--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nuc-fw/cfgmagic/post-target	Fri Aug 23 02:02:59 2013 +0000
@@ -0,0 +1,86 @@
+# This shell script fragment is sourced after the selected target.
+# Here we'll put code that logically goes with the target hw-related
+# stuff, but which we wish to avoid duplicating in every target.*
+# fragment.
+
+# The per-target fragment must have defined CONFIG_IRAM_SIZE, CONFIG_XRAM_SIZE
+# and CONFIG_FWFLASH_SIZE.
+if [ -z "$CONFIG_IRAM_SIZE" ]
+then
+	echo "Error: target.$TARGET failed to define CONFIG_IRAM_SIZE" 1>&2
+	exit 1
+fi
+
+if [ -z "$CONFIG_XRAM_SIZE" ]
+then
+	echo "Error: target.$TARGET failed to define CONFIG_XRAM_SIZE" 1>&2
+	exit 1
+fi
+
+if [ -z "$CONFIG_FWFLASH_SIZE" ]
+then
+	echo "Error: target.$TARGET failed to define CONFIG_FWFLASH_SIZE" 1>&2
+	exit 1
+fi
+
+# export them to C and to the m4-based ld script generation logic
+export_to_c	CONFIG_IRAM_SIZE
+export_to_m4	CONFIG_IRAM_SIZE
+export_to_c	CONFIG_XRAM_SIZE
+export_to_m4	CONFIG_XRAM_SIZE
+export_to_c	CONFIG_FWFLASH_SIZE
+export_to_m4	CONFIG_FWFLASH_SIZE
+
+# Because we'll be using a lot of TI's code that is very liberally sprinkled
+# with conditionals on their voodoo numbers for CHIPSET etc, we really have
+# no choice but to continue using these nasty numbers, at least where
+# possible.
+
+if [ -z "$DBB_type" ]
+then
+	echo "Error: target.$TARGET failed to define DBB_type" 1>&2
+	exit 1
+fi
+
+case "$DBB_type" in
+	751992*)
+		# This is the only Calypso variant we currently work with,
+		# and we have no authoritative knowledge of the correct
+		# CHIPSET number - only a current best guess.
+		CHIPSET=10
+		# let's hope for the best
+		;;
+	*)
+		echo "Error: unknown DBB_type=$DBB_type" 1>&2
+		exit 1
+		;;
+esac
+export_to_c	CHIPSET
+
+if [ -z "$ABB_type" ]
+then
+	echo "Error: target.$TARGET failed to define ABB_type" 1>&2
+	exit 1
+fi
+
+case "$ABB_type" in
+	Iota*)
+		ANLG_FAM=2
+		;;
+	Syren*)
+		ANLG_FAM=3
+		;;
+	*)
+		echo "Error: unknown ABB_type=$ABB_type" 1>&2
+		exit 1
+		;;
+esac
+export_to_c	ANLG_FAM
+
+# Ensure that device_class is set - various feature configurations
+# will certainly depend on it.
+if [ -z "$device_class" ]
+then
+	echo "Error: target.$TARGET failed to define device_class" 1>&2
+	exit 1
+fi