--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/L1/cust1/l1_rf61.h	Thu Jul 10 03:43:04 2014 +0000
@@ -0,0 +1,577 @@
+/************* Revision Controle System Header *************
+ *                  GSM Layer 1 software
+ *
+ *        Filename l1_rf61.h
+ *        Version  1.0
+ *        Date     June 16th, 2005
+ *
+ ************* Revision Controle System Header *************/
+
+#ifndef __L1_RF_H__
+#define __L1_RF_H__
+
+#if (ANLG_FAM == 11)
+#include "bspTwl3029_Madc.h"
+#endif
+
+#define RF_LOCOSTO 0x2050 // Check with TIDK
+
+//LNA Specific BAND Index Settings
+#define RF_QUADBAND 0 //Default Setting 850, EGSM,DCS,PCS
+#define RF_EU_TRIBAND 1 //  EGSM,DCS,PCS
+#define RF_EU_DUALBAND 2 //  EGSM,DCS
+#define RF_US_TRIBAND 3  // 850,DCS,PCS
+#define RF_US_DUALBAND 4 //850, PCS
+#define RF_PCS1900_900_DUALBAND 5 // EGSM, PCS
+#define RF_DCS1800_850_DUALBAND 6 //850, DCS
+
+#define RF_BAND_SYSTEM_INDEX RF_QUADBAND //for other PCB's Please redefine here.
+#define RF_LNA_MASK 0x0003 // Reuse last 2 bits from
+
+//End LNA Changes
+
+//#define RF_HW_BAND_EGSM
+//#define RF_HW_BAND_DCS
+#define RF_HW_BAND_PCS 0x4
+#define RF_HW_BAND_DUAL_US  0x80
+#define RF_HW_BAND_DUAL_EXT 0x20
+#define RF_HW_BAND_SUPPORT (RF_HW_BAND_DUAL_EXT)
+
+/************************************/
+/* SYNTHESIZER setup time... */
+/************************************/
+#define RX_SYNTH_SETUP_TIME (PROVISION_TIME - TRF_R1) //RX Synthesizer setup time in qbit.
+#define TX_SYNTH_SETUP_TIME (- TRF_T1)               //TX Synthesizer setup time in qbit.
+
+/************************************/
+/* Time for TPU scenario ending...  */
+/************************************/
+//
+// The following values are used to take into account any TPU activity AFTER
+// BDLON (or BDLENA) down (for RX) and BULON down (for TX)
+// - If there are no TPU commands after BDLON (or BDLENA) down and BULON down,
+//   these defines must be ZERO
+// - If there IS some TPU command after BDLON (or BDLENA) and BULON down,
+//   these defines must be equal to the time difference (in qbits) between
+//   the BDLON (or BDLENA) or BULON time and the last TPU command on
+//   the TPU scenario
+#define RX_TPU_SCENARIO_ENDING  6   // execution time of AFTER BDLENA down	   last value : 0
+#define TX_TPU_SCENARIO_ENDING  0   // execution time of AFTER BULON down	   last value : 14
+
+
+/******************************************************/
+/* TXPWR configuration...                             */
+/* Fixed TXPWR value when GSM management is disabled. */
+/******************************************************/
+#if ( ANLG_FAM == 11)
+  #define FIXED_TXPWR       0x5C // TXPWR=500 for the moment...change later TEMP_FIX
+#endif
+
+
+/************************************/
+/* RF  delay (in qbits)             */
+/************************************/
+#define  DL_DELAY_RF      0   // time spent in the Downlink global RF chain by the modulated signal
+#define  UL_DELAY_1RF     0   // time spent in the first  uplink RF block
+#define  UL_DELAY_2RF     0   // time spent in the second uplink RF block
+
+#define  UL_ABB_DELAY   12   // 12 for RF output DELAY
+
+#define GUARD_BITS 5
+
+/************************************/
+/* TX Propagation delay...          */
+/************************************/
+#define  PRG_TX       (DL_DELAY_RF + UL_DELAY_2RF + (GUARD_BITS*4) + UL_DELAY_1RF + UL_ABB_DELAY)   // = 50
+
+/************************************/
+/* Initial value for APC DELAY     */
+/************************************/
+#define APCDEL_DOWN     (0)                        // To add this value, the setup delay minimum value: 2	  last value : 0
+//SG #define APCDEL_UP       (12)
+#define APCDEL_UP       (0)                        //To add this value, the setup delay minimum value: 6
+#define C_APCDEL1       (((APCDEL_DOWN & 0x1f)<<5)  |(APCDEL_UP & 0x1f) )
+#define C_APCDEL2       (((APCDEL_DOWN & 0x3e0)) |((APCDEL_UP>>5) & 0x1f) )
+
+
+/************************************/
+/* Initial value for AFC...         */
+/************************************/
+#define  EEPROM_AFC    ((150)*8)    // F14.2 required!!!!! (default : -952*8, initial deviation of -2400 forced)
+
+#if(CHIPSET == 15)
+	#define  SETUP_AFC_AND_RF     0
+#else
+	#define  SETUP_AFC_AND_RF     6       // AFC converges in 2 frames and RF BAND GAP stable after 4 frames
+#endif
+#define  C_DRP_DCXO_XTAL_DSP_ADDRESS   0x7F80  // DRP DCXO XTAL DSP address
+
+/************************************/
+/* DCO Registers Initialization      */
+/************************************/
+#define C_DCO_SAMPLES_PER_SYMBOL  1
+/* The basic frequency table in DSP is approximately 2.115KHz (26MHZ/(512*24))
+ * The FCW value needs to intended IF Frequency / 2.115KHZ.
+ * Hence since IF is 100KFZ, FCW = 100 / 2.115 ~= 47 */
+#define C_DCO_FCW                 47
+
+/***************************************************************
+ * Threshold between LIF_100 KHZ (at high power levels) and
+ * LIF_120KHz (at low power level)
+ * the threshold defintion for GSM and GPRS is as given below
+ * ************************************************************ */
+#define C_IF_ZERO_LOW_THRESHOLD_GSM   180  // if IL < -90dbm use Zero IF else Low IF STd L1 format
+#define C_IF_ZERO_LOW_THRESHOLD_GPRS   180  // if IL < -90dbm use Zero IF else Low IF STd L1 format
+
+/* Since CSF filter coefficients are changed in accordance with GENIE
+ * algorithm, below are values programmed in DRP to select HW/SW CSF filter */
+#define CSF_CWL_HARDWARE_FILTER_64TAP      0x0100
+#define CSF_CWL_PROGRAMMABLE_FILTER_64TAP  0x0000
+
+/* Below are the attenuation losses to be compensated for LIF_100KHZ and LIF_120KHZ Path
+ * !!!! Note: The below attenuations are applicable when ROC is enabled  !!!! */
+#define SCF_ATTENUATION_LIF_100KHZ  (0) /* value of 0 represents 0dB attenuation as per L1 F7.1 format */
+#define SCF_ATTENUATION_LIF_120KHZ  (1) /* value of 1 represents 0.5dB attenuation */
+#define SCF_ATTENUATION_ZIF         (0) /* No attenuation when ZIF mode is used */
+
+
+/************************************/
+/* DRP Retiming Related             */
+/************************************/
+#define C_RETIMING_DISABLED 0x0
+#define C_RETIMING_ENABLED  0x1
+
+#define C_RETIMING_CONFIG C_RETIMING_DISABLED
+
+/*************************************/
+/*      DRP WRAPPER Initialization   */
+/*************************************/
+#define C_APCCTRL2             0x05C8   // BGEN=1, APCOFF=64, APC_LDO_EN=0, MODE=0
+// SG #define C_APCCTRL2             0x01FC
+#define DRP_DBB_RX_IRQ_COUNT   16
+
+#define TTY_L1_STANDALONE 0
+
+/************************************/
+/* Triton audio initialize          */
+/************************************/
+#if (ANLG_FAM == 11)
+#if (TTY_L1_STANDALONE == 1)
+  #define  C_VULGAIN       0x10 // -12dB
+//  #define  C_VULGAIN       0x09 // voice uplink gain set to 7dB
+  #define  C_SIDETONE      0x0d // -23dB
+//  #define  C_SIDETONE      0x0f // side tone set to MUTE
+  #define  C_VDLGAIN       0x4c //
+//  #define  C_VDLGAIN       0x2c // set PGA gain to 2dB
+  #define  C_CTRL1         0x30 // MicBias = 1, DL Filter Bypass
+//  #define  C_CTRL1         0x00 // VSYNC = 1, reset Dig Modulator, VSP, Digital filter
+  #define  C_CTRL2         0x10 //
+//  #define  C_CTRL2         0x00 // reset value
+  #define  C_CTRL3         0x25 // MIC IN (diff), MICIP, MICIN. Amplifier: MIC AMP, Gain = 25.6 dB, SPKAMP = +2.5 dB
+  #define  C_CTRL4         0x00 // reset value
+  #define  C_CTRL5         0x28 // SAMP FREQ = 48Khz, EARAMP = 1 dB
+  #define  C_CTRL6         0x00 // reset value
+  #define  C_POPAUTO       0x01 // POPmode set to/Automatic mode
+  #define  C_OUTEN1        0x12 // Audio left/Audio Mono, Audio Right/ Audio mono
+  #define  C_OUTEN2        0x05 // EAR= voice speech, AUXO = voice speech
+  #define  C_OUTEN3        0x01 // SPK = voice speech
+  #define  C_AULGA         0x00 // reset value
+  #define  C_AURGA         0x00 // reset value
+#else
+  #define  C_VULGAIN       0x09 // voice uplink gain set to 7dB
+  #define  C_SIDETONE      0x06 // side tone set to MUTE
+  #define  C_VDLGAIN       0x2c // set PGA gain to 2dB
+  #define  C_CTRL1         0x00 // VSYNC = 1, reset Dig Modulator, VSP, Digital filter
+  #define  C_CTRL2         0x00 // reset value
+  #define  C_CTRL3         0x21 // MIC IN (diff), MICIP, MICIN. Amplifier: MIC AMP, Gain = 25.6 dB, SPKAMP = +2.5 dB
+  #define  C_CTRL4         0x00 // reset value
+  #define  C_CTRL5         0x28 // SAMP FREQ = 48Khz, EARAMP = 1 dB
+  #define  C_CTRL6         0x00 // reset value
+  #define  C_POPAUTO       0x01 // POPmode set to/Automatic mode
+  #define  C_OUTEN1        0x24 // Audio left/Audio Mono, Audio Right/ Audio mono
+  #define  C_OUTEN2        0x01 // EAR= voice speech, AUXO = voice speech
+  #define  C_OUTEN3        0x01 // SPK = voice speech
+  #define  C_AULGA         0x00 // reset value
+  #define  C_AURGA         0x00 // reset value
+#endif   //(L1_GTT == 1)
+#endif   //(ANLG_FAM == 11)
+
+/************************************/
+/* Automatic frequency compensation */
+/************************************/
+/********************* C_Psi_sta definition *****************************/
+/* C_Psi_sta = (2*pi*Fr)        / (N * Fb)                              */
+/*      (1)  = (2*pi*V*ppm*0.9) / (N*V*Fb)                              */
+/*           regarding Vega V/N   = 2.4/4096                            */
+/*           regarding VCO  ppm/V = 16 / 1   (average slope of the VCO) */
+/*      (1)  = (2*pi*2.4*16*0.9) / (4096*1*270.83)                      */
+/*           = 0.000195748                                              */
+/* C_Psi_sta_inv = 1/C_Psi_sta = 5108                                   */
+/************************************************************************/
+#define  C_Psi_sta_inv    6142L		// 12902L    // (1/C_Psi_sta)
+#define  C_Psi_st         9L		// 4L        // C_Psi_sta * 0.8 F0.16
+#define  C_Psi_st_32      559386L	// 266313L  // F0.32
+#define  C_Psi_st_inv     7678L		// 16128L   // (1/C_Psi_st)
+
+#if (VCXO_ALGO == 1)
+// Linearity parameters
+  #define  C_AFC_DAC_CENTER     ((4264))	//((-1242)*8)
+  #define  C_AFC_DAC_MIN        ((-11128))	//((-2000)*8)
+  #define  C_AFC_DAC_MAX        ((19656))	//((1419)*8)
+  #define  C_AFC_SNR_THR        2560     //  1/0.4    * 2**10
+#endif
+
+typedef struct
+{
+  WORD16  eeprom_afc;
+  UWORD32 psi_sta_inv;
+  UWORD32 psi_st;
+  UWORD32 psi_st_32;
+  UWORD32 psi_st_inv;
+
+  #if (VCXO_ALGO)
+  // VCXO adjustment parameters
+  // Parameters used when assuming linearity
+  WORD16  dac_center;
+  WORD16  dac_min;
+  WORD16  dac_max;
+  WORD16  snr_thr;
+#endif
+}
+T_AFC_PARAMS;
+
+/************************************/
+/* Swap IQ definitions...           */
+/************************************/
+/* 0=No Swap, 1=Swap RX only, 2=Swap TX only, 3=Swap RX and TX */
+#define  SWAP_IQ_GSM    0
+#define  SWAP_IQ_DCS    0
+#define  SWAP_IQ_PCS    0
+#define  SWAP_IQ_GSM850 0   // Swap TX compared to GSM 900
+
+#define LNA_OFF (1)
+#define LNA_ON (0)
+/************************************/
+/************************************/
+// typedef
+/************************************/
+/************************************/
+
+/*************************************************************/
+/* Define structure for apc of TX Power                 ******/
+/*************************************************************/
+typedef struct
+{ // pcm-file "rf/tx/level.gsm|dcs"
+  UWORD16 apc;            // 0..31
+  UWORD8  ramp_index;     // 0..RF_TX_RAMP_SIZE
+  UWORD8  chan_cal_index; // 0..RF_TX_CHAN_CAL_TABLE_SIZE
+}
+T_TX_LEVEL;
+
+/************************************/
+/* Automatic Gain Control           */
+/************************************/
+/* Define structure for sub-band definition of TX Power ******/
+typedef struct
+   {
+   UWORD16   upper_bound;    //highest physical arfcn of the sub-band
+   WORD16    agc_calib;      // AGC  for each TXPWR
+   } T_RF_AGC_BAND;
+
+/************************************/
+/*       Ramp definitions           */
+/************************************/
+
+  typedef struct
+  {
+    UWORD8 ramp_up     [20];  // Ramp-up profile
+    UWORD8 ramp_down   [20];  // Ramp-down profile
+  }
+  T_TX_RAMP;
+
+
+// RF structure definition
+//========================
+#if (L1_FF_MULTIBAND == 0)
+// Number of bands supported
+#define GSM_BANDS 2
+
+#define MULTI_BAND1     0
+#define MULTI_BAND2     1
+#else
+#endif
+
+// RF table sizes
+#define RF_RX_CAL_CHAN_SIZE 10 // number of AGC sub-bands
+#define RF_RX_CAL_TEMP_SIZE 11 // number of temperature ranges
+
+#define RF_TX_CHAN_CAL_TABLE_SIZE  4 // channel calibration table size
+#define RF_TX_NUM_SUB_BANDS        8 // number of sub-bands in channel calibration table
+#define RF_TX_LEVELS_TABLE_SIZE   32 // level table size
+#define RF_TX_RAMP_SIZE           16 // number of ramp definitions
+#define RF_TX_CAL_TEMP_SIZE        5 // number of temperature ranges
+
+#define AGC_TABLE_SIZE            24
+#define MIN_AGC_INDEX              0  // size step for AGC table
+
+#define TEMP_TABLE_SIZE          131 // number of elements in ADC->temp conversion table
+#if (REL99 && FF_PRF)
+  #define MAX_UPLINK_TIME_SLOT     4 // max number of time slot in uplink
+#endif
+
+
+// RX parameters and tables
+//-------------------------
+
+// AGC parameters and tables
+typedef struct
+{
+  UWORD16 low_agc_noise_thr;
+  UWORD16 high_agc_sat_thr;
+  UWORD16 low_agc;
+  UWORD16 high_agc;
+  UWORD8  il2agc_pwr[121];
+  UWORD8  il2agc_max[121];
+  UWORD8  il2agc_av[121];
+}
+T_AGC;
+
+// Calibration parameters
+typedef struct
+{
+  UWORD16 g_magic;
+  UWORD16 lna_att;
+  UWORD16 lna_switch_thr_low;
+  UWORD16 lna_switch_thr_high;
+}
+T_RX_CAL_PARAMS;
+
+// RX temperature compensation
+typedef struct
+{
+  WORD16 temperature;
+  WORD16 agc_calib;
+}
+T_RX_TEMP_COMP;
+
+// RF RX structure
+typedef struct
+{
+  T_AGC              agc;
+}
+T_RF_RX; //common
+
+// RF RX structure
+typedef struct
+{
+  T_RX_CAL_PARAMS rx_cal_params;
+  T_RF_AGC_BAND   agc_bands[RF_RX_CAL_CHAN_SIZE];
+  T_RX_TEMP_COMP  temp[RF_RX_CAL_TEMP_SIZE];
+}
+T_RF_RX_BAND;
+
+
+// TX parameters and tables
+//-------------------------
+
+// TX temperature compensation
+typedef struct
+{
+  WORD16 temperature;
+  #if (ORDER2_TX_TEMP_CAL==1)
+  WORD16 a;
+  WORD16 b;
+  WORD16 c;
+  #else
+  WORD16 apc_calib;
+  #endif
+}
+T_TX_TEMP_CAL;
+
+// Ramp up and ramp down delay
+typedef struct
+{
+  UWORD16 up;
+  UWORD16 down;
+}
+T_RAMP_DELAY;
+
+typedef struct
+{
+  UWORD16 arfcn_limit;
+  WORD16  chan_cal;
+}
+T_TX_CHAN_CAL;
+
+// RF TX structure
+typedef struct
+{
+  T_RAMP_DELAY   ramp_delay;
+  UWORD8         guard_bits;  // number of guard bits needed for ramp up
+  UWORD8         prg_tx;
+}
+T_RF_TX; //common
+
+// RF TX structure
+typedef struct
+{
+  T_TX_LEVEL           levels[RF_TX_LEVELS_TABLE_SIZE];
+  #if (REL99 && FF_PRF)
+    T_TX_LEVEL         levels_power_reduction[MAX_UPLINK_TIME_SLOT];
+  #endif
+  T_TX_CHAN_CAL  chan_cal_table[RF_TX_CHAN_CAL_TABLE_SIZE][RF_TX_NUM_SUB_BANDS];
+  T_TX_RAMP            ramp_tables[RF_TX_RAMP_SIZE];
+  T_TX_TEMP_CAL        temp[RF_TX_CAL_TEMP_SIZE];
+}
+T_RF_TX_BAND;
+
+// band structure
+typedef struct
+{
+  T_RF_RX_BAND  rx;
+  T_RF_TX_BAND  tx;
+  UWORD8        swap_iq;
+}
+T_RF_BAND;
+
+// RF structure
+typedef struct
+{
+  // common for all bands
+  UWORD16      rf_revision;
+  UWORD16      radio_band_support;
+  T_RF_RX      rx;
+  T_RF_TX      tx;
+  T_AFC_PARAMS afc;
+}
+T_RF;
+
+/************************************/
+/*       MADC definitions           */
+/************************************/
+// TRITON: 5 external channels
+enum ADC_INDEX {
+  ADC_ADIN1,
+  ADC_ADIN2,
+  ADC_ADIN3,
+  ADC_BATT_TYPE,
+  ADC_BTEMP,
+  ADC_USBVBUS   ,
+  ADC_VBKP,
+  ADC_ICHG,
+  ADC_VCHG,
+  ADC_VBAT,
+  ADC_HOTDIE   ,
+  ADC_RFTEMP,
+  ADC_INDEX_END // ADC_INDEX_END must be the end of the enums
+};
+
+
+typedef struct
+{
+    WORD16 converted[ADC_INDEX_END]; // converted
+    UWORD16 raw[ADC_INDEX_END];       // raw from ADC
+}
+T_ADC;
+
+
+/************************************/
+/*       MADC calibration           */
+/************************************/
+typedef struct
+{
+   UWORD16 a[ADC_INDEX_END];
+   WORD16 b[ADC_INDEX_END];
+}
+T_ADCCAL;
+
+// Conversion table: ADC value -> temperature
+typedef struct
+{
+    UWORD16 adc;  // ADC reading is 10 bits
+    WORD16  temp; // temp is in approx. range -30..+80
+}
+T_TEMP;
+
+typedef struct
+{
+    char *name;
+    void *addr;
+    int  size;
+}
+T_CONFIG_FILE;
+
+#if (L1_FF_MULTIBAND == 0)
+
+    typedef struct
+    {
+      char      *name;         // name of ffs file suffix
+      T_RF_BAND *addr;         // address to default flash structure
+      UWORD16   max_carrier;  // max carrier
+      UWORD16   max_txpwr;    // max tx power
+    }
+    T_BAND_CONFIG;
+
+typedef struct
+{
+  UWORD8  band[GSM_BANDS]; // index to band address
+  UWORD8  txpwr_tp; // tx power turning point
+  UWORD16 first_arfcn;  // first index
+}
+T_STD_CONFIG;
+
+enum GSMBAND_DEF
+{
+  BAND_NONE,
+  BAND_EGSM900,
+  BAND_DCS1800,
+  BAND_PCS1900,
+  BAND_GSM850,
+  // put new bands here
+  BAND_GSM900  //last entry
+};
+#endif // L1_FF_MULTIBAND == 0
+
+/************************************/
+/* ABB (TRITON) Initialization       */
+/************************************/
+
+/* ABB_TABLE_SIZE definitions for Triton */
+#if (ANLG_FAM == 11)
+   #define ABB_TABLE_SIZE 15
+#endif
+
+/* ABB enum definitions for TRITON */
+#if (ANLG_FAM == 11)
+  enum ABB_REGISTERS {
+    ABB_VULGAIN = 0,
+    ABB_VDLGAIN,
+    ABB_SIDETONE,
+    ABB_CTRL1,
+    ABB_CTRL2,
+    ABB_CTRL3,
+    ABB_CTRL4,
+    ABB_CTRL5,
+    ABB_CTRL6,
+    ABB_POPAUTO,
+    ABB_OUTEN1,
+    ABB_OUTEN2,
+    ABB_OUTEN3,
+    ABB_AULGA,
+    ABB_AURGA
+  };
+#endif
+
+/*************************************/
+/*      DRP WRAPPER Table            */
+/*************************************/
+ #define DRP_WRAPPER_TABLE_SIZE 3
+
+enum DRP_WRAPPER_REGISTERS {
+    DRP_WRAPPER_APCCTRL2 = 0,
+    DRP_WRAPPER_APCDEL1,
+    DRP_WRAPPER_APCDEL2
+};
+
+extern T_RF_BAND rf_band[];
+#endif //__L1_RF_H