diff gsm-fw/serial/serialswitch.h @ 143:afceeeb2cba1

Our nuc-fw is destined to become gsm-fw, so I went ahead and did the big hg mv
author Michael Spacefalcon <msokolov@ivan.Harhan.ORG>
date Tue, 12 Nov 2013 05:35:48 +0000
parents nuc-fw/serial/serialswitch.h@28f967578233
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/serial/serialswitch.h	Tue Nov 12 05:35:48 2013 +0000
@@ -0,0 +1,433 @@
+/*******************************************************************************
+ *
+ * SERIALSWITCH.H
+ *
+ * This module allows managing the use of the serial ports of TI GSM Evaluation
+ * Boards.
+ * An application may have to send several serial data flows. The board on which
+ * the application is running may have one or several devices. The purpose of
+ * this module is to establish connections between the serial data flows and the
+ * serial devices at runtime, when the application is started.
+ *
+ * (C) Texas Instruments 1999 - 2003
+ *
+ ******************************************************************************/
+
+#ifndef __SERIALSWITCH_H__
+#define __SERIALSWITCH_H__
+
+#include "../include/config.h"
+#include "../include/sys_types.h"
+
+#include "traceswitch.h"
+#include "faxdata.h"
+
+#ifndef C_EXTERN
+  #if 1 //(OP_L1_STANDALONE)
+    #define C_EXTERN  extern
+  #else
+    #define C_EXTERN
+  #endif
+#endif
+
+/*
+ * Constants used to identify the serial data flows.
+ */
+
+#define SER_FLOW_1  (0)
+#define SER_FLOW_2  (1)
+#define SER_FLOW_3  (2)
+#define SER_FLOW_4  (3)
+
+#define SER_PROTOCOL_STACK (SER_FLOW_1)
+#define SER_LAYER_1        (SER_FLOW_2) 
+#define SER_FAX_DATA       (SER_FLOW_3)
+#define SER_BLUETOOTH_HCI  (SER_FLOW_4)
+
+#define SER_HWTEST         (SER_FLOW_1)
+#define SER_SERIAL_TEST_1  (SER_FLOW_3)
+
+ 
+#define SER_MAX_NUMBER_OF_FLOWS  (4)
+
+#define SER_MAX_NUMBER_OF_CFG  (16)
+
+/*
+ * Type used to define the various drivers configuration
+ * available, according to the UART devices.
+ */
+
+typedef enum {
+    /* Trace Flow */
+    DUMMY_TRACE,             /* = 0 */
+    UART_IRDA_TRACE,         /* = 1 */
+    UART_MODEM_TRACE,        /* = 2 */
+    #if (CHIPSET == 12)
+      UART_MODEM2_TRACE,     /* = 3 */
+    #endif
+    /* AT-Commands/Fax & Data Flow */
+    DUMMY_FAX_DATA = 4,      /* = 4 */
+    /* UART IrDA F&D Driver, not supported - should be = 5 */
+    UART_MODEM_FAX_DATA = 6, /* = 6 */
+    #if (CHIPSET == 12)
+      /* UART Modem2 F&D Driver, not supported - should be = 7 */
+    #endif
+    /* Bluetooth HCI Flow */
+    DUMMY_BT_HCI = 8,        /* = 8 */
+    UART_IRDA_BT_HCI,        /* = 9 */
+    UART_MODEM_BT_HCI        /* = A */
+    #if (CHIPSET == 12)
+      , UART_MODEM2_BT_HCI   /* = B */
+    #endif
+} T_SerialDriver;
+
+/*
+ * Type used to describe a defined serial configuration;
+ * Each field is a 4 bits field representing one serial flow.
+ *
+ * T_DefinedSerialConfig : [ flow_1 | flow_2 | flow_3 | flow_4 ]
+ *                         15    12 11     8  7     4  3     0
+ */
+
+typedef struct {
+
+    unsigned int flow_4 :4;
+    unsigned int flow_3 :4;
+    unsigned int flow_2 :4;
+    unsigned int flow_1 :4;
+    
+} T_DefinedSerialConfig;
+
+
+/*
+ * Type used to describe all serial configuration informations
+ * of a defined application:
+ *     - the default configuration to set up, if the current one is
+ *       not valid,
+ *     - the number of allowed serial configurations,
+ *     - the entire allowed serial configurations.
+ */
+
+typedef struct {
+
+    T_DefinedSerialConfig default_config;
+	SYS_UWORD8         num_config;
+	T_DefinedSerialConfig allowed_config[SER_MAX_NUMBER_OF_CFG];
+
+} T_AppliSerialInfo;
+
+
+/*
+ * Functions prototypes.
+ */
+
+#if (DP==1)
+  void SER_InitSerialConfig (int application_id);
+#else
+  C_EXTERN  void SER_InitSerialConfig (const T_AppliSerialInfo *serial_info);
+#endif //DP
+
+C_EXTERN SYS_BOOL SER_UartSleepStatus (void);
+
+C_EXTERN void SER_WakeUpUarts (void);
+
+void SER_restart_uart_sleep_timer (void);
+
+void SER_activate_timer_hisr (void);
+
+#if (DP==1)
+  void SER_tr_Init (int serial_data_flow,
+                    int baudrate,
+                    void (callback_function (void)));
+#else
+  C_EXTERN  void SER_tr_Init (int serial_data_flow,
+                              T_tr_Baudrate baudrate,
+                              void (callback_function (void)));
+#endif //DP
+
+C_EXTERN SYS_UWORD32 SER_tr_ReadNChars (int serial_data_flow,
+                                        char *buffer,
+                                        SYS_UWORD32 chars_to_read);
+
+C_EXTERN SYS_UWORD32 SER_tr_ReadNBytes (int serial_data_flow,
+                                        char *buffer,
+                                        SYS_UWORD32 chars_to_read,
+                                        SYS_BOOL *eof_detected);
+
+C_EXTERN SYS_UWORD32 SER_tr_WriteNChars (int serial_data_flow,
+                                         char *buffer,
+                                         SYS_UWORD32 chars_to_write);
+
+C_EXTERN SYS_UWORD32 SER_tr_EncapsulateNChars (int serial_data_flow,
+                                               char *buffer,
+                                               SYS_UWORD32 chars_to_write);
+
+C_EXTERN SYS_UWORD32 SER_tr_WriteNBytes (int serial_data_flow,
+                                         SYS_UWORD8 *buffer,
+                                         SYS_UWORD32 chars_to_write);
+
+C_EXTERN void SER_tr_WriteChar (int serial_data_flow,
+                                char character);
+
+C_EXTERN SYS_BOOL SER_tr_EnterSleep (int serial_data_flow);
+
+C_EXTERN void SER_tr_WakeUp (int serial_data_flow);
+
+C_EXTERN void SER_tr_WriteString (int serial_data_flow,
+                                  char *buffer);
+
+#define T_UFRET T_FDRET
+
+#define UF_DEVICE_0 (0)
+
+#define UF_OK             FD_OK
+#define UF_SUSPENDED      FD_SUSPENDED
+#define UF_NOT_SUPPORTED  FD_NOT_SUPPORTED
+#define UF_NOT_READY      FD_NOT_READY
+#define UF_INTERNAL_ERROR FD_INTERNAL_ERR
+
+#define UF_LINE_ON  FD_LINE_ON
+#define UF_LINE_OFF FD_LINE_OFF
+
+#define UF_MAX_BUFFER_SIZE FD_MAX_BUFFER_SIZE
+
+#define UF_BAUD_AUTO   FD_BAUD_AUTO
+#define UF_BAUD_75     FD_BAUD_75
+#define UF_BAUD_150    FD_BAUD_150
+#define UF_BAUD_300    FD_BAUD_300
+#define UF_BAUD_600    FD_BAUD_600
+#define UF_BAUD_1200   FD_BAUD_1200
+#define UF_BAUD_2400   FD_BAUD_2400
+#define UF_BAUD_4800   FD_BAUD_4800
+#define UF_BAUD_7200   FD_BAUD_7200
+#define UF_BAUD_9600   FD_BAUD_9600
+#define UF_BAUD_14400  FD_BAUD_14400
+#define UF_BAUD_19200  FD_BAUD_19200
+#define UF_BAUD_28800  FD_BAUD_28800
+#define UF_BAUD_33900  FD_BAUD_33900
+#define UF_BAUD_38400  FD_BAUD_38400
+#define UF_BAUD_57600  FD_BAUD_57600
+#define UF_BAUD_115200 FD_BAUD_115200
+#define UF_BAUD_203125 FD_BAUD_203125
+#define UF_BAUD_406250 FD_BAUD_406250
+#define UF_BAUD_812500 FD_BAUD_812500
+
+C_EXTERN T_FDRET SER_fd_Init (void);
+
+#if (DP==0)
+  C_EXTERN  T_FDRET SER_fd_Initialize (void);
+#endif
+
+C_EXTERN T_FDRET SER_fd_Enable (SYS_BOOL enable);
+
+C_EXTERN T_FDRET SER_fd_SetComPar (T_baudrate baudrate,
+                                   T_bitsPerCharacter bpc,
+                                   T_stopBits sb,
+                                   T_parity parity);
+
+C_EXTERN T_FDRET SER_fd_SetBuffer (SYS_UWORD16 bufSize,
+                                   SYS_UWORD16 rxThreshold,
+                                   SYS_UWORD16 txThreshold);
+
+C_EXTERN T_FDRET SER_fd_SetFlowCtrl (T_flowCtrlMode fcMode,
+                                     SYS_UWORD8 XON,
+                                     SYS_UWORD8 XOFF);
+
+C_EXTERN T_FDRET SER_fd_SetEscape (char escChar,
+                                   SYS_UWORD16 guardPeriod);
+
+C_EXTERN T_FDRET SER_fd_InpAvail (void);
+
+C_EXTERN T_FDRET SER_fd_OutpAvail (void);
+
+C_EXTERN T_FDRET SER_fd_EnterSleep (void);
+
+C_EXTERN T_FDRET SER_fd_WakeUp (void);
+
+C_EXTERN T_FDRET SER_fd_ReadData (T_suspendMode suspend,
+                                  void (readOutFunc (SYS_BOOL cldFromIrq,
+                                                     T_reInstMode *reInstall,
+                                                     SYS_UWORD8 nsource,
+                                                     SYS_UWORD8 *source[],
+                                                     SYS_UWORD16 size[],
+                                                     SYS_UWORD32 state)));
+
+C_EXTERN T_FDRET SER_fd_WriteData (T_suspendMode suspend,
+                                   void (writeInFunc (SYS_BOOL cldFromIrq,
+                                                      T_reInstMode *reInstall,
+                                                      SYS_UWORD8 ndest,
+                                                      SYS_UWORD8 *dest[],
+                                                      SYS_UWORD16 size[])));
+
+C_EXTERN T_FDRET SER_fd_StopRec (void);
+
+C_EXTERN T_FDRET SER_fd_StartRec (void);
+
+C_EXTERN T_FDRET SER_fd_GetLineState (SYS_UWORD32 *state);
+
+C_EXTERN T_FDRET SER_fd_SetLineState (SYS_UWORD32 state,
+                                      SYS_UWORD32 mask);
+
+#if (DP==0)
+  C_EXTERN T_FDRET SER_fd_CheckXEmpty (void);
+#endif
+
+#ifdef BTEMOBILE
+  C_EXTERN T_HCI_RET SER_bt_Init (void);
+
+  C_EXTERN T_HCI_RET SER_bt_Start (void);
+
+  C_EXTERN T_HCI_RET SER_bt_Stop (void);
+
+  C_EXTERN T_HCI_RET SER_bt_Kill (void);
+
+  C_EXTERN T_HCI_RET SER_bt_SetBaudrate (UINT8 baudrate);
+
+  C_EXTERN T_HCI_RET SER_bt_TransmitPacket (void *uart_sco_tx_buffer);
+
+  C_EXTERN SYS_BOOL  SER_bt_EnterSleep (void);
+
+  C_EXTERN void SER_bt_WakeUp (void);
+#endif
+
+#if ((CHIPSET == 2) || (CHIPSET == 3))
+   C_EXTERN void SER_uart_handler (void);
+#elif ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+   C_EXTERN void SER_uart_modem_handler (void);
+   C_EXTERN void SER_uart_irda_handler (void);
+#endif
+#if (CHIPSET == 12)
+   C_EXTERN void SER_uart_modem2_handler (void);
+#endif
+
+#if (DP==1)
+  T_FDRET UF_Init (int serial_data_flow);
+  T_FDRET UF_Enable (int serial_data_flow,
+                     SYS_BOOL enable);
+  T_FDRET UF_SetComPar (int serial_data_flow,
+                        T_baudrate baudrate,
+                        T_bitsPerCharacter bpc,
+                        T_stopBits sb,
+                        T_parity parity);
+  T_FDRET UF_SetBuffer (int serial_data_flow,
+                        SYS_UWORD16 bufSize,
+                        SYS_UWORD16 rxThreshold,
+                        SYS_UWORD16 txThreshold);
+  T_FDRET UF_SetFlowCtrl (int serial_data_flow,
+                          T_flowCtrlMode fcMode,
+                          SYS_UWORD8 XON,
+                          SYS_UWORD8 XOFF);
+  T_FDRET UF_SetEscape (int serial_data_flow,
+                        char escChar,
+                        SYS_UWORD16 guardPeriod);
+  T_FDRET UF_InpAvail (int serial_data_flow);
+  T_FDRET UF_OutpAvail (int serial_data_flow);
+  T_FDRET UF_ReadData (int serial_data_flow,
+                       T_suspendMode suspend,
+                       void (readOutFunc (SYS_BOOL cldFromIrq,
+                                          T_reInstMode *reInstall,
+                                          SYS_UWORD8 nsource,
+                                          SYS_UWORD8 *source[],
+                                          SYS_UWORD16 size[],
+                                          SYS_UWORD32 state)));
+  T_FDRET UF_WriteData (int uartNo,
+                        T_suspendMode suspend,
+                        void (writeInFunc (SYS_BOOL cldFromIrq,
+                                           T_reInstMode *reInstall,
+                                           SYS_UWORD8 ndest,
+                                           SYS_UWORD8 *dest[],
+                                           SYS_UWORD16 size[])));
+  T_FDRET UF_StopRec (int serial_data_flow);
+  T_FDRET UF_StartRec (int serial_data_flow);
+  T_FDRET UF_GetLineState (int serial_data_flow,
+                           SYS_UWORD32 *state);
+  T_FDRET UF_SetLineState (int serial_data_flow,
+                           SYS_UWORD32 state,
+                           SYS_UWORD32 mask);
+  T_FDRET UF_CheckXEmpty (int serial_data_flow);
+  T_FDRET UF_EnterSleep (int serial_data_flow);
+  T_FDRET UF_WakeUp (int serial_data_flow);
+#endif //DP
+
+/*
+ * Functions used for Dynamic Switch.
+ */
+
+SYS_BOOL SER_WriteConfig (char *new_config,
+                            SYS_BOOL write_to_flash);
+
+SYS_BOOL SER_ImmediateSwitch (void);
+
+/*
+ * Constants and macros used by Condat.
+ * Condat uses a serial device for the protocol stack trace.
+ */
+
+#ifndef __SERIALSWITCH_C__
+
+#define UT_DEVICE_0 (0)
+
+#define UT_BAUD_406250 TR_BAUD_406250
+#define UT_BAUD_115200 TR_BAUD_115200
+#define UT_BAUD_57600  TR_BAUD_57600
+#define UT_BAUD_38400  TR_BAUD_38400
+#define UT_BAUD_33900  TR_BAUD_33900
+#define UT_BAUD_28800  TR_BAUD_28800
+#define UT_BAUD_19200  TR_BAUD_19200
+#define UT_BAUD_14400  TR_BAUD_14400
+#define UT_BAUD_9600   TR_BAUD_9600
+#define UT_BAUD_4800   TR_BAUD_4800
+#define UT_BAUD_2400   TR_BAUD_2400
+#define UT_BAUD_1200   TR_BAUD_1200
+#define UT_BAUD_600    TR_BAUD_600
+#define UT_BAUD_300    TR_BAUD_300
+#define UT_BAUD_150    TR_BAUD_150
+#define UT_BAUD_75     TR_BAUD_75
+
+#define UT_Init(A,B,C) SER_tr_Init (SER_PROTOCOL_STACK, B, C)
+
+#define UT_ReadNChars(A,B,C) SER_tr_ReadNChars (SER_PROTOCOL_STACK, B, C)
+
+#define UT_WriteNChars(A,B,C) SER_tr_WriteNChars (SER_PROTOCOL_STACK, B, C)
+
+#define UT_WriteChar(A,B) SER_tr_WriteChar (SER_PROTOCOL_STACK, B)
+
+#define UT_WriteString(A,B) SER_tr_WriteString (SER_PROTOCOL_STACK, B)
+
+#if (DP==0)
+  #define UF_Init(A) SER_fd_Init ()
+
+  #define UF_Enable(A,B) SER_fd_Enable (B)
+
+  #define UF_SetComPar(A,B,C,D,E) SER_fd_SetComPar (B, C, D, E)
+
+  #define UF_SetBuffer(A,B,C,D) SER_fd_SetBuffer (B, C, D)
+
+  #define UF_SetFlowCtrl(A,B,C,D) SER_fd_SetFlowCtrl (B, C, D)
+
+  #define UF_SetEscape(A,B,C) SER_fd_SetEscape (B, C)
+
+  #define UF_InpAvail(A) SER_fd_InpAvail ()
+
+  #define UF_OutpAvail(A) SER_fd_OutpAvail ()
+
+  #define UF_ReadData(A,B,C) SER_fd_ReadData (B, C)
+
+  #define UF_WriteData(A,B,C) SER_fd_WriteData (B, C)
+
+  #define UF_StopRec(A) SER_fd_StopRec()
+
+  #define UF_StartRec(A) SER_fd_StartRec ()
+
+  #define UF_GetLineState(A,B) SER_fd_GetLineState (B) 
+
+  #define UF_SetLineState(A,B,C) SER_fd_SetLineState (B, C)
+
+  #define UF_CheckXEmpty(A) SER_fd_CheckXEmpty ()
+#endif //DP
+
+#endif /* __SERIALSWITCH_C__ */
+
+#undef C_EXTERN
+
+#endif /* __SERIALSWITCH_H__ */