Index for use with rf_cap.rf_power.pow_class4[] array */ +#define IDX_PWRCLASS_850 (0x3) /* Index for use with rf_cap.rf_power.pow_class4[] array */ +#define IDX_PWRCLASS_400 (0x4) /* Index for use with rf_cap.rf_power.pow_class4[] array */ +// VAL-FF: REL99 +// #define IDX_PWRCLASS_700 (0x5) /* Index for use with rf_cap.rf_power.pow_class4[] array */ + +/* + * Value constants for VAL_bool + */ +#define NO (0x0) /* value is not set */ +#define YES (0x1) /* value is set */ +#define NOT_SUPPORTED (0x0) /* feature not supported */ +#define SUPPORTED (0x1) /* feature supported */ + +/* + * Value constants for VAL_flag + */ +#define GRR_NO (0x0) /* not present */ +#define GRR_YES (0x1) /* present */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_bss_paging_coord +// +// #define CS_PG_NOT_SUPPORTED (0x0) /* The cell does not support Circuit-Switched paging co-ordination */ +// #define CS_PG_SUPPORTED (0x1) /* The cell supports Circuit-Switched paging co-ordination */ + +/* + * Value constants for VAL_ctrl_ack_type + */ +#define VAL_CTRL_ACK_TYPE___0 (0x0) /* default format is four access bursts */ +#define VAL_CTRL_ACK_TYPE___1 (0x1) /* default format is RLC/MAC control block. */ + +/* + * Value constants for VAL_dtm_g_ms_class + */ +#define SUB_CLASS_1 (0x0) /* Sub-Class 1 supported */ +#define SUB_CLASS_5 (0x1) /* Sub-Class 5 supported */ +#define SUP_CLASS_9 (0x2) /* Sub-Class 9 supported */ +#define VAL_DTM_G_MS_CLASS___3 (0x3) /* Reserved */ + +// VALTAB-FF: TI_PS_FF_REL99_AND_ABOVE +// +// Value constants for VAL_dtm_g_high_ms_class +// +// #define VAL_DTM_G_HIGH_MS_CLASS___0 (0x0) /* Reserved */ +// #define SUB_CLASS_31_OR_36 (0x1) /* Multislot class 31 or 36 supported */ +// #define SUB_CLASS_32_OR_37 (0x2) /* Multislot class 32 or 37 supported */ +// #define SUB_CLASS_33_OR_38 (0x3) /* Multislot class 33 or 38 supported */ +// #define SUB_CLASS_41 (0x4) /* Multislot class 41 supported */ +// #define SUB_CLASS_42 (0x5) /* Multislot class 42 supported */ +// #define SUB_CLASS_43 (0x6) /* Multislot class 43 supported */ +// #define SUB_CLASS_44 (0x7) /* Multislot class 44 supported */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_dtm_support +// +// #define DTM_NOT_SUPPORTED (0x0) /* The cell does not support DTM procedures. */ +// #define DTM_SUPPORTED (0x1) /* The cell supports DTM procedures. */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_egprs_packet_channel_request +// +// #define EGPRS_PACKET_CHANNEL_REQUEST_MSG_SENT (0x0) +// #define PACKET_CHANNEL_REQUEST_MSG_SENT (0x1) + +/* + * Value constants for VAL_bands + */ +#define BAND_AUTO (0x0) /* 0b00000000: All bands shall be scanned */ +#define BAND_GSM_900 (0x1) /* 0b00000001: GSM 900 is supported, shall be scanned */ +#define BAND_DCS_1800 (0x2) /* 0b00000010: DCS 1800 is supported, shall be scanned */ +#define BAND_PCS_1900 (0x4) /* 0b00000100: PCS 1900 is supported, shall be scanned */ +#define BAND_E_GSM (0x8) /* 0b00001000: Extended GSM is supported, shall be scanned */ +#define BAND_GSM_850 (0x10) /* 0b00010000: GSM 850 is supported, shall be scanned */ +#define BAND_GSM_450 (0x20) /* 0b00100000: GSM 450 is supported, shall be scanned */ +#define BAND_GSM_480 (0x40) /* 0b01000000: GSM 480 is supported, shall be scanned */ +#define BAND_R_GSM (0x80) /* 0b10000000: R-GSM is supported, shall be scanned */ +#define BAND_DUAL (0x3) /* 0b00000011: GSM 900 and DCS 1800 is supported, shall be scanned */ +#define BAND_DUAL_EXT (0xb) /* 0b00001011: GSM 900, E-GSM and DCS 1800 is supported, shall be scanned */ +#define BAND_DUAL_US (0x14) /* 0b00010100: GSM 850 and PCS 1900 is supported, shall be scanned */ + +/* + * Value constants for VAL_egsm + */ +#define EGSM_NOT_SUPPORTED (0x0) /* The mobile station does not support the extension band. */ +#define EGSM_SUPPORTED (0x1) /* The mobile station does support the extension band (E-GSM or R-GSM). */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_freq_scroll +// +// #define SCROL_NO (0x0) /* Frequency scrolling is not used */ +// #define SCROL_YES (0x1) /* Frequency scrolling is used */ + +/* + * Value constants for VAL_gsm400_supp + */ +#define VAL_GSM400_SUPP___0 (0x0) /* reserved (if neither GSM 480 nor GSM 450 is supported the whole gsm400_struct is omitted) */ +#define GSM480 (0x1) /* GSM 480 supported but GSM 450 not supported */ +#define GSM450 (0x2) /* GSM 450 supported but GSM 480 not supported */ +#define GSM450_480 (0x3) /* GSM 450 supported and GSM 480 supported */ + +/* + * Value constants for VAL_pow_8psk_cap + */ +#define VAL_POW_8PSK_CAP___0 (0x0) /* Reserved */ +#define POWER_CLASS_E1 (0x1) +#define POWER_CLASS_E2 (0x2) +#define POWER_CLASS_E3 (0x3) + +/* + * Value constants for VAL_mod_cap + */ +#define DL_ONLY_8PSK (0x0) /* 8-PSK supported for downlink reception only */ +#define FULL_8PSK (0x1) /* 8-PSK supported for uplink transmission and downlink reception */ + +/* + * Value constants for VAL_mb_value + */ +#define VAL_MB_VALUE___DEF (0x0) /* Reserved */ +#define MB_NO_EUROPEAN_BAND (0x0) /* 0b000: neither GSM 900, E-GSM or DCS 1800 supported */ +#define MB_GSM900 (0x1) /* 0b001: GSM 900 is supported */ +#define MB_EGSM (0x2) /* 0b010: E-GSM is supported */ +#define MB_DCS1800 (0x4) /* 0b100: DCS 1800 is supported */ +#define MB_DUAL (0x5) /* 0b101: GSM 900 and DCS 1800 is supported */ +#define MB_DUAL_EXT (0x6) /* 0b110: E-GSM and DCS 1800 is supported */ + +/* + * Value constants for VAL_ms_class + */ +#define MSLOT_CLASS_1 (0x1) /* Multi Slot Class 1 */ +#define MSLOT_CLASS_2 (0x2) /* Multi Slot Class 2 */ +#define MSLOT_CLASS_3 (0x3) /* Multi Slot Class 3 */ +#define MSLOT_CLASS_4 (0x4) /* Multi Slot Class 4 */ +#define MSLOT_CLASS_5 (0x5) /* Multi Slot Class 5 */ +#define MSLOT_CLASS_6 (0x6) /* Multi Slot Class 6 */ +#define MSLOT_CLASS_7 (0x7) /* Multi Slot Class 7 */ +#define MSLOT_CLASS_8 (0x8) /* Multi Slot Class 8 */ +#define MSLOT_CLASS_9 (0x9) /* Multi Slot Class 9 */ +#define MSLOT_CLASS_10 (0xa) /* Multi Slot Class 10 */ +#define MSLOT_CLASS_11 (0xb) /* Multi Slot Class 11 */ +#define MSLOT_CLASS_12 (0xc) /* Multi Slot Class 12 */ +#define MSLOT_CLASS_13 (0xd) /* Multi Slot Class 13 */ +#define MSLOT_CLASS_14 (0xe) /* Multi Slot Class 14 */ +#define MSLOT_CLASS_15 (0xf) /* Multi Slot Class 15 */ +#define MSLOT_CLASS_16 (0x10) /* Multi Slot Class 16 */ +#define MSLOT_CLASS_17 (0x11) /* Multi Slot Class 17 */ +#define MSLOT_CLASS_18 (0x12) /* Multi Slot Class 18 */ +#define MSLOT_CLASS_19 (0x13) /* Multi Slot Class 19 */ +#define MSLOT_CLASS_20 (0x14) /* Multi Slot Class 20 (not for HSCSD) */ +#define MSLOT_CLASS_21 (0x15) /* Multi Slot Class 21 (not for HSCSD) */ +#define MSLOT_CLASS_22 (0x16) /* Multi Slot Class 22 (not for HSCSD) */ +#define MSLOT_CLASS_23 (0x17) /* Multi Slot Class 23 (not for HSCSD) */ +#define MSLOT_CLASS_24 (0x18) /* Multi Slot Class 24 (not for HSCSD) */ +#define MSLOT_CLASS_25 (0x19) /* Multi Slot Class 25 (not for HSCSD) */ +#define MSLOT_CLASS_26 (0x1a) /* Multi Slot Class 26 (not for HSCSD) */ +#define MSLOT_CLASS_27 (0x1b) /* Multi Slot Class 27 (not for HSCSD) */ +#define MSLOT_CLASS_28 (0x1c) /* Multi Slot Class 28 (not for HSCSD) */ +#define MSLOT_CLASS_29 (0x1d) /* Multi Slot Class 29 (not for HSCSD) */ + +/* + * Value constants for VAL_nmo + */ +#define VAL_NMO___0 (0x0) /* Network Mode 1 */ +#define VAL_NMO___1 (0x1) /* Network Mode 2 */ +#define VAL_NMO___2 (0x2) /* Network Mode 3 */ +#define VAL_NMO___3 (0x3) /* reserved */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_pfc_feature_mode +// +// #define PFC_NOT_SUPPORTED (0x0) /* The network does not support packet flow context procedures. */ +// #define PFC_SUPPORTED (0x1) /* The network supports packet flow context procedures. */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_rep_priority +// +// #define NORMAL_PRIO (0x0) /* Normal reporting priority */ +// #define HIGH_PRIO (0x1) /* High reporting priority */ + +/* + * Value constants for VAL_rf_pow_cap + */ +#define RF_CLASS_1 (0x0) /* class 1 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */ +#define RF_CLASS_2 (0x1) /* class 2 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */ +#define RF_CLASS_3 (0x2) /* class 3 for GSM 850, 900P+E, DCS 1800 and PCS 1900 */ +#define RF_CLASS_4 (0x3) /* class 4 for GSM 850, 900P+E (reserved for DCS 1800 and PCS 1900) */ +#define RF_CLASS_5 (0x4) /* class 5 for GSM 850, 900P+E (reserved for DCS 1800 and PCS 1900) */ +#define VAL_RF_POW_CAP___5 (0x5) /* reserved */ +#define VAL_RF_POW_CAP___6 (0x6) /* reserved */ +#define RF_CLASS_IRRELEVANT (0x7) /* irrelevant for this IE (multiband GSM MS) */ + +/* + * Value constants for VAL_rev_lev + */ +#define VAL_REV_LEV___DEF (0x0) /* Reserved by future use */ +#define REV_LEV_PHASE_1 (0x0) /* Reserved for GSM phase 1 */ +#define REV_LEV_PHASE_2 (0x1) /* Used by GSM phase 2 mobile stations */ +#define REV_LEV_R99_SUPPORT (0x2) /* Used by mobile stations supporting R99 or later versions */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_rev99 +// +// #define PHASE_1 (0x0) /* Release ?98 or older */ +// #define RELEASE99 (0x1) /* Release ?99 onwards */ + +/* + * Value constants for VAL_single_band + */ +#define VAL_SINGLE_BAND___DEF (0x0) /* Reserved */ +#define SINGLE_EGSM (0x0) /* Extended GSM is supported */ +#define SINGLE_GSM900 (0x1) /* GSM 900 is supported */ +#define SINGLE_DCS1800 (0x2) /* DCS 1800 is supported */ +#define SINGLE_GSM450 (0x3) /* GSM 450 is supported */ +#define SINGLE_GSM480 (0x4) /* GSM 480 is supported */ +#define SINGLE_GSM850 (0x5) /* GSM 850 is supported */ +#define SINGLE_PCS1900 (0x6) /* PCS 1900 is supported */ + +/* + * Value constants for VAL_sms_val + */ +#define SM_1 (0x0) /* 1/4 timeslot (~144 micro sec) */ +#define SM_2 (0x1) /* 2/4 timeslot (~288 micro sec) */ +#define SM_3 (0x2) /* 3/4 timeslot (~433 micro sec) */ +#define SM_4 (0x3) /* 4/4 timeslot */ +#define SM_5 (0x4) /* 5/4 timeslot */ +#define SM_6 (0x5) /* 6/4 timeslot */ +#define SM_7 (0x6) /* 7/4 timeslot */ +#define SM_8 (0x7) /* 8/4 timeslot */ +#define SM_9 (0x8) /* 9/4 timeslot */ +#define SM_10 (0x9) /* 10/4 timeslot */ +#define SM_11 (0xa) /* 11/4 timeslot */ +#define SM_12 (0xb) /* 12/4 timeslot */ +#define SM_13 (0xc) /* 13/4 timeslot */ +#define SM_14 (0xd) /* 14/4 timeslot */ +#define SM_15 (0xe) /* 15/4 timeslot */ +#define SM_16 (0xf) /* 16/4 timeslot (~2307 micro sec) */ + +/* + * Value constants for VAL_ss_screen + */ +#define VAL_SS_SCREEN___DEF (0x0) /* for future use (The network shall interpret these values the same as ?1?) */ +#define SS_SCREEN_DEFAULT (0x0) /* default value of phase 1 */ +#define SS_SCREEN_PHASE_2 (0x1) /* capability of handling of ellipsis notation and phase 2 error handling */ + +/* + * Value constants for VAL_ucs2_treat + */ +#define DEFAULT_PREF (0x0) /* the ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. */ +#define NO_PREF (0x1) /* the ME has no preference between the use of the default alphabet and the use of UCS2. */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_rep_offset_900 +// +// #define ZERO_DB (0x0) /* Apply an offset of 0 dB to the reported value */ +// #define SIX_DB (0x1) /* Apply an offset of 6 dB to the reported value */ +// #define TWELVE_DB (0x2) /* Apply an offset of 12 dB to the reported value */ +// #define EIGHTEEN_DB (0x3) /* Apply an offset of 18 dB to the reported value */ +// #define TWENTYFOUR_DB (0x4) /* Apply an offset of 24 dB to the reported value */ +// #define THIRTY_DB (0x5) /* Apply an offset of 30 dB to the reported value */ +// #define THIRTYSIX_DB (0x6) /* Apply an offset of 36 dB to the reported value */ +// #define FORTYTWO_DB (0x7) /* Apply an offset of 42 dB to the reported value */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_th_rep_900 +// +// #define ZERO (0x0) /* Apply priority reporting if the reported value is above 0 dB */ +// #define SIX (0x1) /* Apply priority reporting if the reported value is above 6 dB */ +// #define TWELVE (0x2) /* Apply priority reporting if the reported value is above 12 dB */ +// #define EIGHTEEN (0x3) /* Apply priority reporting if the reported value is above 18 dB */ +// #define TWENTYFOUR (0x4) /* Apply priority reporting if the reported value is above 24 dB */ +// #define THIRTY (0x5) /* Apply priority reporting if the reported value is above 30 dB */ +// #define THIRTYSIX (0x6) /* Apply priority reporting if the reported value is above 36 dB */ +// #define INDEFINITELY (0x7) /* Never apply priority reporting */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_ccn_active +// +// #define VAL_CCN_ACTIVE___0 (0x0) /* The Cell has not enabled CCN procedure.(but if received on PMO/ PCCO then follow the one received on broadcast) */ +// #define VAL_CCN_ACTIVE___1 (0x1) /* The Cell has enabled CCN procedure. */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_nw_ext_ul_tbf +// +// #define EXT_UL_TBF_NOT_SUPPORTED (0x0) /* The network does not support Extended UL TBF procedures. */ +// #define EXT_UL_TBF_SUPPORTED (0x1) /* The network does support Extended UL TBF procedures. */ + +// VALTAB-FF: REL99 +// +// Value constants for VAL_ccn_supported +// +// #define CCN_SUPPORTED (0x0) /* CCN is enabled towards the corresponding cell */ +// #define CCN_NOT_SUPPORTED (0x1) /* CCN is disabled towards the corresponding cell */ + +// VALTAB-FF: TI_PS_FF_REL99_AND_ABOVE +// +// Value constants for VAL_ms_pwr_profile +// +// #define MS_PWR_PROF0 (0x0) /* MULTISLOT_POWER_PROFILE 0 */ +// #define MS_PWR_PROF1 (0x1) /* MULTISLOT_POWER_PROFILE 1 */ +// #define MS_PWR_PROF2 (0x2) /* MULTISLOT_POWER_PROFILE 2 */ +// #define MS_PWR_PROF3 (0x3) /* MULTISLOT_POWER_PROFILE 3 */ + +// VALTAB-FF: TI_PS_FF_REL99_AND_ABOVE +// +// Value constants for VAL_rep_acch_cap +// +// #define REP_DL_FACCH (0x0) /* MS supports Repeated Downlink FACCH */ +// #define REP_SACCH_DL_FACCH (0x1) /* MS supports Repeated SACCH and Repeated Downlink FACCH */ + +// VALTAB-FF: TI_PS_FF_REL99_AND_ABOVE +// +// Value constants for VAL_dl_adv_rx_per +// +// #define DL_ADVANC_RX_PERF_NOT_SUPPORT (0x0) /* Downlink Advanced Receiver Performance not supported */ +// #define DL_ADVANC_RX_PERF_PHASE1_SUPPORT (0x1) /* Downlink Advanced Receiver Performance – phase I supported */ +// #define DL_ADVANC_RX_PERF_RESERVE_VALUE1 (0x2) /* If value is received by the network, they shall be interpreted as ‘01’. */ +// #define DL_ADVANC_RX_PERF_RESERVE_VALUE2 (0x3) /* If value is received by the network, they shall be interpreted as ‘01’. */ + +/* + * user defined constants + */ +#define MAX_ADD_RA_CAP (0x4) +#define MAX_NUM_ACC_TYPE (0x10) +#define MAX_BSIC (0x12) +#define MAX_NNC (0x60) +#define MAXRTDS6 (0x14) +#define MAXRTDS12 (0xa) +#define MAXRTD6 (0x8) +#define MAXRTD12 (0x6) +#define BIT7_MAX (0x80) +#define MAX_TDD_CELLS (0x15) +#define MAX_FDD_CELLS (0x11) +#define MAX_FDD (0x83) +#define MAX_TDD (0x83) +#define MAX_CDMA2K_NEIGH_CELLS (0x40) + +#include "CDG_LEAVE.h" + + +#endif