--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/finlink/ld-script.src	Tue Nov 12 05:35:48 2013 +0000
@@ -0,0 +1,110 @@
+dnl This ld script source is fed through m4 in order to fill in
+dnl those settings which depend on the configuration.
+dnl Memory region sizes are set in ../include/config.m4, generated
+dnl by the configuration mechanism based on the selected target,
+dnl and the Makefile prepends flash.m4 or xram.m4 to select the
+dnl type of image we are linking: either the regular flashable image,
+dnl or a RAM-only test image (to be loaded via fc-xram) that does not
+dnl touch the flash and pretends as if the flash doesn't even exist.
+
+/*
+ * FreeCalypso ld script for the Buildmem build
+ */
+
+ENTRY(ifelse(Buildmem,XRAM,_FlashorXram_entry,0))
+
+include(`../include/config.m4')dnl
+MEMORY {
+ifelse(Buildmem,FLASH,
+`	FLASH_OVERLAY : ORIGIN = 0, LENGTH = 0x2000
+	FLASH : ORIGIN = 0x2000,    LENGTH = CONFIG_FWFLASH_SIZE - 0x2000')
+	IRAM : ORIGIN = 0x00800000, LENGTH = CONFIG_IRAM_SIZE
+	XRAM : ORIGIN = 0x01000000, LENGTH = CONFIG_XRAM_SIZE
+}
+
+SECTIONS {
+	/* XIP code, going into flash or XRAM emulating flash */
+	xip.text : {
+		*(xip.text*)
+		xipcode.o(.text*)
+		*libplus.xip.a:(.text*)
+		*librv.a:(.text*)
+		*libsprintf.a:(.text*)
+		/* let's put the ARM->Thumb veneers in the XIP section */
+		*(.glue_7)
+	} > Buildmem
+
+	/* copy-to-IRAM code */
+	iram.text 0x80001C : {
+		/* the 7 exception and interrupt vectors @ 0x80001C */
+		*(iram.vectors)
+		*(iram.text*)
+		iramcode.o(.text*)
+		*libplus.iram.a:(.text*)
+		*libc.a:(.text*)
+		*libgcc.a:(.text*)
+	} > IRAM AT> Buildmem
+	__iramtext_ram_addr = ADDR(iram.text);
+	__iramtext_flash_addr = LOADADDR(iram.text);
+	__iramtext_size = SIZEOF(iram.text);
+
+	/* all .rodata will stay in flash */
+	.rodata : {
+		*(.rodata*)
+	} > Buildmem
+
+	/*
+	 * All .data will go into XRAM.
+	 * For the flash build we'll have a step that copies
+	 * the .data section from flash to XRAM; for the RAM-only
+	 * build it goes directly into XRAM and stays there.
+	 */
+	.data : {
+		*(.data*)
+	} > XRAM AT> Buildmem
+ifelse(Buildmem,FLASH,
+`	__initdata_ram_addr = ADDR(.data);
+	__initdata_flash_addr = LOADADDR(.data);
+	__initdata_size = SIZEOF(.data);
+')dnl
+
+	/* we have two kinds of BSS: internal and external */
+	int.bss (NOLOAD) : {
+		*(int.bss*)
+		iramcode.o(.bss* COMMON)
+		*libplus.iram.a:(.bss* COMMON)
+		*libc.a:(.bss* COMMON)
+		*libgcc.a:(.bss* COMMON)
+		. = ALIGN(4);
+	} > IRAM
+	__intbss_start = ADDR(int.bss);
+	__intbss_size = SIZEOF(int.bss);
+
+	ext.bss (NOLOAD) : {
+		*(ext.bss*)
+		xipcode.o(.bss* COMMON)
+		*libplus.xip.a:(.bss* COMMON)
+		*librv.a:(.bss* COMMON)
+		*libsprintf.a:(.bss* COMMON)
+		. = ALIGN(4);
+	} > XRAM
+	__extbss_start = ADDR(ext.bss);
+	__extbss_size = SIZEOF(ext.bss);
+
+	/* finally, we have "raw RAM": like BSS, but we don't zero it out */
+	int.ram (NOLOAD) : {
+		*(int.ram*)
+		*(system_stack)
+		*(irq_stack)
+		*(fiq_stack)
+		*(timer_hisr_stack)
+		. = ALIGN(4);
+		_iram_end = .;
+	} > IRAM
+
+	ext.ram (NOLOAD) : {
+		*(ext.ram*)
+		. = ALIGN(4);
+		_xram_end = .;
+	} > XRAM
+}