--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/g23m-aci/aci/cmh_mmq.c	Sun Oct 12 01:45:14 2014 +0000
@@ -0,0 +1,1165 @@
+/* 
++----------------------------------------------------------------------------- 
+|  Project :  GSM-PS (6147)
+|  Modul   :  CMH_MMQ
++----------------------------------------------------------------------------- 
+|  Copyright 2002 Texas Instruments Berlin, AG 
+|                 All rights reserved. 
+| 
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Berlin, AG 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Berlin, AG. 
++----------------------------------------------------------------------------- 
+|  Purpose :  This module provides the query functions related to the
+|             protocol stack adapter for mobility management.
++----------------------------------------------------------------------------- 
+   Aug 02, 2006 REF:OMAPS00083404 Prabakar R (a0393213)
+   Description: Removal of clone code: entity GDI
+   Solution: Two similar functions(rtc_get_time_date() and rtc_get_alarm()) are made into one function rtc_get_time_date().
+   As a result, interface for rtc_get_time_date() has been changed. Change has been done here to be 
+   consistent with the new interface.	
+*/ 
+
+#ifndef CMH_MMQ_C
+#define CMH_MMQ_C
+#endif
+
+#include "aci_all.h"
+
+/*==== INCLUDES ===================================================*/
+#include "aci_cmh.h"
+#include "ati_cmd.h"
+#include "aci_cmd.h"
+#include "aci.h"
+
+#ifdef FAX_AND_DATA
+#include "aci_fd.h"
+#endif    /* of #ifdef FAX_AND_DATA */
+
+#include "pcm.h"
+#include "psa.h"
+#include "psa_mm.h"
+#include "psa_util.h"
+#include "cmh.h"
+#include "cmh_mm.h"
+#include "rx.h"
+#ifdef TI_PS_OP_OPN_TAB_ROMBASED
+#include "plmn_decoder.h"
+#include "rom_tables.h"
+#endif
+
+#include "rtc.h"
+
+#ifdef FF_TIMEZONE
+#include "rv/rv_general.h"
+#include "rtc/rtc_tz.h"
+#endif
+
+#ifdef GPRS
+#include "gaci_cmh.h"
+#include "psa_gmm.h"
+#endif
+
+#ifndef _SIMULATION_
+/******************************/
+/* just to get FFS !!!!       */
+/* TEMPORARY until use of NVM */
+#ifndef GPRS
+#define DONT_LET_FFSH2_DEF_GPRS
+#endif
+
+#include "ffs/ffs.h"
+
+
+/* check whether latter has defined GPRS !!! */
+#ifdef DONT_LET_FFSH2_DEF_GPRS
+#undef GPRS
+#endif
+
+#undef DONT_LET_FFSH2_DEF_GPRS
+/***************************/
+#endif /* _SIMULATION_ */
+
+
+/*==== CONSTANTS ==================================================*/
+
+/*==== EXPORT =====================================================*/
+
+/*==== VARIABLES ==================================================*/
+#if defined (GPRS) && defined (DTI)
+EXTERN T_GMM_SHRD_PRM gmmShrdPrm;
+#endif
+EXTERN T_ONS_READ_STATE ONSReadStatus;
+/*==== FUNCTIONS ==================================================*/
+
+EXTERN BOOL cmhSIM_plmn_is_hplmn();
+
+LOCAL T_ACI_RETURN qat_plus_percent_COPS( T_ACI_CMD_SRC srcId,
+                                          T_ACI_COPS_MOD * mode,
+                                          T_ACI_COPS_FRMT * format,
+                                          CHAR * oper,
+                                          T_ACI_COPS_SVST * svrStatus);
+#ifdef TI_PS_FF_AT_P_CMD_CTREG
+EXTERN BOOL cl_shrd_get_treg_val(T_ACI_TREG *treg);
+#endif /* TI_PS_FF_AT_P_CMD_CTREG */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentBAND             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %BAND? AT command
+            which returns the current multiband configuration.
+
+            <bandMode>: band switch mode.
+            <bandType>: band selection.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentBAND(T_ACI_CMD_SRC   srcId,
+                                    T_ACI_BAND_MODE *bandMode,
+                                    UBYTE           *bandType)
+{
+  UBYTE dummy;
+
+  TRACE_FUNCTION ("qAT_PercentBAND()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  if( bandMode EQ NULL OR
+      bandType EQ NULL )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  if(!cmhMM_getBandSettings( bandType, &dummy ))
+  {
+    *bandMode = BAND_MODE_Auto;
+  }
+  else
+  {
+    *bandMode = BAND_MODE_Manual;
+  }
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCOPS             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +COPS? AT command
+            which returns the current setting of mode, format and
+            operator.
+
+            <mode>:   registration mode.
+            <format>: format of operator
+            <oper>:   operator string
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCOPS ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_COPS_MOD * mode,
+                                   T_ACI_COPS_FRMT * format,
+                                   CHAR * oper )
+{
+  /* Implements Measure 127 */
+  return (qat_plus_percent_COPS (srcId, mode, format, oper, NULL ) );
+
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentCOPS             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +COPS? AT command
+            which returns the current setting of mode, format and
+            operator.
+
+            <mode>:   registration mode.
+            <format>: format of operator
+            <oper>:   operator string
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCOPS ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_COPS_MOD * mode,
+                                   T_ACI_COPS_FRMT * format,
+                                   T_ACI_COPS_SVST * svrStatus,
+                                   CHAR * oper )
+{
+  /* Implements Measure 127 */
+  return (qat_plus_percent_COPS (srcId, mode, format, oper, svrStatus ) );
+}
+
+
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCREG             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CREG? AT command
+            which returns the current setting of registration status.
+
+            <stat>:   registration status.
+            <lac>:    current lac.
+            <cid>:    current cell id.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCREG ( T_ACI_CMD_SRC    srcId,
+                                   T_ACI_CREG_STAT *stat,
+                                   USHORT          *lac,
+                                   USHORT          *cid )
+{
+
+  TRACE_FUNCTION ("qAT_PlusCREG()");
+
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  *stat = mmShrdPrm.creg_status;
+  *lac  = mmShrdPrm.lac;
+  *cid  = mmShrdPrm.cid;
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentCREG          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CREG? AT command
+            which returns the current setting of registration status.
+
+            <stat>:     registration status.
+            <lac>:      current lac.
+            <cid>:      current cell id.
+            <gprs_ind>: if GPRS is available or not
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCREG ( T_ACI_CMD_SRC srcId, 
+                                      T_ACI_CREG_STAT *stat, 
+                                      USHORT *lac, 
+                                      USHORT *cid, 
+                                      T_ACI_P_CREG_GPRS_IND *gprs_ind,
+                                      U8*           rt)
+{
+
+  TRACE_FUNCTION ("qAT_PercentCREG()");
+
+  qAT_PlusCREG (srcId, stat, lac, cid);
+
+#if defined (GPRS) AND defined (DTI)
+  *gprs_ind = gmmShrdPrm.gprs_indicator;
+  *rt       = gmmShrdPrm.rt;
+#else
+  *gprs_ind = P_CREG_GPRS_Not_Supported; /* ACI-SPR-17218: use ACI type */
+  *rt       = 0;
+#endif /* GPRS */
+
+  return( AT_CMPL );
+}
+
+#ifdef TI_PS_FF_AT_CMD_WS46
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusWS46             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +WS46? AT
+            command which returns the current setting wireless network
+            selection.
+
+            <mode>:   network mode.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusWS46 (T_ACI_CMD_SRC  srcId,
+                                  T_ACI_WS46_MOD * mode )
+{
+
+  TRACE_FUNCTION ("qAT_PlusWS46()");
+
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  *mode = WS46_MOD_Gsm;
+
+  return( AT_CMPL );
+}
+#endif /* TI_PS_FF_AT_CMD_WS46 */
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCOPN             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +COPN AT
+            command which returns the current operator names stored in
+            ME.
+
+            <lstId>:      list identifier.
+            <startIdx>:   start index to read from.
+            <lastIdx>:    buffer for index of last copied name.
+            <oprLstBuf>:  buffer for operator names. length of MAX_OPER.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCOPN  ( T_ACI_CMD_SRC    srcId,
+                                    T_ACI_COPN_LID   lstId,
+                                    SHORT            startIdx,
+                                    SHORT           *lastIdx,
+                                    T_ACI_COPN_OPDESC *oprLstBuf)
+{
+  USHORT  idx;                        /* holds list idx */
+  EF_PLMN plmnBuf;                    /* buffer PCM entry */
+  USHORT  maxRec;                     /* holds maximum records */
+  USHORT  recNr;                      /* holds record number */
+  USHORT  oprLstLen;                  /* holds fixed oper list length */
+  UBYTE   retVal;                     /* holds return value */
+  UBYTE   ver;                        /* holds version */
+  UBYTE   len;                        /* holds operator name length */
+
+#ifdef TI_PS_OP_OPN_TAB_ROMBASED
+/* Changes for ROM data */ 
+  const UBYTE *plmn_comp_entry; /* get a local pointer holder */
+  T_OPER_ENTRY oper;
+  int  i;
+#endif
+
+  TRACE_FUNCTION ("qAT_PlusCOPN()"); 
+
+/*
+ *-------------------------------------------------------------------
+ * determine list identifier
+ *-------------------------------------------------------------------
+ */
+  switch( lstId )
+  {
+  /*
+   *-----------------------------------------------------------------
+   * for the list in permanent configuration memory
+   *-----------------------------------------------------------------
+   */
+    case( COPN_LID_Pcm ):
+
+      recNr = startIdx+1;
+      idx   = 0;
+
+      do
+      {
+        /* Implements Measure#32: Row 981  */
+        retVal= pcm_ReadRecord( (UBYTE *) ef_plmn_id, recNr, SIZE_EF_PLMN,
+                                (UBYTE *) &plmnBuf, &ver, &maxRec );
+
+        if( retVal EQ PCM_INVALID_SIZE OR retVal EQ PCM_INVALID_RECORD )
+        {
+          if( idx EQ 0 )
+          {
+            ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_InvIdx );
+            return( AT_FAIL );
+          }
+          break;
+        }
+
+        if( plmnBuf.mcc[0] NEQ 0xFF AND plmnBuf.mnc[0] NEQ 0xFF AND
+            plmnBuf.lngNam[0] NEQ 0xFF )
+        {
+          /* Implements Measure#32: Row 980 */
+          sprintf(oprLstBuf[idx].numOper, format_03x02x_str,
+                  ((plmnBuf.mcc[0]<<8) + plmnBuf.mcc[1]),
+                  ((plmnBuf.mnc[0]<<8) + plmnBuf.mnc[1]));
+
+          for( len = 0;
+               len < SIZE_EF_PLMN_LONG AND plmnBuf.lngNam[len] NEQ 0xFF;
+               len++ )
+            ;
+
+          utl_cvtGsmIra( plmnBuf.lngNam, len,
+                         (UBYTE*)oprLstBuf[idx].alphaOper,
+                         MAX_ALPHA_OPER_LEN,
+                         CSCS_DIR_GsmToIra );
+
+          oprLstBuf[idx].alphaOper[MINIMUM(len,MAX_ALPHA_OPER_LEN-1)] = 0x0;
+          idx++;
+        }
+
+        recNr++;
+      }
+      while( idx < MAX_OPER );
+
+      break;
+  /*
+   *-----------------------------------------------------------------
+   * for the list in constant memory
+   *-----------------------------------------------------------------
+   */
+    case( COPN_LID_Cnst ):
+
+      oprLstLen = cmhMM_GetOperLstLen();
+
+      if( startIdx >= oprLstLen )
+      {
+        ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_InvIdx );
+        return( AT_FAIL );
+      }
+#ifdef TI_PS_OP_OPN_TAB_ROMBASED
+   /* Changes for ROM data */ 
+
+    plmn_comp_entry = ptr_plmn_compressed;
+
+    /* skip the first (start-1) number of plmn entries. */
+    i=0;
+    while (i < startIdx) {
+        plmn_comp_entry += cmhMM_PlmnEntryLength (plmn_comp_entry);
+        i+=1;
+    }
+
+      for( idx = 0, recNr = startIdx;
+           idx < MAX_OPER AND recNr < oprLstLen AND 
+           !(cmhMM_decodePlmn (&oper, plmn_comp_entry));
+           idx++, recNr++ )
+      {
+        /* Implements Measure#32: Row 980 */
+        cmhMM_mcc_mnc_print(&(oprLstBuf[idx].numOper[0]),
+                            oper.mcc,
+                            oper.mnc);
+
+        strncpy( oprLstBuf[idx].alphaOper, oper.longName,
+                 MAX_ALPHA_OPER_LEN-1 );
+
+        oprLstBuf[idx].alphaOper[MAX_ALPHA_OPER_LEN-1] = 0x0;
+
+        /* Next compressed PLMN entry */
+        plmn_comp_entry += cmhMM_PlmnEntryLength (plmn_comp_entry);        
+      }
+#else
+      for( idx = 0, recNr = startIdx;
+           idx < MAX_OPER AND recNr < oprLstLen;
+           idx++, recNr++ )
+      {
+        /* Implements Measure#32: Row 980 */
+        cmhMM_mcc_mnc_print(&(oprLstBuf[idx].numOper[0]),
+                            operListFixed[recNr].mcc,
+                            operListFixed[recNr].mnc);
+
+        strncpy( oprLstBuf[idx].alphaOper, operListFixed[recNr].longName,
+                 MAX_ALPHA_OPER_LEN-1 );
+
+        oprLstBuf[idx].alphaOper[MAX_ALPHA_OPER_LEN-1] = 0x0;
+      }
+#endif
+      break;
+  /*
+   *-----------------------------------------------------------------
+   * unexpected list type
+   *-----------------------------------------------------------------
+   */
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * terminate list and set last index
+ *-------------------------------------------------------------------
+ */
+  if( idx < MAX_OPER )
+  {
+    oprLstBuf[idx].numOper[0]   = 0x0;
+    oprLstBuf[idx].alphaOper[0] = 0x0;
+  }
+
+
+  *lastIdx = ( recNr NEQ 0 )?recNr-1:0;
+
+  return( AT_CMPL );
+}
+
+/*
++-------------------------------------------------------------------+
+|  NEW AT Command qAT_PercentCOPN                                   |
+|                                                                   |
++-------------------------------------------------------------------+
+*/
+ /*The same function in EDGE should be remved from ACIA when EDGE is 
+     merged to the UMTS*/ 
+
+GLOBAL T_ACI_RETURN qAT_PercentCOPN( T_ACI_CMD_SRC  srcId,
+                                     T_ACI_COPS_FRMT format,
+                                     CHAR *opr,
+                                     T_ACI_OPER_NTRY *oper_ntry)
+{
+  T_OPER_ENTRY plmnDesc;
+  BOOL         found;
+
+  if(format EQ COPS_FRMT_Numeric)
+  {
+    found = cmhMM_FindNumeric(&plmnDesc, opr);
+  }
+  else
+  {
+    found = cmhMM_FindName(&plmnDesc, opr,(T_ACI_CPOL_FRMT)format);
+  }
+  if (found)
+  {
+    oper_ntry->mcc = plmnDesc.mcc;
+    oper_ntry->mnc = plmnDesc.mnc;
+    strncpy (oper_ntry->longName, plmnDesc.longName, sizeof(oper_ntry->longName));
+    oper_ntry->longName[sizeof(oper_ntry->longName) - 1] = '\0';
+    strncpy ((CHAR *)oper_ntry->shrtName, plmnDesc.shrtName, sizeof(oper_ntry->shrtName));
+    oper_ntry->shrtName[sizeof(oper_ntry->shrtName) - 1] = '\0';
+    oper_ntry->long_len = plmnDesc.long_len;
+    oper_ntry->shrt_len = plmnDesc.shrt_len;
+    switch (plmnDesc.pnn)
+    {
+      case Read_EONS:
+        oper_ntry->source = Read_EONS;
+        break;
+      case Read_CPHS:
+        oper_ntry->source = Read_CPHS;
+        break;
+      default:
+        oper_ntry->source = Read_ROM_TABLE;
+        break;
+    }
+  }
+  else
+  {
+    oper_ntry->longName[0] = '\0';
+    oper_ntry->shrtName[0] = '\0';
+    oper_ntry->mcc = 0;
+    oper_ntry->mnc = 0;
+    oper_ntry->source = Read_INVALID;
+  }	
+  return AT_CMPL;
+}
+
+
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentNRG           |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %NRG? AT command
+            which returns the current setting of registration mode and
+            service mode and the current status of service.
+
+            <regMode>:   registration mode.
+            <srvMode>:   service mode.
+            <oprFrmt>:   operator format.
+            <srvStat>:   service status.
+            <oper>   :   operator
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentNRG( T_ACI_CMD_SRC srcId,
+                                    T_ACI_NRG_RGMD *regMode,
+                                    T_ACI_NRG_SVMD *srvMode,
+                                    T_ACI_NRG_FRMT *oprFrmt,
+                                    T_ACI_NRG_SVMD *srvStat,
+                                    CHAR           *oper)
+{
+
+  T_ACI_COPS_FRMT copsFormat;
+  
+
+  TRACE_FUNCTION ("qAT_PercentNRG()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  switch( mmShrdPrm.regStat )
+  {
+    case( NO_VLD_RS   ):
+    case( RS_NO_SRV   ):  *srvStat = NRG_SVMD_NoSrv;      break;
+    case( RS_LMTD_SRV ):  *srvStat = NRG_SVMD_Limited;    break;
+    case( RS_FULL_SRV ):  *srvStat = NRG_SVMD_Full;       break;
+    default:              *srvStat = NRG_SVMD_NotPresent; break;
+  }
+
+  *srvMode = cmhPrm[srcId].mmCmdPrm.NRGsrvMode;
+  *oprFrmt = cmhPrm[srcId].mmCmdPrm.NRGoprFrmt;
+  *oper    = 0x0;
+
+  *regMode = cmhPrm[srcId].mmCmdPrm.NRGregMode;
+
+   switch( *oprFrmt )
+  {
+    case(  NRG_FRMT_NotPresent  ): 
+    copsFormat = COPS_FRMT_NotPresent; 
+    break;
+    case( NRG_FRMT_Numeric   ): 
+    copsFormat = COPS_FRMT_Numeric  ; 
+    break;
+    case( NRG_FRMT_Short):
+    copsFormat = COPS_FRMT_Short ; 
+    break;
+    case( NRG_FRMT_Long):
+    copsFormat = COPS_FRMT_Long; 
+    break;
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+
+  cmhMM_OperatorQuery(srcId,copsFormat,oper);
+
+  
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI	         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PercentCSQ             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the function for Signal Quality query  			
+
+  Shen,Chao
+  Juni.13th, 2003
+*/
+#ifdef FF_PS_RSSI
+GLOBAL T_ACI_RETURN qAT_PercentCSQ( T_ACI_CMD_SRC  srcId,
+                                    UBYTE *rssi,
+                                    UBYTE *ber,
+                                    UBYTE *actlevel,
+                                    UBYTE *min_access_level)
+#else
+GLOBAL T_ACI_RETURN qAT_PercentCSQ( T_ACI_CMD_SRC  srcId,
+                                    UBYTE *rssi,
+                                    UBYTE *ber,
+                                    UBYTE *actlevel)
+#endif
+{
+  rx_Status_Type    rxStat;  
+
+  TRACE_FUNCTION("qAT_PercentCSQ()");
+
+  if ( rx_GetStatus ( &rxStat ) NEQ DRV_OK )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return AT_FAIL;
+  }
+  else
+  {
+    if ( rxStat.gsmLevel EQ 0xFF OR rxStat.gsmLevel EQ 0 )
+    {
+      *rssi = ACI_RSSI_FAULT;
+    }
+    else if ( rxStat.gsmLevel > 59 )
+    {
+      *rssi = 31;
+    }
+    else
+    {
+      *rssi = ( rxStat.gsmLevel / 2 ) + 2;
+    }
+
+    if ( rxStat.rxQuality EQ RX_QUAL_UNAVAILABLE )
+    {
+      *ber = ACI_BER_FAULT;
+    }
+    else
+    {
+      *ber = rxStat.rxQuality;
+    }
+
+    *actlevel = rxStat.actLevel;
+
+
+#ifdef FF_PS_RSSI
+    if ( rxStat.min_access_level EQ RX_ACCE_UNAVAILABLE )
+    {
+      *min_access_level = ACI_MIN_RXLEV_FAULT;
+    }
+    else
+    {
+      *min_access_level = rxStat.min_access_level;
+    }
+#endif
+
+    return AT_CMPL;
+  }
+}
+
+#ifdef TI_PS_FF_AT_P_CMD_DBGINFO
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI	              MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PercentDBGINFO       |
++--------------------------------------------------------------------+
+
+  PURPOSE : query free mem pool blocks.		
+*/
+GLOBAL T_ACI_RETURN qAT_PercentDBGINFO(T_ACI_CMD_SRC srcId, 
+                                       ULONG param,
+                                       USHORT stor,
+                                       USHORT *free,
+                                       USHORT *alloc)
+{
+  int ret=0;
+
+  TRACE_FUNCTION ("qAT_PercentDBGINFO()");
+  /*
+   *-----------------------------------------------------------------
+   * check command source
+   *-----------------------------------------------------------------
+   */  
+  if( ! cmh_IsVldCmdSrc (srcId) ) 
+  { 
+    return (AT_FAIL);
+  }
+
+  ret = vsi_m_status (hCommACI,
+                       param,
+                       stor,
+                       free,
+                       alloc );
+  if (ret EQ VSI_ERROR OR *free EQ 0)
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_MemFull );
+    return (AT_FAIL);
+  }
+
+  return (AT_CMPL);
+}
+#endif /* TI_PS_FF_AT_P_CMD_DBGINFO */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PlusCTZR             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CTZR AT command
+            which will query the status of CTZRmode, indicating whether time
+            zone change rep[orting is enabled or disabled.
+
+            <on/off>:   Indicates whether time zone reporting is enabled or disabled.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCTZR ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CTZR_MODE *mode)
+{
+  TRACE_FUNCTION ("qAT_PlusCTZR()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("qAT_PlusCTZR(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+  *mode = cmhPrm[srcId].mmCmdPrm.CTZRMode;
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PlusCTZU             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CTZU AT command
+            which will query the status of CTZUmode, indicating whether time
+            zone automatic update is enabled or disabled.
+
+            <on/off>:   Indicates whether time zone automatic update is enabled or disabled.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCTZU ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CTZU_MODE *mode)
+{
+  TRACE_FUNCTION ("qAT_PlusCTZU()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("qAT_PlusCTZU(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+  *mode = cmhPrm[srcId].mmCmdPrm.CTZUMode;
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT :                       MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PlusCCLK          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the sAT_PlusCCLK command
+            which will query the status of the RTC in the MT, indicating what the time
+            is in the MT.
+*/
+GLOBAL T_ACI_RETURN qAT_PlusCCLK ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_RTC_DATE *date_s,
+                                   T_ACI_RTC_TIME *time_s,
+                                   int * timeZone
+                                 )
+{
+#ifndef _SIMULATION_
+  UBYTE  ret;
+#endif /* _SIMULATION_ */
+
+  TRACE_FUNCTION ("qAT_PlusCCLK()");
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("qAT_PlusCCLK(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+  TRACE_EVENT("qAT_PlusCCLK(): get time and date " );
+#ifndef _SIMULATION_
+  /*
+  Aug 02, 2006 REF:OMAPS00083404 Prabakar R (a0393213)
+       Description: Removal of clone code: entity GDI
+       Solution: Two similar functions(rtc_get_time_date() and rtc_get_alarm()) are made into one function rtc_get_time_date().
+       As a result, interface for rtc_get_time_date() has been changed. Change has been done here to be 
+       consistent with the new interface.
+  */
+  ret = rtc_get_time_date((T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s, RTC_TIME_TYPE_CURRENT);
+  switch (ret)
+  {
+    case 0:                     /* RVF_OK */
+#ifdef FF_TIMEZONE
+      *timeZone = RTC_GetCurrentTZ(); /* Get current timezone now time and date are obtained.*/
+      TRACE_EVENT_P1("qAT_PlusCCLK(): timezone obatained: %d", *timeZone);
+#endif /* FF_TIMEZONE */
+      return( AT_CMPL );
+    default:
+      TRACE_EVENT_P1("qAT_PlusCCLK(): ERROR: %d", ret);  /* RVF_NOT_READY or RVF_INTERNAL ERROR */
+      return( AT_FAIL );
+  }
+#else  /* _SIMULATION_ */
+/* Set return info for date time to: "04/08/17,13:31:04-10" */
+  date_s->year    = 2004;
+  date_s->month   = 8;
+  date_s->day     = 17;
+
+  time_s->hour    = 13;
+  time_s->minute  = 31;
+  time_s->second  = 4;
+
+  time_s->format  = 0;  /* RTC_TIME_FORMAT_24HOUR = 0 */
+  time_s->PM_flag = 0;
+  *timeZone = -10;  /* Set timezone to -10 */
+  return( AT_CMPL );
+#endif /* _SIMULATION_ */
+
+}
+
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PercentCTZV             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %CTZV AT command
+            which will query the status of PCTZVmode, indicating whether time
+            and date report is enabled or disabled.
+
+            <on/off>:   Indicates whether time and date report is enabled or disabled.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCTZV ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_PCTZV_MODE *mode)
+{
+  TRACE_FUNCTION ("qAT_PercentCTZV()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("qAT_PercentCTZV(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+  *mode = cmhPrm[srcId].mmCmdPrm.PCTZVMode;
+
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PercentCNIV             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %CNIV AT command
+            which will query the status of CNIVmode, indicating whether time
+            and date report is enabled or disabled.
+
+            <on/off>:   Indicates whether time and date report is enabled or disabled.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCNIV ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CNIV_MODE *mode)
+{
+  TRACE_FUNCTION ("qAT_PercentCNIV()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("qAT_PercentCNIV(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+  *mode = cmhPrm[srcId].mmCmdPrm.CNIVMode;
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI               MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PlusCIND             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the function for Signal Quality query
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCIND ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CIND_SIGNAL_TYPE  *sCindSgnalSettings,
+                                   T_ACI_CIND_SMSFULL_TYPE *sCindSmsFullSettings )
+{
+  T_ACI_MM_CIND_VAL_TYPE  *pMMCmdPrm;
+
+  TRACE_FUNCTION ("qAT_PlusCIND()");
+
+  if( !cmh_IsVldCmdSrc( srcId ) OR (sCindSgnalSettings EQ NULL) OR (sCindSmsFullSettings EQ NULL) )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pMMCmdPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
+
+  *sCindSgnalSettings   = pMMCmdPrm->sCindSignalParam;
+  *sCindSmsFullSettings = pMMCmdPrm->sCindSmsFullParam;
+
+  return(AT_CMPL);
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI               MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PlusCMER             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the function for Signal Quality query
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCMER ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CMER_MODE_TYPE *sCmerModeSettings,
+                                   T_ACI_CMER_IND_TYPE  *sCmerIndicationSettings,
+                                   T_ACI_CMER_BFR_TYPE  *sCmerBfrSettings )
+
+{
+  T_ACI_MM_CMER_VAL_TYPE  *pMMCmdPrm;
+
+  TRACE_FUNCTION ("qAT_PlusCMER()");
+
+  if( !cmh_IsVldCmdSrc( srcId ) OR (sCmerModeSettings EQ NULL) OR
+      (sCmerIndicationSettings EQ NULL) OR (sCmerBfrSettings EQ NULL))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pMMCmdPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
+
+  *sCmerModeSettings       = pMMCmdPrm->sCmerModeParam;
+  *sCmerIndicationSettings = pMMCmdPrm->sCmerIndParam;
+  *sCmerBfrSettings        = pMMCmdPrm->sCmerBfrParam;
+
+  return(AT_CMPL);
+}
+
+/* Implements Measure 127 */
+/*
++------------------------------------------------------------------------------
+|  Function    : qat_plus_percent_COPS 
++------------------------------------------------------------------------------
+|  Purpose     : This is the functional counterpart to Both +COPS? and %COPS 
+|                AT command which returns the current setting of mode, 
+|                format and operator.
+|
+|  Parameters  : srcId      - AT command source identifier
+|                mode       - +COPS parameter <mode> 
+|                format     - +COPS parameter <format>
+|                oper       - Operator
+|                svrStatus  - %COPS parameter <srvStatus>
+|                at_cmd_id  - AT Command Identifier
+|
+|  Return      : ACI functional return codes
++------------------------------------------------------------------------------
+*/
+
+LOCAL T_ACI_RETURN qat_plus_percent_COPS( T_ACI_CMD_SRC srcId, T_ACI_COPS_MOD * mode,
+                                          T_ACI_COPS_FRMT * format, CHAR * oper,
+                                          T_ACI_COPS_SVST * svrStatus)
+{
+
+  T_MM_CMD_PRM * pMMCmdPrm;   /* points to MM command parameters */
+
+  TRACE_FUNCTION ("qat_plus_percent_COPS()");
+
+  /* check command source */  
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
+
+  /* fill in parameters */  
+  switch(mmShrdPrm.COPSmode)
+  {
+    case(COPS_MOD_Auto):
+    case(COPS_MOD_Man):
+    case(COPS_MOD_Dereg):
+      *mode = mmShrdPrm.COPSmode;
+      break;
+
+    /*
+     * case(COPS_MOD_SetOnly):
+     * mmShrdPrm.COPSmode can't have been set with this value
+     */
+
+    case(COPS_MOD_Both):
+      if(mmShrdPrm.regModeAutoBack)
+      {
+        *mode = COPS_MOD_Man;
+      }
+      else
+      {
+        *mode = COPS_MOD_Auto;
+      }
+      break;
+
+    default:
+      *mode = (T_ACI_COPS_MOD)mmShrdPrm.regMode;
+      break;
+  }
+
+  *format = pMMCmdPrm -> COPSfrmt;
+
+  if ( svrStatus )
+  {
+    switch( mmShrdPrm.regStat )
+    {
+      case( NO_VLD_RS   ):
+      case( RS_NO_SRV   ):  *svrStatus = COPS_SVST_NoSrv;      break;
+      case( RS_LMTD_SRV ):  *svrStatus =COPS_SVST_Limited;     break;
+      case( RS_FULL_SRV ):  *svrStatus = COPS_SVST_Full;       break;
+      default:              *svrStatus = COPS_SVST_NotPresent; break;
+    }
+  }
+
+  *oper   = 0x0;
+  cmhMM_OperatorQuery(srcId,pMMCmdPrm -> COPSfrmt,oper);
+  TRACE_EVENT(oper);
+  return( AT_CMPL );
+}
+#ifdef TI_PS_FF_AT_P_CMD_CTREG
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI               MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : qAT_PlusCTREG            |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the function for Signal Quality query
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCTREG ( T_ACI_CMD_SRC srcId, T_ACI_TREG *treg )
+{
+  BOOL ret = FALSE;
+
+  TRACE_FUNCTION ("qAT_PlusCTREG()");
+
+  if( !cmh_IsVldCmdSrc( srcId ))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  ret = cl_shrd_get_treg_val(treg);
+
+  if(ret EQ TRUE)
+  {
+    return (AT_CMPL);
+  }
+
+  return (AT_FAIL);
+}
+#endif /* TI_PS_FF_AT_P_CMD_CTREG */
+
+/*==== EOF ========================================================*/