diff gsm-fw/g23m-aci/uart/uart_kerp.c @ 775:eedbf248bac0

gsm-fw/g23m-aci subtree: initial import from LoCosto source
author Michael Spacefalcon <msokolov@ivan.Harhan.ORG>
date Sun, 12 Oct 2014 01:45:14 +0000
parents
children f54080301c98
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gsm-fw/g23m-aci/uart/uart_kerp.c	Sun Oct 12 01:45:14 2014 +0000
@@ -0,0 +1,1986 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :
+|  Modul   :
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  This modul is part of the entity UART and implements all
+|             functions to handles the incoming primitives as described in
+|             the SDL-documentation (KER-statemachine)
++-----------------------------------------------------------------------------
+*/
+
+#ifndef UART_KERP_C
+#define UART_KERP_C
+#endif /* !UART_KERP_C */
+
+#define ENTITY_UART
+
+/*==== INCLUDES =============================================================*/
+
+#ifdef WIN32
+#include "nucleus.h"
+#endif /* WIN32 */
+#include "typedefs.h"   /* to get Condat data types */
+#include "vsi.h"        /* to get a lot of macros */
+#include "macdef.h"     /* to get a lot of macros */
+#include "custom.h"
+#include "gsm.h"        /* to get a lot of macros */
+#include "cnf_uart.h"   /* to get cnf-definitions */
+#include "mon_uart.h"   /* to get mon-definitions */
+#include "prim.h"       /* to get the definitions of used SAP and directions */
+#ifdef DTILIB
+#include "dti.h"        /* to get dti lib */
+#endif /* DTILIB */
+#include "pei.h"        /* to get PEI interface */
+#ifdef FF_MULTI_PORT
+#include "gsi.h"        /* to get definitions of serial driver */
+#else /* FF_MULTI_PORT */
+#ifdef _TARGET_
+#include "uart/serialswitch.h"
+#include "uart/traceswitch.h"
+#else /* _TARGET_ */
+#include "serial_dat.h" /* to get definitions of serial driver */
+#endif /* _TARGET_ */
+#endif /* FF_MULTI_PORT */
+#include "uart.h"       /* to get the global entity definitions */
+
+#include "uart_kerf.h"  /* to get ker functions */
+#include "uart_kers.h"  /* to get ker signals */
+#include "uart_drxs.h"  /* to get drx signals */
+#include "uart_dtxs.h"  /* to get dtx signals */
+#include "uart_rts.h"   /* to get  rt signals */
+#ifdef FF_MULTI_PORT
+#include "uart_prxs.h"  /* to get  rx signals */
+#include "uart_ptxs.h"  /* to get  tx signals */
+#else /* FF_MULTI_PORT */
+#include "uart_rxs.h"   /* to get  rx signals */
+#include "uart_txs.h"   /* to get  tx signals */
+#endif /* FF_MULTI_PORT */
+
+/*==== CONST ================================================================*/
+
+/*==== LOCAL VARS ===========================================================*/
+
+/*==== PRIVATE FUNCTIONS ====================================================*/
+
+/*==== PUBLIC FUNCTIONS =====================================================*/
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_parameters_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_PARAMETERS_REQ
+|
+| Parameters  : *uart_parameters_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_parameters_req (
+              T_UART_PARAMETERS_REQ *uart_parameters_req)
+{
+  UBYTE   i;
+  T_DLC*  dlc;
+
+  TRACE_FUNCTION( "ker_uart_parameters_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_parameters_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_parameters_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_parameters_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_parameters_req=%08x is not allocated",
+                    uart_parameters_req);
+  }
+  else if(uart_parameters_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_parameters_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_parameters_req->device];
+
+#ifdef FF_MULTI_PORT
+  /*
+   * set new baud rate
+   */
+  switch (uart_parameters_req->comPar.speed)
+  {
+    case UART_IO_SPEED_AUTO:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_AUTO;
+      break;
+    case UART_IO_SPEED_75:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_75;
+      break;
+    case UART_IO_SPEED_150:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_150;
+      break;
+    case UART_IO_SPEED_300:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_300;
+      break;
+    case UART_IO_SPEED_600:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_600;
+      break;
+    case UART_IO_SPEED_1200:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_1200;
+      break;
+    case UART_IO_SPEED_2400:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_2400;
+      break;
+    case UART_IO_SPEED_4800:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_4800;
+      break;
+    case UART_IO_SPEED_7200:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_7200;
+      break;
+    case UART_IO_SPEED_9600:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_9600;
+      break;
+    case UART_IO_SPEED_14400:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_14400;
+      break;
+    case UART_IO_SPEED_19200:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_19200;
+      break;
+    case UART_IO_SPEED_28800:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_28800;
+      break;
+    case UART_IO_SPEED_33900:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_33900;
+      break;
+    case UART_IO_SPEED_38400:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_38400;
+      break;
+    case UART_IO_SPEED_57600:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_57600;
+      break;
+    case UART_IO_SPEED_115200:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_115200;
+      break;
+    case UART_IO_SPEED_203125:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_203125;
+      break;
+    case UART_IO_SPEED_406250:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_406250;
+      break;
+    case UART_IO_SPEED_812500:
+      uart_data->ker.act_dcb.Baud = GSI_BAUD_812500;
+      break;
+    case UART_IO_SPEED_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: baudrate unexpected" );
+      break;
+  }
+
+  /*
+   * set new bits per character
+   */
+  switch (uart_parameters_req->comPar.bpc)
+  {
+    case UART_IO_BPC_7:
+      uart_data->ker.act_dcb.DataBits = GSI_CHAR7;
+      break;
+    case UART_IO_BPC_8:
+      uart_data->ker.act_dcb.DataBits = GSI_CHAR8;
+      break;
+    case UART_IO_BPC_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: bpc unexpected" );
+      break;
+  }
+
+  /*
+   * set new stop bit
+   */
+  switch (uart_parameters_req->comPar.nsb)
+  {
+    case UART_IO_SB_1:
+      uart_data->ker.act_dcb.StopBits = GSI_STOP1;
+      break;
+    case UART_IO_SB_2:
+      uart_data->ker.act_dcb.StopBits = GSI_STOP2;
+      break;
+    case UART_IO_SB_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: stop bits unexpected" );
+      break;
+  }
+
+  /*
+   * set new parity
+   */
+  switch (uart_parameters_req->comPar.parity)
+  {
+    case UART_IO_PA_NONE:
+      uart_data->ker.act_dcb.Parity = GSI_PARITYNO;
+      break;
+    case UART_IO_PA_EVEN:
+      uart_data->ker.act_dcb.Parity = GSI_PARITYEVEN;
+      break;
+    case UART_IO_PA_ODD:
+      uart_data->ker.act_dcb.Parity = GSI_PARITYODD;
+      break;
+    case UART_IO_PA_SPACE:
+      uart_data->ker.act_dcb.Parity = GSI_PARITYSPACE;
+      break;
+    case UART_IO_PA_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: parity unexpected" );
+      break;
+  }
+
+  /*
+   * set new RX flow control
+   */
+  switch (uart_parameters_req->comPar.flow_rx)
+  {
+    case UART_IO_FC_RX_NONE:
+      uart_data->ker.act_dcb.RxFlowControl = GSI_FLOWNO;
+      break;
+    case UART_IO_FC_RX_RTS:
+      uart_data->ker.act_dcb.RxFlowControl = GSI_FLOWHW;
+      break;
+    case UART_IO_FC_RX_XOFF:
+      uart_data->ker.act_dcb.RxFlowControl = GSI_FLOWSW;
+      break;
+    case UART_IO_FC_RX_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: RX flow control unexpected" );
+      break;
+  }
+
+  /*
+   * set new TX flow control
+   */
+  switch (uart_parameters_req->comPar.flow_tx)
+  {
+    case UART_IO_FC_TX_NONE:
+      uart_data->ker.act_dcb.TxFlowControl = GSI_FLOWNO;
+      break;
+    case UART_IO_FC_TX_RTS:
+      uart_data->ker.act_dcb.TxFlowControl = GSI_FLOWHW;
+      break;
+    case UART_IO_FC_TX_XOFF:
+      uart_data->ker.act_dcb.TxFlowControl = GSI_FLOWSW;
+      break;
+    case UART_IO_FC_TX_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: TX flow control unexpected" );
+      break;
+  }
+
+  /*
+   * set new XON / XOFF values
+   */
+  if(uart_parameters_req->comPar.xon_valid EQ UART_IO_XON_VALID)
+    uart_data->ker.act_dcb.XON = uart_parameters_req->comPar.xon;
+  if(uart_parameters_req->comPar.xoff_valid EQ UART_IO_XOFF_VALID)
+    uart_data->ker.act_dcb.XOFF = uart_parameters_req->comPar.xoff;
+#else /* FF_MULTI_PORT */
+  /*
+   * set new baud rate
+   */
+  switch (uart_parameters_req->comPar.speed)
+  {
+    case UART_IO_SPEED_AUTO:
+      uart_data->ker.act_br = UF_BAUD_AUTO;
+      break;
+    case UART_IO_SPEED_75:
+      uart_data->ker.act_br = UF_BAUD_75;
+      break;
+    case UART_IO_SPEED_150:
+      uart_data->ker.act_br = UF_BAUD_150;
+      break;
+    case UART_IO_SPEED_300:
+      uart_data->ker.act_br = UF_BAUD_300;
+      break;
+    case UART_IO_SPEED_600:
+      uart_data->ker.act_br = UF_BAUD_600;
+      break;
+    case UART_IO_SPEED_1200:
+      uart_data->ker.act_br = UF_BAUD_1200;
+      break;
+    case UART_IO_SPEED_2400:
+      uart_data->ker.act_br = UF_BAUD_2400;
+      break;
+    case UART_IO_SPEED_4800:
+      uart_data->ker.act_br = UF_BAUD_4800;
+      break;
+    case UART_IO_SPEED_7200:
+      uart_data->ker.act_br = UF_BAUD_7200;
+      break;
+    case UART_IO_SPEED_9600:
+      uart_data->ker.act_br = UF_BAUD_9600;
+      break;
+    case UART_IO_SPEED_14400:
+      uart_data->ker.act_br = UF_BAUD_14400;
+      break;
+    case UART_IO_SPEED_19200:
+      uart_data->ker.act_br = UF_BAUD_19200;
+      break;
+    case UART_IO_SPEED_28800:
+      uart_data->ker.act_br = UF_BAUD_28800;
+      break;
+    case UART_IO_SPEED_33900:
+      uart_data->ker.act_br = UF_BAUD_33900;
+      break;
+    case UART_IO_SPEED_38400:
+      uart_data->ker.act_br = UF_BAUD_38400;
+      break;
+    case UART_IO_SPEED_57600:
+      uart_data->ker.act_br = UF_BAUD_57600;
+      break;
+    case UART_IO_SPEED_115200:
+      uart_data->ker.act_br = UF_BAUD_115200;
+      break;
+    case UART_IO_SPEED_203125:
+      uart_data->ker.act_br = UF_BAUD_203125;
+      break;
+    case UART_IO_SPEED_406250:
+      uart_data->ker.act_br = UF_BAUD_406250;
+      break;
+    case UART_IO_SPEED_812500:
+      uart_data->ker.act_br = UF_BAUD_812500;
+      break;
+    case UART_IO_SPEED_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: baudrate unexpected" );
+      break;
+  }
+
+  /*
+   * set new RX flow control
+   */
+  switch (uart_parameters_req->comPar.flow_rx)
+  {
+    case UART_IO_FC_RX_NONE:
+      uart_data->ker.act_fc_rx = fc_none;
+      break;
+    case UART_IO_FC_RX_RTS:
+      uart_data->ker.act_fc_rx = fc_rts;
+      break;
+    case UART_IO_FC_RX_XOFF:
+      uart_data->ker.act_fc_rx = fc_xoff;
+      break;
+    case UART_IO_FC_RX_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: RX flow control unexpected" );
+      break;
+  }
+
+  /*
+   * set new TX flow control
+   */
+  switch (uart_parameters_req->comPar.flow_tx)
+  {
+    case UART_IO_FC_TX_NONE:
+      uart_data->ker.act_fc_tx = fc_none;
+      break;
+    case UART_IO_FC_TX_RTS:
+      uart_data->ker.act_fc_tx = fc_rts;
+      break;
+    case UART_IO_FC_TX_XOFF:
+      uart_data->ker.act_fc_tx = fc_xoff;
+      break;
+    case UART_IO_FC_TX_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: TX flow control unexpected" );
+      break;
+  }
+
+  /*
+   * set new bits per character
+   */
+  switch (uart_parameters_req->comPar.bpc)
+  {
+    case UART_IO_BPC_7:
+      uart_data->ker.act_bpc = bpc_7;
+      break;
+    case UART_IO_BPC_8:
+      uart_data->ker.act_bpc = bpc_8;
+      break;
+    case UART_IO_BPC_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: bpc unexpected" );
+      break;
+  }
+
+  /*
+   * set new stop bit
+   */
+  switch (uart_parameters_req->comPar.nsb)
+  {
+    case UART_IO_SB_1:
+      uart_data->ker.act_sb = sb_1;
+      break;
+    case UART_IO_SB_2:
+      uart_data->ker.act_sb = sb_2;
+      break;
+    case UART_IO_SB_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: stop bits unexpected" );
+      break;
+  }
+
+  /*
+   * set new parity
+   */
+  switch (uart_parameters_req->comPar.parity)
+  {
+    case UART_IO_PA_NONE:
+      uart_data->ker.act_par = pa_none;
+      break;
+    case UART_IO_PA_EVEN:
+      uart_data->ker.act_par = pa_even;
+      break;
+    case UART_IO_PA_ODD:
+      uart_data->ker.act_par = pa_odd;
+      break;
+    case UART_IO_PA_SPACE:
+      uart_data->ker.act_par = pa_space;
+      break;
+    case UART_IO_PA_UNDEF: /* unchanged */
+      break;
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ: parity unexpected" );
+      break;
+  }
+
+  /*
+   * set new XON / XOFF values
+   */
+  if(uart_parameters_req->comPar.xon_valid EQ UART_IO_XON_VALID)
+    uart_data->ker.act_xon = uart_parameters_req->comPar.xon;
+  if(uart_parameters_req->comPar.xoff_valid EQ UART_IO_XOFF_VALID)
+    uart_data->ker.act_xoff = uart_parameters_req->comPar.xoff;
+#endif /* FF_MULTI_PORT */
+
+  /*
+   * set new escape detection values
+   */
+  if(uart_parameters_req->comPar.esc_valid EQ UART_IO_ESC_VALID)
+  {
+#ifdef FF_MULTI_PORT
+    uart_data->ker.act_dcb.EscChar     = uart_parameters_req->comPar.esc_char;
+    uart_data->ker.act_dcb.GuardPeriod = uart_parameters_req->comPar.esc_gp;
+#else /* FF_MULTI_PORT */
+    uart_data->ker.act_ec = uart_parameters_req->comPar.esc_char;
+    uart_data->ker.act_gp = uart_parameters_req->comPar.esc_gp;
+#endif /* FF_MULTI_PORT */
+  }
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_parameters_req);
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_READY:
+      /*
+       * flush all still to send data
+       */
+      uart_data->ker.received_prim|= UART_PARAMETERS_REQ_MASK;
+      uart_data->ker.flush_state   = UART_KER_DRX_FLUSH;
+      dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+      dlc->flushed   = FALSE;
+      uart_data->drx = dlc->drx;
+      sig_ker_drx_flush_req();
+      break;
+
+    case KER_MUX:
+    case KER_MUX_ESTABLISH:
+    case KER_MUX_DLC_CLOSING:
+    case KER_MUX_CLOSING:
+    case KER_MUX_CLOSED:
+      /*
+       * flush all still to send data
+       */
+      uart_data->ker.received_prim|= UART_PARAMETERS_REQ_MASK;
+      uart_data->ker.flush_state   = UART_KER_DRX_FLUSH;
+      /*
+       * mark all to flush DLCs
+       */
+      for(i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++)
+      {
+        dlc = &uart_data->dlc_table[i];
+        if((i EQ UART_CONTROL_INSTANCE) ||
+           (dlc->connection_state EQ UART_CONNECTION_OPEN))
+        {
+          dlc->flushed = FALSE;
+        }
+      }
+      /*
+       * initiate flush in all to flushed DLCs
+       */
+      for(i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++)
+      {
+        dlc = &uart_data->dlc_table[i];
+        if(dlc->flushed NEQ TRUE)
+        {
+          if(i EQ UART_CONTROL_INSTANCE)
+          {
+            if(uart_data->ker.tx_data_desc EQ NULL)
+              sig_any_ker_flushed_ind(UART_CONTROL_INSTANCE);
+          }
+          else
+          {
+            uart_data->drx = dlc->drx;
+            sig_ker_drx_flush_req();
+          }
+        }
+      }
+      break;
+
+    case KER_DEAD:
+      /*
+       * set new UART parameters
+       */
+      ker_setupUart();
+
+#ifdef FF_MULTI_PORT
+      uart_data->ker.act_ec = uart_data->ker.act_dcb.EscChar;
+      uart_data->ker.act_gp = uart_data->ker.act_dcb.GuardPeriod;
+#endif /* FF_MULTI_PORT */
+
+      /*
+       * send confirm primitive
+       */
+      {
+        PALLOC (uart_parameters_cnf, UART_PARAMETERS_CNF);
+        uart_parameters_cnf->device = uart_data->device;
+        PSEND (hCommMMI, uart_parameters_cnf);
+      }
+      break;
+
+    default:
+      TRACE_ERROR( "UART_PARAMETERS_REQ unexpected" );
+      break;
+  }
+} /* ker_uart_parameters_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_dti_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_DTI_REQ
+|
+| Parameters  : *uart_dti_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_dti_req ( T_UART_DTI_REQ *uart_dti_req )
+{
+  T_DLC* dlc;
+  UBYTE  dlc_instance; /* dlc_instance is used as the channel number for dtilib */
+#ifdef DTILIB
+  U8          isOK;
+#else  /* DTILIB */
+  T_HANDLE    hCommUPLINK;
+#endif /* DTILIB */
+
+  TRACE_FUNCTION( "ker_uart_dti_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_dti_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_dti_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_dti_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_dti_req=%08x is not allocated",
+                    uart_dti_req);
+  }
+  else if(uart_dti_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_dti_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_dti_req->device];
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_MUX:
+    case KER_MUX_DLC_CLOSING:
+      dlc_instance = uart_data->dlc_instance[uart_dti_req->dlci];
+      break;
+
+    default:
+      dlc_instance = UART_CONTROL_INSTANCE;
+      break;
+  }
+
+  dlc = &uart_data->dlc_table[dlc_instance];
+  /*
+   * close communication channel
+   * if it is already closed, silently discard primitive
+   */
+  if(dlc->dti_state NEQ DTI_CLOSED)
+  {
+    dti_close(
+      uart_hDTI,
+      uart_data->device,
+      UART_DTI_UP_INTERFACE,
+      dlc_instance,
+      FALSE
+      );
+    dlc->dti_state = DTI_CLOSED;
+
+    /*
+     * no reopen
+     */
+    if (uart_dti_req->dti_conn EQ UART_DISCONNECT_DTI)
+    {
+      PALLOC (uart_dti_cnf, UART_DTI_CNF);
+      uart_data->drx = dlc->drx;
+      uart_data->dtx = dlc->dtx;
+      sig_ker_drx_disconnected_mode_req();
+      sig_ker_dtx_disconnected_mode_req();
+
+      /*
+       * send confirm primitive
+       */
+      uart_dti_cnf->device = uart_data->device;
+      uart_dti_cnf->dlci   = uart_data->dlc_table[dlc_instance].dlci; /* EQ dlci */
+      uart_dti_cnf->dti_conn = UART_DISCONNECT_DTI;
+      PSEND (hCommMMI, uart_dti_cnf);
+
+      return;
+    }
+  }
+
+#ifdef DTILIB
+  if( GET_STATE( UART_SERVICE_KER ) EQ KER_DEAD )
+  {
+    /*
+     * set dlc values - this has to happen before
+     * the call of dti_open, because within that call
+     * a callback-function may be called which makes
+     * use of them..
+     */
+    dlc           = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+    dlc->drx      = &uart_data->drx_base[0];
+    dlc->dtx      = &uart_data->dtx_base[0];
+    dlc->dlci     = 0;
+    uart_data->dlc_instance[0] = UART_CONTROL_INSTANCE;
+    dlc->priority = 0;
+    dlc->lines    = 0;
+  }
+
+  /*
+   * set DTI connection
+   */
+  dlc->dti_state    = DTI_SETUP;
+
+  uart_data->drx   = dlc->drx;
+  uart_data->dtx   = dlc->dtx;
+#endif /* DTILIB */
+
+#ifdef _SIMULATION_
+  /*
+   * !!! Problem with entity_name which is a pointer in new SAP
+   * !!! therefore we set the peer entity simply to "MMI".
+   * !!! This should be corrected in order to allow test case simulations
+   * !!! with other peer entities.
+   */
+
+#ifdef DTILIB
+  isOK = dti_open(
+    uart_hDTI,
+    uart_data->device,
+    UART_DTI_UP_INTERFACE,
+    dlc_instance,
+    UART_UPLINK_QUEUE_SIZE,
+    uart_dti_req->direction,
+    DTI_QUEUE_UNUSED,
+    DTI_VERSION_10,
+    "MMI",
+    uart_dti_req->link_id
+    );
+#else  /* DTILIB */
+  hCommUPLINK = vsi_c_open (VSI_CALLER "MMI");
+#endif /* DTILIB */
+#else /* _SIMULATION_ */
+  /*
+   * open new communication channel
+   */
+#ifdef DTILIB
+  isOK = dti_open(
+    uart_hDTI,
+    uart_data->device,
+    UART_DTI_UP_INTERFACE,
+    dlc_instance,
+    UART_UPLINK_QUEUE_SIZE,
+    uart_dti_req->direction,
+    DTI_QUEUE_UNUSED,
+    DTI_VERSION_10,
+    (U8*)(uart_dti_req->entity_name),
+    uart_dti_req->link_id
+    );
+#else  /* DTILIB */
+  hCommUPLINK = vsi_c_open (VSI_CALLER
+                            (char *)(uart_dti_req->entity_name));
+#endif /* DTILIB */
+#endif /* _SIMULATION_ */
+
+
+#ifdef DTILIB
+  if(!isOK)
+  /* error?! */
+  /*
+   * NOTE: internal initialization of the new communication channel
+   * is done in sig_dti_ker_connection_opened() when using DTILIB
+   *
+   * when debugging the below code, please also have a look there!!
+   */
+#else  /* DTILIB */
+  uart_data->tui_uart = uart_dti_req->tui_uart;
+  if(hCommUPLINK >= VSI_OK)
+  {
+    PALLOC (uart_dti_cnf, UART_DTI_CNF);
+    /*
+     * send confirm primitive
+     */
+    uart_dti_cnf->device = uart_data->device;
+    uart_dti_cnf->dlci   = uart_dti_req->dlci;
+    uart_dti_cnf->dti_conn = UART_CONNECT_DTI;
+    PSEND (hCommMMI, uart_dti_cnf);
+    /*
+     * initialize new communication channel
+     */
+    switch( GET_STATE( UART_SERVICE_KER ) )
+    {
+      case KER_DEAD:
+        SET_STATE( UART_SERVICE_KER, KER_READY );
+        /*
+         * enable UART
+         */
+#ifdef _SIMULATION_
+        {
+          /*
+           * send DTI_GETDATA_REQ
+           */
+          PALLOC (dti_getdata_req, DTI2_GETDATA_REQ);
+          dti_getdata_req->tui    = 2; /* for enable */
+          dti_getdata_req->c_id   = 0;
+          dti_getdata_req->op_ack = 0;
+          PSEND (hCommMMI, dti_getdata_req);
+        }
+#else /* _SIMULATION_ */
+#ifndef FF_MULTI_PORT
+        if((ret=UF_Enable (uart_data->device, TRUE)) NEQ UF_OK)
+        {
+          TRACE_ERROR_P2("UF Driver: Can't enable UART, [%d], uart_kerp.c(%d)",
+                                                                 ret,__LINE__);
+        }
+#endif /* !FF_MULTI_PORT */
+#endif /* _SIMULATION */
+        /*
+         * set dlc values
+         */
+        dlc           = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+        dlc->drx      = &uart_data->drx_base[0];
+        dlc->dtx      = &uart_data->dtx_base[0];
+        dlc->dlci     = 0;
+        dlc->priority = 0;
+        dlc->lines    = 0;
+        /*
+         * set RX and TX in ready mode
+         */
+        sig_ker_rx_ready_mode_req();
+        sig_ker_tx_ready_mode_req();
+        /*
+         * set DTI connection
+         */
+        dlc->hCommUPLINK = hCommUPLINK;
+        uart_data->drx   = dlc->drx;
+        uart_data->dtx   = dlc->dtx;
+        sig_ker_drx_ready_mode_req(UART_CONTROL_INSTANCE);
+        sig_ker_dtx_ready_mode_req(UART_CONTROL_INSTANCE);
+        sig_ker_drx_set_dti_peer_req(uart_dti_req->tui_peer,
+                                     hCommUPLINK,
+                                     uart_dti_req->c_id);
+        sig_ker_dtx_set_dti_peer_req(uart_dti_req->tui_peer,
+                                     hCommUPLINK,
+                                     uart_dti_req->c_id);
+
+        break;
+
+      case KER_READY:
+      case KER_MUX:
+        dlc->hCommUPLINK = hCommUPLINK;
+        uart_data->drx   = dlc->drx;
+        uart_data->dtx   = dlc->dtx;
+        sig_ker_drx_set_dti_peer_req(uart_dti_req->tui_peer,
+                                     hCommUPLINK,
+                                     uart_dti_req->c_id);
+        sig_ker_dtx_set_dti_peer_req(uart_dti_req->tui_peer,
+                                     hCommUPLINK,
+                                     uart_dti_req->c_id);
+        break;
+
+      default:
+        TRACE_ERROR( "UART_DTI_REQ unexpected" );
+        break;
+    }
+  }
+  else /* UPLINK OK   */
+#endif /* DTILIB */
+  {
+    /*
+     * send error primitive if communication channel is not opened
+     */
+    PALLOC (uart_error_ind, UART_ERROR_IND);
+    uart_error_ind->device = uart_data->device;
+    uart_error_ind->dlci   = uart_dti_req->dlci;
+    uart_error_ind->error  = UART_ERROR_NO_CHANNEL;
+    PSEND (hCommMMI, uart_error_ind);
+  }
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_dti_req);
+} /* ker_uart_dti_req() */
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_disable_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_DISABLE_REQ
+|
+| Parameters  : *uart_disable_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_disable_req ( T_UART_DISABLE_REQ *uart_disable_req )
+{
+  UBYTE   i;
+  T_DLC*  dlc;
+
+  TRACE_FUNCTION( "ker_uart_disable_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_disable_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_disable_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_disable_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_disable_req=%08x is not allocated",
+                    uart_disable_req);
+  }
+  else if(uart_disable_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_disable_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_disable_req->device];
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_disable_req);
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_READY:
+      /*
+       * flush all still to send data
+       */
+      uart_data->ker.received_prim|= UART_DISABLE_REQ_MASK;
+      uart_data->ker.flush_state   = UART_KER_DRX_FLUSH;
+      dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+      dlc->flushed   = FALSE;
+      uart_data->drx = dlc->drx;
+      sig_ker_drx_flush_req();
+      break;
+
+    case KER_MUX:
+    case KER_MUX_ESTABLISH:
+    case KER_MUX_DLC_CLOSING:
+    case KER_MUX_CLOSING:
+    case KER_MUX_CLOSED:
+      /*
+       * flush all still to send data
+       */
+      uart_data->ker.received_prim|= UART_DISABLE_REQ_MASK;
+      uart_data->ker.flush_state   = UART_KER_DRX_FLUSH;
+      /*
+       * mark all to flush DLCs
+       */
+      for(i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++)
+      {
+        dlc = &uart_data->dlc_table[i];
+        if((i EQ UART_CONTROL_INSTANCE) ||
+           (dlc->connection_state EQ UART_CONNECTION_OPEN))
+        {
+          dlc->flushed = FALSE;
+        }
+      }
+      /*
+       * initiate flush in all to flushed DLCs
+       */
+      for(i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++)
+      {
+        dlc = &uart_data->dlc_table[i];
+        if(dlc->flushed NEQ TRUE)
+        {
+          if(i EQ UART_CONTROL_INSTANCE)
+          {
+            if(uart_data->ker.tx_data_desc EQ NULL)
+              sig_any_ker_flushed_ind(UART_CONTROL_INSTANCE);
+          }
+          else
+          {
+            uart_data->drx = dlc->drx;
+            sig_ker_drx_flush_req();
+          }
+        }
+      }
+      break;
+
+    case KER_DEAD:
+      /*
+       * send confirm primitive
+       */
+      {
+        PALLOC (uart_disable_cnf, UART_DISABLE_CNF);
+        uart_disable_cnf->device = uart_data->device;
+        PSEND (hCommMMI, uart_disable_cnf);
+      }
+      break;
+
+    default:
+      TRACE_ERROR( "UART_DISABLE_REQ unexpected" );
+      break;
+  }
+} /* ker_uart_disable_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_ring_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_RING_REQ
+|
+| Parameters  : *uart_ring_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_ring_req ( T_UART_RING_REQ *uart_ring_req )
+{
+  T_DLC*  dlc;
+
+  TRACE_FUNCTION( "ker_uart_ring_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_ring_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_ring_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_ring_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_ring_req=%08x is not allocated",
+                    uart_ring_req);
+  }
+  else if(uart_ring_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_ring_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_ring_req->device];
+
+  /*
+   * set DLC instance
+   */
+  if((GET_STATE( UART_SERVICE_KER )) EQ KER_READY)
+    dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+  else
+    dlc = &uart_data->dlc_table[uart_data->
+                      dlc_instance[uart_ring_req->dlci]];
+
+  /*
+   * store new line states
+   */
+  if(uart_ring_req->line_state EQ UART_LINE_ON)
+  {
+    TRACE_EVENT_P1("RING: on - DLCI=%d", uart_ring_req->dlci);
+    dlc->lines|= UART_RI_MASK;
+  }
+  else
+  {
+    TRACE_EVENT_P1("RING: off - DLCI=%d", uart_ring_req->dlci);
+    dlc->lines&= ~(UART_RI_MASK);
+  }
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_ring_req);
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_READY:
+    case KER_MUX:
+      /*
+       * flush all still to send data
+       */
+      dlc->received_prim        |= UART_RING_REQ_MASK;
+      uart_data->ker.flush_state = UART_KER_DRX_FLUSH;
+      dlc->flushed   = FALSE;
+      uart_data->drx = dlc->drx;
+      sig_ker_drx_flush_req();
+      break;
+
+    default:
+      TRACE_ERROR( "UART_RING_REQ unexpected" );
+      break;
+  }
+} /* ker_uart_ring_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_dcd_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_DCD_REQ
+|
+| Parameters  : *uart_dcd_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_dcd_req ( T_UART_DCD_REQ *uart_dcd_req )
+{
+  T_DLC*  dlc;
+
+  TRACE_FUNCTION( "ker_uart_dcd_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_dcd_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_dcd_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_dcd_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_dcd_req=%08x is not allocated",
+                    uart_dcd_req);
+  }
+  else if(uart_dcd_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_dcd_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_dcd_req->device];
+
+  /*
+   * set DLC instance
+   */
+  if((GET_STATE( UART_SERVICE_KER )) EQ KER_READY)
+    dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+  else
+    dlc = &uart_data->dlc_table[uart_data->
+                      dlc_instance[uart_dcd_req->dlci]];
+
+  /*
+   * store new line states
+   */
+  if(uart_dcd_req->line_state EQ UART_LINE_ON)
+  {
+    TRACE_EVENT_P1("DCD: on - DLCI=%d", uart_dcd_req->dlci);
+    dlc->lines&= ~(UART_DCD_MASK);
+  }
+  else
+  {
+    TRACE_EVENT_P1("DCD: off - DLCI=%d", uart_dcd_req->dlci);
+    dlc->lines|= UART_DCD_MASK;
+  }
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_dcd_req);
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_READY:
+    case KER_MUX:
+      /*
+       * flush all still to send data
+       */
+      dlc->received_prim        |= UART_DCD_REQ_MASK;
+      uart_data->ker.flush_state = UART_KER_DRX_FLUSH;
+      dlc->flushed   = FALSE;
+      uart_data->drx = dlc->drx;
+      sig_ker_drx_flush_req();
+      break;
+
+    default:
+      TRACE_ERROR( "UART_DCD_REQ unexpected" );
+      break;
+  }
+} /* ker_uart_dcd_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_escape_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_ESCAPE_REQ
+|
+| Parameters  : *uart_escape_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_escape_req ( T_UART_ESCAPE_REQ *uart_escape_req )
+{
+
+  TRACE_FUNCTION( "ker_uart_escape_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_escape_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_escape_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_escape_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_escape_req=%08x is not allocated",
+                    uart_escape_req);
+  }
+  else if(uart_escape_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_escape_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_escape_req->device];
+
+  /*
+   * set DLC instance
+   */
+/* Following part of code is not required so put under comment ,but may be used 
+  *  in future
+  */  
+ /*
+  if((GET_STATE( UART_SERVICE_KER )) EQ KER_READY)
+    dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+  else
+    dlc = &uart_data->dlc_table[uart_data->
+                      dlc_instance[uart_escape_req->dlci]];
+*/
+  /*
+   * Send confirmation to ACI
+   */
+  {
+    PALLOC (uart_escape_cnf, UART_ESCAPE_CNF);
+
+    uart_escape_cnf->device = uart_escape_req->device;
+    uart_escape_cnf->dlci = uart_escape_req->dlci;
+
+    PSEND (hCommMMI, uart_escape_cnf);
+  }
+
+  /*
+   * TODO: Set escape on/off parameter in dtx,
+   *       Call UF_SetEscape and handle/stop ongoing
+   *       escape sequence detection if required
+   */
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_escape_req);
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_READY:
+    case KER_MUX:
+      break;
+
+    default:
+      TRACE_ERROR( "UART_ESCAPE_REQ unexpected" );
+      break;
+  }
+} /* ker_uart_escape_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_mux_start_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_MUX_START_REQ
+|
+| Parameters  : *uart_mux_start_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_mux_start_req ( T_UART_MUX_START_REQ *uart_mux_start_req )
+{
+  T_DLC*  dlc;
+#ifndef  _SIMULATION_
+  USHORT  ret;
+#endif
+  TRACE_FUNCTION( "ker_uart_mux_start_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_mux_start_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_mux_start_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_mux_start_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_mux_start_req=%08x is not allocated",
+                    uart_mux_start_req);
+  }
+  else if(uart_mux_start_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_mux_start_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_mux_start_req->device];
+
+  /*
+   * set parameters
+   */
+  uart_data->n1     = uart_mux_start_req->n1;
+  uart_data->ker.n2 = uart_mux_start_req->n2;
+  sig_ker_rt_parameters_req(uart_mux_start_req->t1,
+                            uart_mux_start_req->t2,
+                            uart_mux_start_req->t3);
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_mux_start_req);
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_READY:
+      /*
+       * flush all still to send data
+       */
+      uart_data->ker.received_prim|= UART_MUX_START_REQ_MASK;
+      uart_data->ker.flush_state   = UART_KER_DRX_FLUSH;
+      dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+      dlc->flushed   = FALSE;
+      uart_data->drx = dlc->drx;
+      sig_ker_drx_flush_req();
+      break;
+
+    case KER_DEAD:
+      SET_STATE( UART_SERVICE_KER, KER_MUX_ESTABLISH );
+#ifdef _SIMULATION_
+      {
+        /*
+         * send DTI_GETDATA_REQ
+         */
+        PALLOC (dti_getdata_req, DTI2_GETDATA_REQ);
+#ifdef DTI2
+          dti_getdata_req->link_id = LINK_ENABLE_PORT_1; /* for enable */
+#else  /* DTI2 */
+          dti_getdata_req->tui    = 2; /* for enable */
+          dti_getdata_req->c_id   = 0;
+          dti_getdata_req->op_ack = 0;
+#endif /* DTI2 */
+        PSEND (hCommMMI, dti_getdata_req);
+      }
+#else /* _SIMULATION_ */
+#ifndef FF_MULTI_PORT
+      if((ret = UF_Enable (uart_data->device, TRUE)) NEQ UF_OK)
+      {
+          TRACE_ERROR_P2("UF Driver: Can't enable UART, [%d], uart_kerp.c(%d)",
+                                                                 ret,__LINE__);
+      }
+#endif /* !FF_MULTI_PORT */
+#endif /* _SIMULATION */
+
+      /*
+       * set RX and TX service in mux mode
+       */
+      sig_ker_rx_mux_mode_req();
+      sig_ker_tx_mux_mode_req();
+      /*
+       * start reception
+       */
+      MALLOC(uart_data->ker.rx_data_desc, (USHORT)(sizeof(T_desc2) -
+                                           1 +
+                                           uart_data->n1 +
+                                           2));
+      uart_data->ker.rx_data_desc->next = (ULONG)NULL;
+      uart_data->ker.rx_data_desc->len  = 0;
+      sig_ker_rx_ready_to_receive_req(uart_data->ker.rx_data_desc,
+                                      0,
+                                      (USHORT)(uart_data->n1 + 2));
+      /*
+       * start timer
+       */
+      sig_ker_rt_start_t3_req();
+
+      /*
+       * send confirm primitive
+       */
+      {
+        PALLOC (uart_mux_start_cnf, UART_MUX_START_CNF);
+        uart_mux_start_cnf->device = uart_data->device;
+        PSEND (hCommMMI, uart_mux_start_cnf);
+      }
+      break;
+
+    default:
+      TRACE_ERROR( "UART_MUX_START_REQ unexpected" );
+      break;
+  }
+} /* ker_uart_mux_start_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_mux_dlc_establish_res
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_MUX_DLC_ESTABLISH_RES
+|
+| Parameters  : *uart_mux_dlc_establish_res - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_mux_dlc_establish_res (
+              T_UART_MUX_DLC_ESTABLISH_RES *uart_mux_dlc_establish_res )
+{
+  T_desc2* temp_desc;
+  T_DLC*   dlc;
+
+  TRACE_FUNCTION( "uart_mux_dlc_establish_res" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_mux_dlc_establish_res EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_mux_dlc_establish_res is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_mux_dlc_establish_res
+                            - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_mux_dlc_establish_res=%08x is not allocated",
+                    uart_mux_dlc_establish_res);
+  }
+  else if(uart_mux_dlc_establish_res->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_mux_dlc_establish_res->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_mux_dlc_establish_res->device];
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_MUX:
+      dlc = &uart_data->dlc_table[uart_data->
+             dlc_instance[uart_mux_dlc_establish_res->dlci]];
+      dlc->connection_state = UART_CONNECTION_OPEN;
+      /*
+       * send UA response
+       */
+      temp_desc         = dlc->next_command;
+      dlc->next_command = NULL;
+      ker_mux_send_frame(temp_desc);
+      /*
+       * start Data services
+       */
+      uart_data->drx = dlc->drx;
+      uart_data->dtx = dlc->dtx;
+      sig_ker_drx_ready_mode_req(uart_data->
+        dlc_instance[uart_mux_dlc_establish_res->dlci]);
+      sig_ker_dtx_ready_mode_req(uart_data->
+        dlc_instance[uart_mux_dlc_establish_res->dlci]);
+      break;
+
+    default:
+      TRACE_ERROR( "UART_MUX_DLC_ESTABLISH_RES unexpected" );
+      break;
+  }
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_mux_dlc_establish_res);
+} /* uart_mux_dlc_establish_res() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_mux_dlc_release_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_MUX_DLC_RELEASE_REQ
+|
+| Parameters  : *ker_uart_mux_dlc_release_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_mux_dlc_release_req (
+              T_UART_MUX_DLC_RELEASE_REQ *uart_mux_dlc_release_req )
+{
+  T_desc2* temp_desc;
+  T_DLC*   dlc;
+  UBYTE    dlc_instance; /* channel */
+
+  TRACE_FUNCTION( "ker_uart_mux_dlc_release_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_mux_dlc_release_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_mux_dlc_release_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_mux_dlc_release_req
+                            - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_mux_dlc_release_req=%08x is not allocated",
+                    uart_mux_dlc_release_req);
+  }
+  else if(uart_mux_dlc_release_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_mux_dlc_release_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_mux_dlc_release_req->device];
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_MUX:
+      dlc_instance = uart_data->dlc_instance[uart_mux_dlc_release_req->dlci];
+      dlc = &uart_data->dlc_table[dlc_instance];
+      /*
+       * close DTI connection
+       */
+      uart_data->drx = dlc->drx;
+      uart_data->dtx = dlc->dtx;
+      sig_ker_drx_dead_mode_req();
+      sig_ker_dtx_dead_mode_req();
+#ifdef DTILIB
+      if(dlc->dti_state NEQ DTI_CLOSED)
+      {
+      dti_close(
+        uart_hDTI,
+        uart_data->device,
+        UART_DTI_UP_INTERFACE,
+        dlc_instance,
+        FALSE
+        );
+        dlc->dti_state = DTI_CLOSED;
+      }
+#else  /* DTILIB */
+      if(dlc->hCommUPLINK NEQ VSI_ERROR)
+      {
+        vsi_c_close (VSI_CALLER dlc->hCommUPLINK);
+        dlc->hCommUPLINK = VSI_ERROR;
+      }
+#endif /* DTILIB */
+      switch(dlc->connection_state)
+      {
+        case UART_CONNECTION_SABM_RCVD:
+          /*
+           * negative response for an UART_MUX_DLC_ESTABLISH_IND
+           * send DM response
+           */
+          temp_desc         = dlc->next_command;
+          dlc->next_command = NULL;
+          temp_desc->buffer[UART_OFFSET_CONTROL] = UART_DM_CONTROL_FRAME
+                          ;/*lint !e415 access of out-of-bounds pointer*/
+          ker_mux_send_frame(temp_desc);
+          ker_mux_dlc_release(dlc_instance);
+          break;
+
+        case UART_CONNECTION_OPEN:
+          dlc->connection_state = UART_CONNECTION_DISC_SENT;
+          ker_send_disc_frame(uart_mux_dlc_release_req->dlci);
+          break;
+        case UART_CONNECTION_DEAD:
+          break;
+
+        default:
+            TRACE_EVENT_P3("Warning: Unexpected DLC connection state: %d - \
+                            %s(%d)", dlc->connection_state, __FILE__, __LINE__);
+          break;
+      }
+      break;
+
+    default:
+      TRACE_ERROR( "UART_MUX_DLC_RELEASE_REQ unexpected" );
+      break;
+  }
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_mux_dlc_release_req);
+} /* ker_uart_mux_dlc_release_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_mux_sleep_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_MUX_SLEEP_REQ
+|
+| Parameters  : *uart_mux_sleep_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_mux_sleep_req (
+              T_UART_MUX_SLEEP_REQ *uart_mux_sleep_req )
+{
+  TRACE_FUNCTION( "uart_mux_sleep_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_mux_sleep_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_mux_sleep_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_mux_sleep_req
+                            - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_mux_sleep_req=%08x is not allocated",
+                    uart_mux_sleep_req);
+  }
+  else if(uart_mux_sleep_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_mux_sleep_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_mux_sleep_req->device];
+
+  /*
+   * Primitive UART_MUX_SLEEP_REQ is not supported
+   */
+  TRACE_ERROR( "UART_MUX_SLEEP_REQ unexpected" );
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_mux_sleep_req);
+} /* ker_uart_mux_sleep_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_mux_wakeup_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_MUX_WAKEUP_REQ
+|
+| Parameters  : *uart_mux_wakeup_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_mux_wakeup_req (
+              T_UART_MUX_WAKEUP_REQ *uart_mux_wakeup_req )
+{
+  TRACE_FUNCTION( "ker_uart_mux_wakeup_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_mux_wakeup_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_mux_wakeup_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_mux_wakeup_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_mux_wakeup_req=%08x is not allocated",
+                    uart_mux_wakeup_req);
+  }
+  else if(uart_mux_wakeup_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_mux_wakeup_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_mux_wakeup_req->device];
+  /*
+   * Primitive UART_MUX_WAKEUP_REQ is not supported
+   */
+  TRACE_ERROR( "UART_MUX_WAKEUP_REQ unexpected" );
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_mux_wakeup_req);
+} /* ker_uart_mux_wakeup_req() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : ker_uart_mux_close_req
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_MUX_CLOSE_REQ
+|
+| Parameters  : *uart_mux_close_req - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void ker_uart_mux_close_req (
+              T_UART_MUX_CLOSE_REQ *uart_mux_close_req )
+{
+  UBYTE    i;
+  T_DLC*   dlc;
+  T_desc2* temp_desc;
+  BOOL     continuous;
+
+
+  TRACE_FUNCTION( "ker_uart_mux_close_req" );
+
+#ifdef UART_RANGE_CHECK
+  if(uart_mux_close_req EQ NULL)
+  {
+    TRACE_EVENT("ERROR: uart_mux_close_req is NULL");
+  }
+  else if((*((ULONG*)((UBYTE*)uart_mux_close_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0)
+  {
+    TRACE_EVENT_P1("ERROR: uart_mux_close_req=%08x is not allocated",
+                    uart_mux_close_req);
+  }
+  else if(uart_mux_close_req->device >= UART_INSTANCES)
+  {
+    TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d",
+                    uart_mux_close_req->device,
+                    UART_INSTANCES);
+  }
+#endif /* UART_RANGE_CHECK */
+
+  /*
+   * set UART instance
+   */
+  uart_data = &uart_data_base[uart_mux_close_req->device];
+
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_MUX_ESTABLISH:
+      SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSED );
+      /*
+       * stop timers and
+       * remove all DLC instances
+       */
+      ker_mux_close_down();
+      if(uart_data->ker.tx_data_desc EQ NULL)
+      {
+        uart_data->ker.received_prim|= UART_MUX_CLOSE_REQ_MASK;
+
+        if(uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING)
+        {
+          uart_data->ker.flush_state = UART_KER_TX_FLUSH;
+          sig_ker_tx_flush_req();
+        }
+      }
+      break;
+
+    case KER_MUX:
+      SET_STATE( UART_SERVICE_KER, KER_MUX_DLC_CLOSING );
+      /*
+       * close all VSI channels and Data services
+       */
+      continuous = TRUE;
+      for(i = 0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++)
+      {
+        dlc = &uart_data->dlc_table[i];
+        /*
+         * close all DLC channels except Control channel
+         */
+        if(i NEQ UART_CONTROL_INSTANCE)
+        {
+          switch(dlc->connection_state)
+          {
+            case UART_CONNECTION_SABM_RCVD:
+              /*
+               * send DM response
+               */
+              temp_desc         = dlc->next_command;
+              dlc->next_command = NULL;
+              temp_desc->buffer[UART_OFFSET_CONTROL] = UART_DM_CONTROL_FRAME
+                               ;/*lint !e415 access of out-of-bounds pointer*/
+              ker_mux_send_frame(temp_desc);
+              ker_mux_dlc_release(i);
+              break;
+
+            case UART_CONNECTION_OPEN:
+              dlc->connection_state = UART_CONNECTION_DISC_SENT;
+              ker_send_disc_frame(dlc->dlci);
+              continuous = FALSE;
+              break;
+
+            case UART_CONNECTION_DISC_SENT:
+              continuous = FALSE;
+              break;
+
+            case UART_CONNECTION_DEAD:
+              break;
+
+            default:
+              TRACE_EVENT_P3("Warning: Unexpected DLC connection state: %d - \
+                             %s(%d)",dlc->connection_state,__FILE__, __LINE__);
+              break;
+          }
+        }
+      }
+      if(continuous EQ TRUE)
+      {
+        SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSING );
+        /*
+         * build and send CLD command frame:
+         */
+        ker_mux_send_close_down();
+        /*
+         * start timer
+         */
+        sig_ker_rt_start_t3_req();
+      }
+      break;
+
+    case KER_MUX_DLC_CLOSING:
+    case KER_MUX_CLOSING:
+    case KER_MUX_CLOSED:
+      break;
+
+    default:
+      TRACE_ERROR( "UART_MUX_CLOSE_REQ unexpected" );
+      break;
+  }
+
+  /*
+   * free the received primitive
+   */
+  PFREE(uart_mux_close_req);
+
+} /* ker_uart_mux_close_req() */
+
+
+
+#ifdef DTILIB
+/*
++------------------------------------------------------------------------------
+| Function    : sig_dti_ker_connection_opened_ind
++------------------------------------------------------------------------------
+| Description : Handles the DTILIB callback call DTI_REASON_CONNECTION_OPENED
+|
+|               This signal means that a dti connection has been successfully opened.
+|
+| Parameter   : dlc_instance
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void sig_dti_ker_connection_opened_ind (UBYTE dlc_instance)
+{
+#ifndef _SIMULATION_
+  USHORT ret;
+#endif
+  PALLOC (uart_dti_cnf, UART_DTI_CNF);
+
+  TRACE_FUNCTION( "sig_dti_ker_connection_opened_ind" );
+
+  /*
+   * send confirm primitive
+   */
+  uart_dti_cnf->device = uart_data->device;
+  uart_dti_cnf->dlci   = uart_data->dlc_table[dlc_instance].dlci; /* EQ dlci */
+  uart_dti_cnf->dti_conn = UART_CONNECT_DTI;
+  PSEND (hCommMMI, uart_dti_cnf);
+
+  /*
+   * initialize new communication channel
+   */
+  switch( GET_STATE( UART_SERVICE_KER ) )
+  {
+    case KER_DEAD:
+      SET_STATE( UART_SERVICE_KER, KER_READY );
+      /*
+       * enable UART
+       */
+#ifdef _SIMULATION_
+      {
+        /*
+         * send DTI_GETDATA_REQ
+         */
+        PALLOC (dti_getdata_req, DTI2_GETDATA_REQ);
+#ifdef DTI2
+        dti_getdata_req->link_id = LINK_ENABLE_PORT_1; /* for enable */
+#else  /* DTI2 */
+        dti_getdata_req->tui    = 2; /* for enable */
+        dti_getdata_req->c_id   = 0;
+        dti_getdata_req->op_ack = 0;
+#endif /* DTI2 */
+        PSEND (hCommMMI, dti_getdata_req);
+      }
+#else /* _SIMULATION_ */
+      if((ret = UF_Enable (uart_data->device, TRUE)) NEQ UF_OK)
+      {
+          TRACE_ERROR_P2("UF Driver: Can't enable UART, [%d], uart_kerp.c(%d)",
+                                                                 ret,__LINE__);
+      }
+#endif /* _SIMULATION */
+
+      /*
+       * set RX and TX in ready mode
+       */
+      sig_ker_rx_ready_mode_req();
+      sig_ker_tx_ready_mode_req();
+
+      /*
+       * set DTI connection
+       */
+      sig_ker_drx_ready_mode_req(UART_CONTROL_INSTANCE);
+      sig_ker_dtx_ready_mode_req(UART_CONTROL_INSTANCE);
+      sig_ker_drx_set_dtilib_peer_req();
+      sig_ker_dtx_set_dtilib_peer_req();
+      break;
+
+    case KER_READY:
+    case KER_MUX:
+      sig_ker_drx_set_dtilib_peer_req();
+      sig_ker_dtx_set_dtilib_peer_req();
+      break;
+
+    default:
+      TRACE_ERROR( "UART_DTI_REQ unexpected" );
+      break;
+  }
+} /* sig_dti_ker_connection_opened_ind */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : sig_dti_ker_connection_closed_ind
++------------------------------------------------------------------------------
+| Description : Handles the DTILIB callback call DTI_REASON_CONNECTION_CLOSED
+|
+|               This signal means that a dti connection has been closed by
+|               the neighbour entity.
+|
+| Parameters  : dlc_instance - affected dlc instance
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void sig_dti_ker_connection_closed_ind (U8 dlc_instance)
+{
+  T_DLC *dlc;
+
+  TRACE_FUNCTION( "sig_dti_ker_connection_closed_ind" );
+
+  /*
+   * set DLC
+   */
+  dlc = &uart_data->dlc_table[dlc_instance];
+  uart_data->drx = dlc->drx;
+  uart_data->dtx = dlc->dtx;
+  /*
+   * set DTI connection to closed state
+   * if it is already closed, do nothing
+   */
+  if(dlc->dti_state NEQ DTI_CLOSED)
+  {
+    dlc->dti_state = DTI_CLOSED;
+    sig_ker_drx_disconnected_mode_req();
+    sig_ker_dtx_disconnected_mode_req();
+    /*
+     * inform MMI
+     */
+    {
+      PALLOC (uart_dti_ind, UART_DTI_IND);
+      uart_dti_ind->device = uart_data->device;
+      uart_dti_ind->dlci   = dlc->dlci;
+      uart_dti_ind->dti_conn = UART_DISCONNECT_DTI;
+      PSEND (hCommMMI, uart_dti_ind);
+    }
+  }
+} /* sig_dti_ker_connection_closed_ind */
+#endif /* DTILIB */