--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/serial/init.c	Tue Nov 12 05:35:48 2013 +0000
@@ -0,0 +1,174 @@
+#include "../include/config.h"
+#include "../include/sys_types.h"
+
+#include "serialswitch.h" 
+
+#include <string.h>
+
+/*
+ * Serial Configuration set up.
+ */
+
+/*
+** One config is:
+** {XXX_BT_HCI,         // Bluetooth HCI
+**  XXX_FAX_DATA,       // Fax/Data AT-Cmd
+**  XXX_TRACE,          // L1/Riviera Trace Mux
+**  XXX_TRACE},         // Trace PS
+**
+** with XXX being DUMMY, UART_IRDA or UART_MODEM
+*/
+
+const T_AppliSerialInfo appli_ser_cfg_info = {
+	/*
+	 * Default configuration: set it to the "standard"
+	 * 0x0168, unless the RVTMUX serial channel has been
+	 * moved to the MODEM UART.
+	 */
+	#if CONFIG_RVTMUX_ON_MODEM
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_MODEM_TRACE,
+               DUMMY_TRACE},       // 0x0248
+	#else
+              {DUMMY_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               UART_IRDA_TRACE,
+               DUMMY_TRACE},    // default config = 0x0168
+	#endif
+	/* number of possible configs */
+	#ifdef BTEMOBILE
+             12,	// 12 serial config allowed
+	#else // BTEMOBILE
+             9,	// 9 serial config allowed
+	#endif
+             {
+              // Configs with Condat Panel only
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               DUMMY_TRACE,
+               UART_IRDA_TRACE},   // 0x1048
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               DUMMY_TRACE,
+               UART_MODEM_TRACE},  // 0x2048
+              // Configs with L1/Riviera Trace only
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_IRDA_TRACE,
+               DUMMY_TRACE},       // 0x0148
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_MODEM_TRACE,
+               DUMMY_TRACE},       // 0x0248
+              // Configs with AT-Cmd only
+              {DUMMY_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               DUMMY_TRACE,
+               DUMMY_TRACE},       // 0x0068
+              // Configs with Condat Panel and L1/Riviera Trace
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_MODEM_TRACE,
+               UART_IRDA_TRACE},	 // 0x1248
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_IRDA_TRACE,
+               UART_MODEM_TRACE},	 // 0x2148
+              // Configs with Condat Panel and AT-Cmd
+              {DUMMY_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               DUMMY_TRACE,
+               UART_IRDA_TRACE},   // 0x1068
+	#ifdef BTEMOBILE
+              // Configs with L1/Riviera Trace and Bluetooth HCI
+              {UART_IRDA_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_MODEM_TRACE,
+               DUMMY_TRACE},       // 0x0249
+              {UART_MODEM_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_IRDA_TRACE,
+               DUMMY_TRACE},       // 0x014A
+              // Configs with AT-Cmd and Bluetooth HCI
+              {UART_IRDA_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               DUMMY_TRACE,
+               DUMMY_TRACE},       // 0x0069
+	#endif // BTEMOBILE
+              // Configs with L1/Riviera Trace and AT-Cmd
+              {DUMMY_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               UART_IRDA_TRACE,
+               DUMMY_TRACE}        // 0x0168
+             }
+};
+
+/*
+ * Init_Serial_Flows
+ *
+ * Performs Serialswitch + related serial data flows initialization.
+ */
+
+void Init_Serial_Flows (void)
+{
+  #if 1 //(OP_L1_STANDALONE == 0)
+
+    /*
+     * Initialize Serial Switch module.
+     */
+    #if ((BOARD==35) || (BOARD == 46))
+      SER_InitSerialConfig (GC_GetSerialConfig());
+    #else
+      SER_InitSerialConfig (&appli_ser_cfg_info);
+    #endif
+    /*
+     * Then Initialize the Serial Data Flows and the associated UARTs:
+     *  - G2-3 Trace if GSM/GPRS Protocol Stack
+     *  - AT-Cmd/Fax & Data Flow
+     *
+     * Layer1/Riviera Trace Flow and Bluetooth HCI Flow are initialized
+     * by the appropriate SW Entities.
+     *
+     * G2-3 Trace => No more Used
+     */
+    SER_tr_Init(SER_PROTOCOL_STACK, TR_BAUD_38400, NULL);
+
+    /*
+     * Fax & Data / AT-Command Interpreter Serial Data Flow Initialization
+     */
+
+    #if ((BOARD != 35) && (BOARD != 46))
+      (void) SER_fd_Initialize ();
+    #endif
+  #else    /* OP_L1_STANDALONE */
+
+    #if (TESTMODE || (TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==6) || (TRACE_TYPE==7))
+      #if ((BOARD == 35) || (BOARD == 46))
+        ser_cfg_info[UA_UART_0] = '0';
+      #else
+        ser_cfg_info[UA_UART_0] = 'G';
+      #endif
+      #if (CHIPSET !=15)
+      ser_cfg_info[UA_UART_1] = 'R'; // Riviear Demux on UART MODEM
+      #else
+      ser_cfg_info[UA_UART_0] = 'R'; // Riviear Demux on UART MODEM
+      #endif
+
+      /* init Uart Modem */
+      SER_InitSerialConfig (&appli_ser_cfg_info);
+
+      #if TESTMODE || (TRACE_TYPE == 1) || (TRACE_TYPE == 7)
+        SER_tr_Init (SER_LAYER_1, TR_BAUD_115200, rvt_activate_RX_HISR);
+
+        rvt_register_id("OTHER",&trace_id,(RVT_CALLBACK_FUNC)NULL);
+      #else
+        SER_tr_Init (SER_LAYER_1, TR_BAUD_38400, NULL);
+      #endif
+
+      L1_trace_string(" \n\r");
+
+    #endif   /* TRACE_TYPE */
+
+  #endif   /* OP_L1_STANDALONE */
+}