--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/cdg/sap/udp.sap	Thu Sep 25 08:46:13 2014 +0000
@@ -0,0 +1,789 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- edited with SAPE SAP Editor -->
+<SAP xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="sap.xsd">
+    <DocInfoSection>
+        <DocName DocType="SAP">udp</DocName>
+        <DocNum Number="100" Project="8444"/>
+        <Description>
+            <Section>The Protocol Stacks are used to define the functionality of the GSM protocols for interfaces. The GSM specifications are normative when used to describe the functionality of interfaces, but the stacks and the subdivision of protocol layers does not imply or restrict any implementation.</Section>
+            <Section>The base of the Protocol Stack rests on the physical layer.</Section>
+            <Section>The Data Link Layer (DL) is used to handle an acknowledged connection between mobile and base station. The LAPDm protocol is used.</Section>
+            <Section>Radio Resource (RR) manages the resources of the air-interface. That means configuration of physical layer, cell selection and cell reselection, data transfer, RR-Connection handling.</Section>
+            <Section>Mobility Management (MM) handles registration aspects for the mobile station. It detects changes of location areas and updates a mobile station in the new location area.</Section>
+            <Section>Call Control (CC) provides the call functionality. This includes call establishment, call maintenance procedures like Hold, Retrieve or Modify, and call disconnection.</Section>
+            <Section>Supplementary Services (SS) handles all call independent supplementary services like call forwarding or call barring.</Section>
+            <Section>Short Message Services (SMS) is used for sending and receiving point-to-point short messages. Additionally the reception of cell broadcast short messages is included.</Section>
+            <Section>The man machine interface (MMI) is the interface to the user. Normally it is connected with a keypad as input device and a display as output device.</Section>
+            <Section>Between the several entities data interfaces are defined. These data interfaces are called Service Access Points (SAPs), indicating that an upper layer uses the services of a lower layer.</Section>
+            <Section>The GSM specification do not set out any implementation of the Protocol Stack. The following diagrams show the implementation described in all these documents for the mobile station. All entities except the Man Machine Interface and Physical Layer are implemented as part of the Protocol Stack.</Section>
+            <Section>Figure 1: Mobile-station protocol architecture</Section>
+            <Section>This document describes the services offered by the radio resource management to the mobility management.</Section>
+        </Description>
+        <DocHistory>
+            <DocVersion Number="001" Year="00"/>
+            <Date Day="19" Month="5" Year="2000"/>
+            <Author>SG</Author>
+            <DocStatus State="BEING_PROCESSED"/>
+            <Comment>Initial</Comment>
+        </DocHistory>
+        <DocHistory>
+            <DocVersion Number="002" Year="00"/>
+            <Date Day="31" Month="5" Year="2000"/>
+            <Author>MG</Author>
+            <DocStatus State="BEING_PROCESSED"/>
+            <Comment>Primitive opcodes changed</Comment>
+        </DocHistory>
+        <DocHistory>
+            <DocVersion Number="003" Year="00"/>
+            <Author>Nov</Author>
+            <DocStatus State="BEING_PROCESSED"/>
+            <Comment>Nov-TVO tui removed (for use with DTI2 SAP)</Comment>
+        </DocHistory>
+        <DocHistory>
+            <DocVersion Number="004" Year="00"/>
+            <Date Day="26" Month="3" Year="2002"/>
+            <Author>SG</Author>
+            <DocStatus State="BEING_PROCESSED"/>
+            <Comment>UDP_AUTOASSIGN_PORT Constant added, Type of tui parameter changed</Comment>
+        </DocHistory>
+        <DocHistory>
+            <DocVersion Number="005" Year="00"/>
+            <Date Day="23" Month="9" Year="2002"/>
+            <Author>JK</Author>
+            <DocStatus State="BEING_PROCESSED"/>
+            <Comment>Partial merge from class_ce_int_devbr: tui parameter removed</Comment>
+        </DocHistory>
+        <DocHistory>
+            <DocVersion Number="006" Year="00"/>
+            <Date Day="26" Month="8" Year="2003"/>
+            <Author>JK</Author>
+            <DocStatus State="BEING_PROCESSED"/>
+            <Comment>Nomenclature for dti corrected</Comment>
+        </DocHistory>
+        <DocRef>
+            <RefId>[1]</RefId>
+            <RefTitle>GSM 2.81, Line Identification Supplementary Services - Stage 1 ETS 300 514, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[2]</RefId>
+            <RefTitle>GSM 2.82, Call Forwarding Supplementary Services - Stage 1 ETS 300 515, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[3]</RefId>
+            <RefTitle>GSM 2.83, Call Waiting and Call Hold Supplementary Services - Stage 1 ETS 300 516, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[4]</RefId>
+            <RefTitle>GSM 2.84, Multi Party Supplementary Services - Stage 1 ETS 300 517, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[5]</RefId>
+            <RefTitle>GSM 2.85, Closed User Group Supplementary Services - Stage 1 ETS 300 518, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[6]</RefId>
+            <RefTitle>GSM 2.86, Advice of Charge Supplementary Services - Stage 1 ETS 300 519, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[7]</RefId>
+            <RefTitle>GSM 2.88, Call Barring Supplementary Services - Stage 1 ETS 300 520, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[8]</RefId>
+            <RefTitle>GSM 3.14, Support of Dual Tone Multi Frequency Signalling via the GSM System ETS 300 532, ETSI, April 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[9]</RefId>
+            <RefTitle>GSM 3.40, Technical Realization of the Short Message Service Point-to-Point ETS 300 536, ETSI, January 1996</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[10]</RefId>
+            <RefTitle>GSM 3.41, Technical Realization of Short Message Service Cell Broadcast ETS 300 537, ETSI, June 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[11]</RefId>
+            <RefTitle>GSM 3.81, Line Identification Supplementary Services - Stage 2 ETS 300 542, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[12]</RefId>
+            <RefTitle>GSM 3.82, Call Forwarding Supplementary Services - Stage 2 ETS 300 543, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[13]</RefId>
+            <RefTitle>GSM 3.83, Call Waiting and Call Hold Supplementary Services - Stage 2 ETS 300 544, ETSI, November 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[14]</RefId>
+            <RefTitle>GSM 3.84, Multi Party Supplementary Services - Stage 2 ETS 300 545, ETSI, November 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[15]</RefId>
+            <RefTitle>GSM 3.85, Closed User Group Supplementary Services - Stage 2 ETS 300 546, ETSI, January 1996</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[16]</RefId>
+            <RefTitle>GSM 3.86, Advice of Charge Supplementary Services - Stage 2 ETS 300 547, ETSI, March 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[17]</RefId>
+            <RefTitle>GSM 3.88, Call Barring Supplementary Services - Stage 2 ETS 300 548, ETSI, November 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[18]</RefId>
+            <RefTitle>GSM 4.01, MS-BSS Interface General Aspects and Principles ETS 300 550, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[18a]</RefId>
+            <RefTitle>GSM 4.03, MS-BSS Interface Channel Structures and Access Capabilities ETS 300 552, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[19]</RefId>
+            <RefTitle>GSM 4.05, Data Link Layer General Aspects ETS 300 554, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[20]</RefId>
+            <RefTitle>GSM 4.06, MS-BSS Interface Data Link Layer Specification ETS 300 555, ETSI, September 1994</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[21]</RefId>
+            <RefTitle>GSM 4.07, Mobile Radio Interface Signalling Layer 3 General Aspects ETS 300 556, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[22]</RefId>
+            <RefTitle>GSM 4.08, Mobile Radio Interface Layer 3 Specification ETS 300 557, ETSI, January 1996</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[23]</RefId>
+            <RefTitle>GSM 4.10, Mobile Radio Interface Layer 3 Supplementary Services Specification  General Aspects ETS 300 558, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[24]</RefId>
+            <RefTitle>GSM 4.11, Point-to-Point Short Message Service Support on Mobile Radio Interface ETS 300 559, ETSI, October 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[25]</RefId>
+            <RefTitle>GSM 4.12, Short Message Service Cell Broadcast Support on Mobile Radio Interface ETS 300 560, ETSI, January 1996</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[26]</RefId>
+            <RefTitle>GSM 4.80, Mobile Radio Interface Supplementary Services Specification Formats and Coding ETS 300 564, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[27]</RefId>
+            <RefTitle>GSM 4.81, Line Identification Supplementary Services - Stage 3 ETS 300 565, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[28]</RefId>
+            <RefTitle>GSM 4.82, Call Forwarding Supplementary Services - Stage 3 ETS 300 566, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[29]</RefId>
+            <RefTitle>GSM 4.83, Call Waiting and Call Hold Supplementary Services - Stage 3 ETS 300 567, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[30]</RefId>
+            <RefTitle>GSM 4.84, Multi Party Supplementary Services - Stage 3 ETS 300 568, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[31]</RefId>
+            <RefTitle>GSM 4.85, Closed User Group Supplementary Services - Stage 3 ETS 300 569, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[32]</RefId>
+            <RefTitle>GSM 4.86, Advice of Charge Supplementary Services - Stage 3 ETS 300 570, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[33]</RefId>
+            <RefTitle>GSM 4.88, Call Barring Supplementary Services - Stage 3 ETS 300 571, ETSI, February 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[34]</RefId>
+            <RefTitle>GSM 5.01, Physical Layer on the Radio Path General Description ETS 300 573, ETSI, October 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[35]</RefId>
+            <RefTitle>GSM 5.02, Multiplexing and Multiple Access on the Radio Path ETS 300 574, ETSI, January 1996</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[36]</RefId>
+            <RefTitle>GSM 5.08, Radio Sub-system Link Control ETS 300 578, ETSI, January 1996</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[37]</RefId>
+            <RefTitle>GSM 5.10, Radio Sub-system Synchronisation ETS 300 579, ETSI, October 1995</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[38]</RefId>
+            <RefTitle>Service Access Point MMREG 6147.100.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[39]</RefId>
+            <RefTitle>Service Access Point MNCC 6147.101.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[40]</RefId>
+            <RefTitle>Service Access Point MNSS 6147.102.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[41]</RefId>
+            <RefTitle>Service Access Point MNSMS 6147.103.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[42]</RefId>
+            <RefTitle>Service Access Point MMCC 6147.104.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[43]</RefId>
+            <RefTitle>Service Access Point MMSS 6147.105.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[44]</RefId>
+            <RefTitle>Service Access Point MMSMS 6147.106.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[45]</RefId>
+            <RefTitle>Service Access Point RR 6147.107.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[46]</RefId>
+            <RefTitle>Service Access Point SIM 6147.108.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[47]</RefId>
+            <RefTitle>Service Access Point MPH 6147.109.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[48]</RefId>
+            <RefTitle>Service Access Point DL 6147.110.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[49]</RefId>
+            <RefTitle>Service Access Point MDL 6147.111.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[50]</RefId>
+            <RefTitle>Service Access Point PH 6147.112.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[51]</RefId>
+            <RefTitle>Service Access Point MMI 6147.113.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[52]</RefId>
+            <RefTitle>Message Sequence Charts CC 6147.200.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[53]</RefId>
+            <RefTitle>Message Sequence Charts SS 6147.201.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[54]</RefId>
+            <RefTitle>Message Sequence Charts SMS 6147.202.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[55]</RefId>
+            <RefTitle>Message Sequence Charts MM 6147.203.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[56]</RefId>
+            <RefTitle>Message Sequence Charts RR 6147.204.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[57]</RefId>
+            <RefTitle>Message Sequence Charts DL 6147.205.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[58]</RefId>
+            <RefTitle>Users Guide 6147.300.96.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[59]</RefId>
+            <RefTitle>Test Specification CC 6147.400.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[60]</RefId>
+            <RefTitle>Test Specification SS 6147.401.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[61]</RefId>
+            <RefTitle>Test Specification SMS 6147.402.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[62]</RefId>
+            <RefTitle>Test Specification MM 6147.403.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[63]</RefId>
+            <RefTitle>Test Specification RR 6147.404.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[64]</RefId>
+            <RefTitle>Test Specification DL 6147.405.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[65]</RefId>
+            <RefTitle>Test Specification CCD 6147.406.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[66]</RefId>
+            <RefTitle>SDL Specification CC 6147.500.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[67]</RefId>
+            <RefTitle>SDL Specification SS 6147.501.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[68]</RefId>
+            <RefTitle>SDL Specification SMS 6147.502.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[69]</RefId>
+            <RefTitle>SDL Specification MM 6147.503.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[70]</RefId>
+            <RefTitle>SDL Specification RR 6147.504.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[71]</RefId>
+            <RefTitle>SDL Specification DL 6147.505.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[72]</RefId>
+            <RefTitle>Message Specification CC 6147.600.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[73]</RefId>
+            <RefTitle>Message Specification SS 6147.601.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[74]</RefId>
+            <RefTitle>Message Specification SMS 6147.602.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[75]</RefId>
+            <RefTitle>Message Specification MM 6147.603.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[76]</RefId>
+            <RefTitle>Message Specification RR 6147.604.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[77]</RefId>
+            <RefTitle>Message Specification DL 6147.605.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[78]</RefId>
+            <RefTitle>Technical Documentation CC 6147.700.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[79]</RefId>
+            <RefTitle>Technical Documentation SS 6147.701.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[80]</RefId>
+            <RefTitle>Technical Documentation SMS 6147.702.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[81]</RefId>
+            <RefTitle>Technical Documentation MM 6147.703.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[82]</RefId>
+            <RefTitle>Technical Documentation RR 6147.704.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[83]</RefId>
+            <RefTitle>Technical Documentation DL 6147.705.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+        <DocRef>
+            <RefId>[84]</RefId>
+            <RefTitle>Technical Documentation CCD 6147.706.97.100; Condat GmbH</RefTitle>
+        </DocRef>
+    </DocInfoSection>
+    <PrimitivesSection PrimIDType="BIT32" SAPid="70">
+        <Description>
+            <Section>This section contains all primitives that are defined for the UDP SAP</Section>
+        </Description>
+        <Primitive>
+            <Description>
+                <Section>The UDP_BIND_REQ is used to open an UDP port and attach an DTI2 channel.</Section>
+                <Section>If the port parameter is set to UDP_AUTOASSIGN_PORT, UDP will submit a valid port number in the UDP_BIND_CNF primitive.</Section>
+            </Description>
+            <PrimDef>
+                <Name>UDP_BIND_REQ</Name>
+                <PrimID Direction="UPLINK" Number="0"/>
+                <PrimUsage>
+                    <Sender>UL</Sender>
+                    <Receiver>UDP</Receiver>
+                </PrimUsage>
+            </PrimDef>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>port</Name>
+                </ItemLink>
+                <Comment>port</Comment>
+            </PrimItem>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Primitive>
+        <Primitive>
+            <Description>
+                <Section>The UDP_BIND_CNF is the response of a UDP_BIND_REQ.</Section>
+                <Section>If the port parameter of the UDP_BIND_REQ primitive was zero and, the port parameter of UDP_BIND_CNF is a valid source port number.</Section>
+            </Description>
+            <PrimDef>
+                <Name>UDP_BIND_CNF</Name>
+                <PrimID Direction="DOWNLINK" Number="0"/>
+                <PrimUsage>
+                    <Sender>UDP</Sender>
+                    <Receiver>UL</Receiver>
+                </PrimUsage>
+            </PrimDef>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>port</Name>
+                </ItemLink>
+                <Comment>port</Comment>
+            </PrimItem>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>err</Name>
+                </ItemLink>
+                <Comment>error code</Comment>
+            </PrimItem>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Primitive>
+        <Primitive>
+            <Description>
+                <Section>The UDP_CLOSEPORT_REQ is used to close a UDP port.</Section>
+            </Description>
+            <PrimDef>
+                <Name>UDP_CLOSEPORT_REQ</Name>
+                <PrimID Direction="UPLINK" Number="1"/>
+                <PrimUsage>
+                    <Sender>UL</Sender>
+                    <Receiver>UDP</Receiver>
+                </PrimUsage>
+            </PrimDef>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>port</Name>
+                </ItemLink>
+                <Comment>port</Comment>
+            </PrimItem>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Primitive>
+        <Primitive>
+            <Description>
+                <Section>UDP_CLOSEPORT_CNF is the response of a UDP_CLOSEPORT_REQ, which is sent when the UDP port is closed.</Section>
+            </Description>
+            <PrimDef>
+                <Name>UDP_CLOSEPORT_CNF</Name>
+                <PrimID Direction="DOWNLINK" Number="1"/>
+                <PrimUsage>
+                    <Sender>UDP</Sender>
+                    <Receiver>UL</Receiver>
+                </PrimUsage>
+            </PrimDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Primitive>
+        <Primitive>
+            <Description>
+                <Section>The UDP_ERROR_IND is used to indicate ICMP errors.</Section>
+            </Description>
+            <PrimDef>
+                <Name>UDP_ERROR_IND</Name>
+                <PrimID Direction="DOWNLINK" Number="2"/>
+                <PrimUsage>
+                    <Sender>UDP</Sender>
+                    <Receiver>UL</Receiver>
+                </PrimUsage>
+            </PrimDef>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>dst_port</Name>
+                </ItemLink>
+                <Comment>Destination port</Comment>
+            </PrimItem>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>src_port</Name>
+                </ItemLink>
+                <Comment>source port</Comment>
+            </PrimItem>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>err_msg</Name>
+                </ItemLink>
+                <Comment>error message</Comment>
+            </PrimItem>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>src_addr</Name>
+                </ItemLink>
+                <Comment>source address</Comment>
+            </PrimItem>
+            <PrimItem Presentation="MANDATORY">
+                <ItemLink>
+                    <DocName DocType="SAP">udp</DocName>
+                    <Name>dst_addr</Name>
+                </ItemLink>
+                <Comment>Destination address</Comment>
+            </PrimItem>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Primitive>
+        <Primitive>
+            <Description>
+                <Section>UDP_ERROR_RES is the response of a UDP_ERROR_IND.</Section>
+            </Description>
+            <PrimDef>
+                <Name>UDP_ERROR_RES</Name>
+                <PrimID Direction="UPLINK" Number="2"/>
+                <PrimUsage>
+                    <Sender>UL</Sender>
+                    <Receiver>UDP</Receiver>
+                </PrimUsage>
+            </PrimDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Primitive>
+        <Primitive>
+            <Description>
+                <Section>UDP_SHUTDOWN_IND is used to indicate the deactivation of the entity.</Section>
+            </Description>
+            <PrimDef>
+                <Name>UDP_SHUTDOWN_IND</Name>
+                <PrimID Direction="DOWNLINK" Number="3"/>
+                <PrimUsage>
+                    <Sender>UDP</Sender>
+                    <Receiver>UL</Receiver>
+                </PrimUsage>
+            </PrimDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Primitive>
+        <Primitive>
+            <Description>
+                <Section>UDP_SHUTDOWN_RES is the response of a UDP_SHUTDOWN_IND.</Section>
+            </Description>
+            <PrimDef>
+                <Name>UDP_SHUTDOWN_RES</Name>
+                <PrimID Direction="UPLINK" Number="3"/>
+                <PrimUsage>
+                    <Sender>UL</Sender>
+                    <Receiver>UDP</Receiver>
+                </PrimUsage>
+            </PrimDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Primitive>
+    </PrimitivesSection>
+    <PrimBasicElementsSection>
+        <Description>
+            <Section>Parameters shall be part of the primitives described below and if applied the parameters shall contain the values specified here.</Section>
+        </Description>
+        <PrimBasicElem>
+            <Description>
+                <Section>UDP port.</Section>
+            </Description>
+            <PrimBasicElemDef>
+                <Name>port</Name>
+                <Type>U16</Type>
+                <Comment>destination port</Comment>
+            </PrimBasicElemDef>
+            <ValuesLink>
+                <DocName DocType="SAP">udp</DocName>
+                <Name>VAL_port</Name>
+            </ValuesLink>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </PrimBasicElem>
+        <PrimBasicElem>
+            <Description>
+                <Section>This parameter is used to indicate the success or failure of an UDP_BIND_REQ.</Section>
+            </Description>
+            <PrimBasicElemDef>
+                <Name>err</Name>
+                <Type>U8</Type>
+                <Comment>error code</Comment>
+            </PrimBasicElemDef>
+            <ValuesLink>
+                <DocName DocType="SAP">udp</DocName>
+                <Name>VAL_err</Name>
+            </ValuesLink>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </PrimBasicElem>
+        <PrimBasicElem>
+            <Description>
+                <Section>UDP destination port of an ICMP message.</Section>
+            </Description>
+            <PrimBasicElemDef>
+                <Name>dst_port</Name>
+                <Type>U16</Type>
+                <Comment>destination port</Comment>
+            </PrimBasicElemDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </PrimBasicElem>
+        <PrimBasicElem>
+            <Description>
+                <Section>UDP source port of an ICMP message.</Section>
+            </Description>
+            <PrimBasicElemDef>
+                <Name>src_port</Name>
+                <Type>U16</Type>
+                <Comment>source port</Comment>
+            </PrimBasicElemDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </PrimBasicElem>
+        <PrimBasicElem>
+            <Description>
+                <Section>This parameter indicates the type of the error.</Section>
+            </Description>
+            <PrimBasicElemDef>
+                <Name>err_msg</Name>
+                <Type>U8</Type>
+                <Comment>error message</Comment>
+            </PrimBasicElemDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </PrimBasicElem>
+        <PrimBasicElem>
+            <Description>
+                <Section>Source IP address of an ICMP message.</Section>
+            </Description>
+            <PrimBasicElemDef>
+                <Name>src_addr</Name>
+                <Type>U32</Type>
+                <Comment>source address</Comment>
+            </PrimBasicElemDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </PrimBasicElem>
+        <PrimBasicElem>
+            <Description>
+                <Section>Destination IP address of an ICMP message.</Section>
+            </Description>
+            <PrimBasicElemDef>
+                <Name>dst_addr</Name>
+                <Type>U32</Type>
+                <Comment>destination address</Comment>
+            </PrimBasicElemDef>
+            <History>
+                <Date Day="19" Month="5" Year="2000"/>
+                <Author>SG</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </PrimBasicElem>
+    </PrimBasicElementsSection>
+    <ValuesSection>
+        <Description>
+            <Section>This section contains all sets of values that are defined for the UDP SAP</Section>
+        </Description>
+        <Values>
+            <Description>
+                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
+            </Description>
+            <ValuesDef>
+                <Name>VAL_port</Name>
+                <Comment>values for port</Comment>
+            </ValuesDef>
+            <ValuesItem>
+                <Value ValueType="DEC">0</Value>
+                <Alias>UDP_AUTOASSIGN_PORT</Alias>
+                <Comment>UDP must assign a free port number</Comment>
+            </ValuesItem>
+            <History>
+                <Date Day="5" Month="11" Year="2003"/>
+                <Author>doc2XML</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Values>
+        <Values>
+            <Description>
+                <Section>This former local values table was generated by the doc2XML converter tool. Please exchange this description by a more meaningful one !!!</Section>
+            </Description>
+            <ValuesDef>
+                <Name>VAL_err</Name>
+                <Comment>values for err</Comment>
+            </ValuesDef>
+            <ValuesItem>
+                <Value ValueType="DEC">0</Value>
+                <Alias>UDP_BIND_NOERROR</Alias>
+                <Comment>no error</Comment>
+            </ValuesItem>
+            <ValuesItem>
+                <Value ValueType="DEC">1</Value>
+                <Alias>UDP_BIND_PORTINUSE</Alias>
+                <Comment>port already in use</Comment>
+            </ValuesItem>
+            <ValuesItem>
+                <Value ValueType="DEC">2</Value>
+                <Alias>UDP_BIND_UDPDOWN</Alias>
+                <Comment>udp is deactivated</Comment>
+            </ValuesItem>
+            <History>
+                <Date Day="5" Month="11" Year="2003"/>
+                <Author>doc2XML</Author>
+                <Comment>Initial</Comment>
+            </History>
+        </Values>
+    </ValuesSection>
+</SAP>