view gsm-fw/L1/include/l1_const.h @ 1009:009d5bf2ff4c

rvinterf/lowlevel: formatting of FC-specific packet types split off into format_fc.c
author Mychaela Falconia <falcon@ivan.Harhan.ORG>
date Sun, 20 Mar 2016 20:23:54 +0000
parents 10b4bed10192
children
line wrap: on
line source

 /************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1_CONST.H
 *
 *        Filename l1_const.h
 *  Copyright 2003 (C) Texas Instruments
 *
 ************* Revision Controle System Header *************/
#ifndef  L1_CONST_H
#define  L1_CONST_H

#ifdef __MSDOS__              // Running BORLANDC compiler.
  #ifdef MVC
    #define EXIT exit(0)
    #define FAR
  #else
    #define EXIT DOS_Exit(0)
    #define FAR far
  #endif
#else                         // Running ARM compiler.
  #define FAR
  #define EXIT exit(0)
  #undef  stricmp	// appease gcc
  #define stricmp strcmp
#endif


#if (CODE_VERSION != SIMULATION)
  #undef  NULL		// appease gcc
  #define NULL                0
#endif

#define NO_PAR                0

#define NO_TASK               0
#define ALL_TASK              0xffffffff
#define ALL_PARAM             0xffffffff

#define TRUE                  1
#define TRUE_L                1L
#define FALSE                 0

#define NOT_PENDING           0
#define PENDING               1

#define INACTIVE              2
#define ACTIVE                3
#define RE_ENTERED            4
#define WAIT_IQ               5

//---------------------------------------------
// MCU-DSP bit-field bit position definitions
//---------------------------------------------
#if L1_GPRS
  #define GPRS_SCHEDULER     1  // Select GPRS scheduler
#endif
#define GSM_SCHEDULER        2  // Select GSM  scheduler

//-----------------------------
// POWER MANAGEMENT............
//-----------------------------
#define MIN_SLEEP_TIME  (SETUP_FRAME+2+l1_config.params.rf_wakeup_tpu_scenario_duration) //HW WAKE-UP+MIN_SLEEP(2)+AFC RESTORE(rf_wakeup_tpu_scenario_duration)
#define TPU_LOAD              01
#define TPU_FREEZE            02

// SLEEP ALGO SWITCH
#define NO_SLEEP              00   // ------ + ------ + ------
#define SMALL_SLEEP           01   // SMALL  + ------ + ------
#define BIG_SLEEP             02   // ------ +   BIG  + ------
#define DEEP_SLEEP            03   // ------ +   BIG  +  DEEP
#define ALL_SLEEP             04   // SMALL  +   BIG  +  DEEP

// GAUGING SAMPLES
#define SIZE_HIST             10
#define MAX_BAD_GAUGING        3

// GAUG_IN_32T =  (HF in clock of 13Mhz*dpll) * ( LF in Khz)
// Leonardo version had it set to 1348, but TCS3.2 (LoCosto) has it set
// to 605 instead.  I'll revert it to the Leonardo value for now.
// -- Space Falcon
#define GAUG_IN_32T           1348   // gauging duration is 1348*T32 measured on eva4

// DSP state need to be used to enter Deep Sleep mode
#if (W_A_DSP_IDLE3 == 1)
  #define C_DSP_IDLE3           3
#endif

//-------------------------------------------------
// INIT: value is 32.768Khz at [-500 ppm, +100 ppm]
//       to face temperature variation
//
// ACQUIS: variations allowed 32.768Khz +- 50 ppm
  // 9 frames gauging is 1348*T32 (measured on eva4)
// UPDATE: variation allowed is +- 6 ppm jitter
//-------------------------------------------------

#define MCUCLK                13000       // 13 Mhz
#define LF                    32.768
#define LF_100PPM             32.7712768  // 32.768*(1+100*10E-6)
#define LF_500PPM             32.751616   // 32.768*(1-500*10E-6)
#define LF_50PPM              32.7696384  // 32.768*(1+50*10E-6)
#define LF_6PPM               32.76819661 // 32.768*(1+6*10E-6)

#define NB_INIT               5           // nbr of gauging to pass to ACQUIS
#define NB_ACQU               10          // nbr of gauging to pass to UPDATE

#if (CHIPSET ==2 || CHIPSET ==3 || CHIPSET == 5 || CHIPSET == 6 || CHIPSET == 9) // PLL is at 65 Mhz !!!!!!
  #define PLL                5           // 5*13Mhz = 65 Mhz
  //-------------------------------------------------
  // INIT: value is 32.768Khz at [-500 ppm, +100 ppm]
  //
  // ACQUIS: variations allowed 32.768Khz +- 50 ppm
  // 9 frames gauging is 1348*T32 (measured on eva4)
  // UPDATE: variation allowed is +- 6 ppm jitter
  //-------------------------------------------------
  #define C_CLK_MIN             1983     // 65000/32.7712768 = 1983.444234
  #define C_CLK_INIT_MIN        29113    // 0.444234*2^16
  #define C_CLK_MAX             1984     // 65000 / 32.751616 = 1984.634896
  #define C_CLK_INIT_MAX        41608    // 0.634896*2^16
  #define C_DELTA_HF_ACQUIS     130      // 1348/32.768-1348/32.7696384 = 0.002056632ms
                                         // 0.002056632/0.0001538 = 130 T65Mhz
  #define C_DELTA_HF_UPDATE     15       // 1348/32.768-1348/32.76819661 =0.00024691ms
                                         // 0.00024691/0.0001538 = 15 T65Mhz
#endif

#define ARMIO_CLK_CUT       0x0001
#define UWIRE_CLK_CUT       0x0002

//-----------------------------
// Neighbour cell sync. reading
//-----------------------------
#if (L1_12NEIGH)
 #define NBR_NEIGHBOURS      12
#else
 #define NBR_NEIGHBOURS       6
#endif

//-----------------------------
// LAYER 1 MEASUREMENT TASKS...
//-----------------------------
#define NBR_L1S_MEAS_TASKS    4

#define FSMS                  0
#define I_BAMS                1
#define D_BAMS                2
#define SERVMS                3

#define FSMS_MEAS             (TRUE_L << FSMS)              // Measurement task on FULL list (Cell Selection/Idle).
#define I_BAMS_MEAS           (TRUE_L << I_BAMS)            // Measurement task on BA list in Idle.
#define D_BAMS_MEAS           (TRUE_L << D_BAMS)            // Measurement task on BA list in Dedicated.
#define SERVMS_MEAS           (TRUE_L << SERVMS)            // Measurement task for Serving.

#define FSMS_MEAS_MASK        ALL_TASK ^ FSMS_MEAS
#define I_BAMS_MEAS_MASK      ALL_TASK ^ I_BAMS_MEAS
#define D_BAMS_MEAS_MASK      ALL_TASK ^ D_BAMS_MEAS
#define SERVMS_MEAS_MASK      ALL_TASK ^ SERVMS_MEAS

#define A_D_BLEN              456                           // SACCH/SDCCH data block length (GSM 5.01 $7)
#define TCH_FS_BLEN           378                           // TCH FULL SPEECH block length
#define TCH_HS_BLEN           211                           // TCH HALF SPEECH block length
#define TCH_F_D_BLEN          456                           // FACCH, TCH_DATA block length
#define MIN_ACCEPTABLE_SNR_FOR_SB 200  // threshold under which a SB shall be considered as not found

// Define max PM/TDMA according to DSP code and TPU RAM size
//----------------------------------------------------------

// NOTE: we should use a global variable initialized at L1 start and function of rx synth setup time.

#if ((CHIPSET == 2) || (CHIPSET == 3) || (CHIPSET == 4))

  // TPU RAM size limitation

  #define NB_MEAS_MAX       4
  #define NB_MEAS_MAX_GPRS  4

#elif ((CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7)  || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) || (CHIPSET == 15))

  #if (DSP >= 33)

    // DSP code 33: upto 8 PMs with GSM and GPRS scheduler

    #define NB_MEAS_MAX       8
    #define NB_MEAS_MAX_GPRS  8

  #elif (DSP == 32)

    // DSP code prior to code 33 support upto 4 PMs with GSM scheduler
    // and 8 PMs with GPRS scheduler, 6 for DSP 32 because of CPU load

    #define NB_MEAS_MAX       4
    #define NB_MEAS_MAX_GPRS  6

  #else


    // DSP code prior to code 33 support upto 4 PMs with GSM scheduler
    // and 8 PMs with GPRS scheduler

    #define NB_MEAS_MAX       4
    #define NB_MEAS_MAX_GPRS  8

  #endif
#endif
#if (AMR == 1)
  #define SID_UPDATE_BLEN       212                           // SID UPDATE block length
  #define RATSCCH_BLEN          212                           // RATSCCH block length
  #define TCH_AFS_BLEN          448                           // TCH Adaptative Full rate Speech block length
  // Note: the d_nerr value is calculated thanks to the bit class 1 of the block.
  // But the number AHS bit class 1 depends on the type of vocoder currently used (c.f. 5.03 &3.10.7.2)
  #define TCH_AHS_7_95_BLEN     188                           // TCH AHS 7.95 Speech block length
  #define TCH_AHS_7_4_BLEN      196                           // TCH AHS 7.4 Speech block length
  #define TCH_AHS_6_7_BLEN      200                           // TCH AHS 6.7 Speech block length
  #define TCH_AHS_5_9_BLEN      208                           // TCH AHS 5.9 Speech block length
  #define TCH_AHS_5_15_BLEN     212                           // TCH AHS 5.15 Speech block length
  #define TCH_AHS_4_75_BLEN     212                           // TCH AHS 4.75 Speech block length
#endif
//----------------------------------------
// LAYER 1 Asynchronous processes names...
//----------------------------------------
#define NBR_L1A_PROCESSES           63

#define FULL_MEAS                         0   // l1a_full_list_meas_process(msg)
#define CS_NORM                           1   // l1a_cs_bcch_process(msg)
#define I_6MP                             2   // l1a_idle_6strongest_monitoring_process(msg)
#define I_SCP                             3   // l1a_idle_serving_cell_paging_process(msg)
#define I_SCB                             4   // l1a_idle_serving_cell_bcch_reading_process(msg)
#define I_SMSCB                           5   // l1a_idle_smscb_process(msg)
#define CR_B                              6   // l1a_cres_process(msg)
#define ACCESS                            7   // l1a_access_process(msg)
#define DEDICATED                         8   // l1a_dedicated_process(msg)
#define I_FULL_MEAS                       9   // l1a_dedicated_process(msg)
#define I_NMEAS                          10   // l1a_idle_ba_meas_process(msg)
#define DEDIC_6                          11   // l1a_dedic6_process(msg)
#define D_NMEAS                          12   // l1a_dedic_ba_list_meas_process(msg)
#define HW_TEST                          13   // l1a_test_process(msg)
#define I_BCCHN                          14   // l1a_idle_neighbour_cell_bcch_reading_process(msg)
#define I_ADC                            15   // l1a_mmi_adc_req(msg)
#define TMODE_FB0                        16   // l1a_tmode_fb0_process(msg)
#define TMODE_FB1                        17   // l1a_tmode_fb1_process(msg)
#define TMODE_SB                         18   // l1a_tmode_sb_process(msg)
#define TMODE_BCCH                       19   // l1a_tmode_bcch_reading_process(msg)
#define TMODE_RA                         20   // l1a_tmode_access_process(msg)
#define TMODE_DEDICATED                  21   // l1a_tmode_dedicated_process(msg)
#define TMODE_FULL_MEAS                  22   // l1a_tmode_full_list_meas_process(msg)
#define TMODE_PM                         23   // l1a_tmode_meas_process(msg)
#define TMODE_TRANSFER                   24   // l1a_tmode_transfer_process(msg)
#define L1A_KEYBEEP_STATE                25   // l1a_mmi_keybeep_process(msg)
#define L1A_TONE_STATE                   26   // l1a_mmi_tone_process(msg)
#define L1A_MELODY0_STATE                27   // l1a_mmi_melody0_process(msg)
#define L1A_MELODY1_STATE                28   // l1a_mmi_melody1_process(msg)
#define L1A_VM_PLAY_STATE                29   // l1a_mmi_vm_playing_process(msg)
#define L1A_VM_RECORD_STATE              30   // l1a_mmi_vm_recording_process(msg)
#define L1A_SR_ENROLL_STATE              31   // l1a_mmi_sr_enroll_process(msg)
#define L1A_SR_UPDATE_STATE              32   // l1a_mmi_sr_update_process(msg)
#define L1A_SR_RECO_STATE                33   // l1a_mmi_sr_reco_process(msg)
#define L1A_SR_UPDATE_CHECK_STATE        34   // l1a_mmi_sr_update_check_process(msg)
#define L1A_AEC_STATE                    35   // l1a_mmi_aec_process(msg)
#define L1A_FIR_STATE                    36   // l1a_mmi_fir_process(msg)
#define L1A_AUDIO_MODE_STATE             37   // l1a_mmi_audio_mode_process(msg)
#define L1A_MELODY0_E2_STATE             38   // l1a_mmi_melody0_e2_process(msg)
#define L1A_MELODY1_E2_STATE             39   // l1a_mmi_melody1_e2_process(msg)
#define L1A_VM_AMR_PLAY_STATE            40   // l1a_mmi_vm_amr_playing_process(msg)
#define L1A_VM_AMR_RECORD_STATE          41   // l1a_mmi_vm_amr_recording_process(msg)
#define L1A_CPORT_STATE                  42   // l1a_mmi_cport_process(msg)
#define L1A_AUDIO_ONOFF_STATE            43   // l1a_mmi_audio_onoff_process(msg)
#define L1A_GTT_STATE                    44   // l1a_mmi_gtt_process(msg)
#define INIT_L1                          45   // l1a_init_layer1_process(msg)
#define HSW_CONF                         46   // l1a_test_config_process(msg)
#define L1A_MP3_STATE                    47   // l1a_mmi_mp3_process(msg)
#define TMODE_AUDIO_STEREOPATH_DRV_STATE 48   // l1a_tmode_audio_stereopath_process(msg)
#define L1A_EXT_AUDIO_MGT_STATE          49   // l1a_mmi_ext_audio_mgt_process(msg)
#define L1A_ANR_STATE                    50   // l1a_mmi_anr_process(msg)
#define L1A_IIR_STATE                    51   // l1a_mmi_iir_process(msg)
#define L1A_LIMITER_STATE                52   // l1a_mmi_limiter_process(msg)
#define L1A_ES_STATE                     53   // l1a_mmi_es_process(msg)
#define L1A_MIDI_STATE                   54   // l1a_mmi_midi_process(msg)
#define L1A_AGC_UL_STATE                 55   // l1a_mmi_agc_ul_process(msg)
#define L1A_AGC_DL_STATE                 56   // l1a_mmi_agc_dl_process(msg)
#define L1A_DRC_STATE                    57   // l1a_mmi_drc_process(msg)
#define L1A_WCM_STATE                    58   // l1a_mmi_wcm_process(msg)
#define L1A_AAC_STATE                    59   // l1a_mmi_aac_process(msg)
#if (L1_VOCODER_IF_CHANGE == 1)
#define L1A_VOCODER_CFG_STATE            60   // l1a_mmi_vocoder_cfg_process
#endif
#if (L1_PCM_EXTRACTION)
#define L1A_PCM_DOWNLOAD_STATE           61
#define L1A_PCM_UPLOAD_STATE             62
#endif


#if TESTMODE
  #define TMODE_UPLINK            (1<<0)
  #define TMODE_DOWNLINK          (1<<1)
#endif

//------------------------------------
// LAYER 1 DOWNLINK & UPLINK TASKS...
//------------------------------------
#define TASK_DISABLED            0
#define TASK_ENABLED             1

#define SEMAPHORE_RESET          0
#define SEMAPHORE_SET            1

#define NO_NEW_TASK             -1


// Tasks in the order of their priority (low to high).

#if (GSM_IDLE_RAM != 0)
  #define INT_RAM_GSM_IDLE_L1S_PROCESSES1 0x00000618 // PNP, PEP, NP, EP only are supported
#endif


#if !L1_GPRS

#if ((REL99 == 1) && (FF_BHO == 1))
  #define NBR_DL_L1S_TASKS  33
#else //#if ((REL99 == 1) && (FF_BHO == 1))
  #define NBR_DL_L1S_TASKS  32
#endif //#if ((REL99 == 1) && (FF_BHO == 1))

  //GSM_TASKS/
  #define HWTEST       0  // DSP checksum reading
  #define ADC_CSMODE0  1  // ADC task in CS_MODE0 mode
  #define DEDIC        2  // Global Dedicated mode switch
  #define RAACC        3  // Channel access (ul)
  #define RAHO         4  // Handover access (ul)
  #define NSYNC        5  // Global Neighbour cell synchro switch
  #define FBNEW        6  // Frequency burst search (Idle mode)
  #define SBCONF       7  // Synchro. burst confirmation
  #define SB2          8  // Synchro. burst read (1 frame uncertainty / SB position)
  #define FB26         9  // Frequency burst search, dedic/transfer mode MF26 or MF52
  #define SB26        10  // Synchro burst search, dedic/transfer mode MF26 or MF52
  #define SBCNF26     11  // Synchro burst confirmation, dedic/transfer mode MF26 or MF52
  #define FB51        12  // Frequency burst search, dedic mode MF51
  #define SB51        13  // Synchro burst search, dedic MF51
  #define SBCNF51     14  // Synchro burst confirmation, dedic MF51
  #define BCCHN       15  // BCCH Neighbor in GSM Idle
  #define ALLC        16  // All CCCH Reading
  #define EBCCHS      17  // Extended BCCH Serving Reading
  #define NBCCHS      18  // Normal BCCH ServingReading
  #define SMSCB       19  // CBCH serving Reading
  #define NP          20  // Normal paging Reading
  #define EP          21  // Extended pagingReading
  #define ADL         22  // SACCH(SDCCH) DL
  #define AUL         23  // SACCH(SDCCH) UL
  #define DDL         24  // SDCCH DL
  #define DUL         25  // SDCCH UL
  #define TCHD        26  // Dummy for TCH Half rate
  #define TCHA        27  // SACCH(TCH)
  #define TCHTF       28  // TCH Full rate
  #define TCHTH       29  // TCH Half rate
  #define BCCHN_TOP   30  // BCCH Neighbour TOP priority in Idle mode
#if ((REL99 == 1) && (FF_BHO == 1))
  #define FBSB        31  // Freq + Synchro Burst Reading in Blind Handover
  #define SYNCHRO     32  // synchro task: L1S reset
#else //#if ((REL99 == 1) && (FF_BHO == 1))
  #define SYNCHRO     31  // synchro task: L1S reset
#endif //#if ((REL99 == 1) && (FF_BHO == 1))
  //END_GSM_TASKS/

#else

#if ((REL99 == 1) && (FF_BHO == 1))
  #define NBR_DL_L1S_TASKS  46
#else //#if ((REL99 == 1) && (FF_BHO == 1))
  #define NBR_DL_L1S_TASKS  45
#endif //#if ((REL99 == 1) && (FF_BHO == 1))

#if (FF_REPEATED_SACCH == 1 )
  #define  REPEATED_SACCH_ENABLE  1
#endif /*  FF_REPEATED_SACCH */
  //GPRS_TASKS/
  #define HWTEST       0   // DSP checksum reading
  #define ADC_CSMODE0  1   // ADC task in CS_MODE0 mode
  #define DEDIC        2   // Global Dedicated mode switch
  #define RAACC        3   // Channel access (ul)
  #define RAHO         4   // Handover access (ul)
  #define NSYNC        5   // Global Neighbour cell synchro switch
  #define POLL         6   // Packet Polling (Access)
  #define PRACH        7   // Packet Random Access Channel
  #define ITMEAS       8   // Interference measurements
  #define FBNEW        9   // Frequency burst search (Idle mode)
  #define SBCONF       10  // Synchro. burst confirmation
  #define SB2          11  // Synchro. burst read (1 frame uncertainty / SB position)
  #define PTCCH        12  // Packet Timing Advance control channel
  #define FB26         13  // Frequency burst search, dedic/transfer mode MF26 or MF52
  #define SB26         14  // Synchro burst search, dedic/transfer mode MF26 or MF52
  #define SBCNF26      15  // Synchro burst confirmation, dedic/transfer mode MF26 or MF52
  #define FB51         16  // Frequency burst search, dedic mode MF51
  #define SB51         17  // Synchro burst search, dedic MF51
  #define SBCNF51      18  // Synchro burst confirmation, dedic MF51
  #define PDTCH        19  // Packet Data channel
  #define BCCHN        20  // BCCH Neighbor in GSM Idle
  #define ALLC         21  // All CCCH Reading
  #define EBCCHS       22  // Extended BCCH Serving Reading
  #define NBCCHS       23  // Normal BCCH Serving Reading
  #define ADL          24  // SACCH(SDCCH) DL
  #define AUL          25  // SACCH(SDCCH) UL
  #define DDL          26  // SDCCH DL
  #define DUL          27  // SDCCH UL
  #define TCHD         28  // Dummy for TCH Half rate
  #define TCHA         29  // SACCH(TCH)
  #define TCHTF        30  // TCH Full rate
  #define TCHTH        31  // TCH Half rate
  #define PALLC        32  // All PCCCH reading
  #define SMSCB        33  // CBCH serving Reading
  #define PBCCHS       34  // PBCCH serving reading
  #define PNP          35  // Packet Normal paging Reading
  #define PEP          36  // Packet Extended paging Reading
  #define SINGLE       37  // Single Block for GPRS
  #define PBCCHN_TRAN  38  // Packet BCCH Neighbor in Packet Transfer mode.
  #define PBCCHN_IDLE  39  // Packet BCCH Neighbor in Idle mode.
  #define BCCHN_TRAN   40  // BCCH Neighbour in Packet Transfer mode
  #define NP           41  // Normal paging Reading
  #define EP           42  // Extended paging Reading
  #define BCCHN_TOP    43  // BCCH Neighbour TOP priority in Idle mode
#if ((REL99 == 1) && (FF_BHO == 1))
  #define FBSB             44  // Freq + Synchro Burst Reading in Blind Handover
  #define SYNCHRO          45  // synchro task: L1S reset
#else //#if ((REL99 == 1) && (FF_BHO == 1))
  #define SYNCHRO      44  // synchro task: L1S reset
#endif //#if ((REL99 == 1) && (FF_BHO == 1))
  //END_GPRS_TASKS/

#endif

#if (GSM_IDLE_RAM != 0)
  #define SIZE_TAB_L1S_MONITOR (((NBR_DL_L1S_TASKS-1) >> 5) + 1)
#endif

//------------------------------------
// LAYER 1 API
//------------------------------------
#define MCSI_PORT1 0
#define MCSI_PORT2 1


#if (W_A_DSP_PR20037 == 1)
 //---------------------------------
 // DSP vocoder Enable/ Disable
 //---------------------------------
 #if (FF_L1_TCH_VOCODER_CONTROL == 1)
   #if (L1_VOCODER_IF_CHANGE == 0)
     #define TCH_VOCODER_DISABLE_REQ          0
     #define TCH_VOCODER_ENABLE_REQ           1
     #define TCH_VOCODER_ENABLED              2
     #define TCH_VOCODER_DISABLED             3
   #else
     #define TCH_VOCODER_RESET_COMMAND        0
     #define TCH_VOCODER_ENABLE_COMMAND       1
     #define TCH_VOCODER_DISABLE_COMMAND      2
   #endif // L1_VOCODER_IF_CHANGE == 0

   #if (W_A_WAIT_DSP_RESTART_AFTER_VOCODER_ENABLE ==1)
     // Number of TDMA wait frames until the DSP output is steady
     #define DSP_VOCODER_ON_TRANSITION      165
   #endif
 #endif // FF_L1_TCH_VOCODER_CONTROL
#endif // W_A_DSP_PR20037


//---------------------------------
// Handover Finished cause defines.
//---------------------------------
#define HO_COMPLETE              0
#define HO_TIMEOUT               1
#if ((REL99 == 1) && (FF_BHO == 1))
  #define HO_FB_FAIL             2
  #define HO_SB_FAIL             3

  #define NORMAL_HANDOVER        0
  #define BLIND_HANDOVER         1
#endif

//---------------------------------
// FB detection algorithm defines.
//---------------------------------
#define FB_MODE_0                0                          // FB detec. mode 0.
#define FB_MODE_1                1                          // FB detec. mode 1.

//---------------------------------
// SB acquisition phase.
//---------------------------------
#if ((REL99 == 1) && ((FF_BHO == 1) || (FF_RTD == 1)))
  #define SB_ACQUISITION_PHASE      5
#endif

//---------------------------------
// AFC control defines.
//---------------------------------
#define AFC_INIT                 1
#define AFC_OPEN_LOOP            2
#define AFC_CLOSED_LOOP          3

// For VCXO algo.
#if (VCXO_ALGO)
#define AFC_INIT_CENTER          4
#define AFC_INIT_MAX             5
#define AFC_INIT_MIN             6
#endif

#if 0
// For Locosto
#define L1_AFC_MANUAL_MODE  0
#define L1_AFC_SCRIPT_MODE  1
#define L1_AFC_NONE         2

#define L1_CTL_ZERO_IF 2
#define L1_CTL_LOW_IF 1

#define  L1_IL_INVALID 0
#define  L1_IL_VALID 1

// End Locosto
#endif

//---------------------------------
// TOA control defines.
//---------------------------------
#define TOA_INIT                 1
#define TOA_RUN                  2
#if (TOA_ALGO == 2)
  // In this version TOA is refreshed every 2 seconds
  #define   L1_TOA_UPDATE_TIME  ((UWORD32)(433))
#endif

//---------------------------------
// Neighbour Synchro possible status.
//---------------------------------
#define NSYNC_FREE               0
#define NSYNC_PENDING            1
#define NSYNC_COMPLETED          2
#if (L1_12NEIGH ==1)
  #define NSYNC_WAIT             3
#endif

/************************************/
/* Layer 1 constants declaration... */
/************************************/
#define MAX_FN           ((UWORD32)26*51*2048)

#if L1_GPRS
  #define MAX_BLOCK_ID   ((UWORD32) (3 * (UWORD32) (MAX_FN / 13))) // Block ID corresponding to fn = FN MAX
#endif

#if FF_L1_IT_DSP_DTX
  // dtx_status states
  #define DTX_AVAILABLE          0
  #define DTX_AWAITED            1
  #define DTX_IT_DSP             2

  // Latency time for Fast DTX availability upon channel start (TDMAs)
  #define FAST_DTX_LATENCY       10 //chaged from value-4 -CQ- 74387
#endif

//--------------------------------------------------------
// standard specific constants used in l1_config.std.xxx
//--------------------------------------------------------
#if (L1_FF_MULTIBAND == 0) 

// GSM
#define FIRST_ARFCN_GSM               1    // 1st arfcn is 1
#define NBMAX_CARRIER_GSM           124    // 124 for GSM, 174 for E_GSM, 374 for DCS1800.
#define MAX_TXPWR_GSM                19    // lowest power ctrl level value in GSM band
// GSM_E
#define FIRST_ARFCN_EGSM              1    // 1st arfcn is 1
#define NBMAX_CARRIER_EGSM          174    // 174 carriers for GSM_E.
#define MAX_TXPWR_EGSM               19    // lowest power ctrl level value in GSM-E band
// PCS1900
#define FIRST_ARFCN_PCS             512    // 1st arfcn is 512
#define NBMAX_CARRIER_PCS           299    // 299 carriers for PCS1900.
#define MAX_TXPWR_PCS                15    // lowest power ctrl level value in PCS band
#define TXPWR_TURNING_POINT_PCS      21
// DCS1800
#define FIRST_ARFCN_DCS             512    // 1st arfcn is 512
#define NBMAX_CARRIER_DCS           374    // 374 carriers for DCS1800.
#define MAX_TXPWR_DCS                15    // lowest power ctrl level value in DCS band
#define TXPWR_TURNING_POINT_DCS      28
// GSM850
#define FIRST_ARFCN_GSM850          128    // 1st arfcn is 128
#define NBMAX_CARRIER_GSM850        124    // 124 carriers for GSM850
#define NBMEAS_GSM850                 3    // 3 measurement per frame TBD
#define MAX_TXPWR_GSM850             19    // lowest power ctrl level value in GSM band
// DUAL
#define FIRST_DCS_INDEX_DUAL        125    // 1st DCS index within the 498 continu list
#define NBMAX_CARRIER_DUAL      124+374    // 374 carriers for DCS1800 + 124 carriers for GSM900 Band
#define TXPWR_TURNING_POINT_DUAL     28
// DUALEXT
#define FIRST_DCS_INDEX_DUALEXT     175    // 1st DCS index within the 548 continu list
#define NBMAX_CARRIER_DUALEXT   174+374    // 374 carriers for DCS1800 + 174 carriers for E-GSM900 Band
#define TXPWR_TURNING_POINT_DUALEXT  28
// DUAL_US
#define FIRST_ARFCN_GSM850_DUAL_US       1    // 1st GSM850 index within the 423 continu list
#define FIRST_PCS_INDEX_DUAL_US        125    // 1st PCS index within the 423 continu list
#define NBMAX_CARRIER_DUAL_US      124+299    // 299 carriers for PCS1900 + 124 carriers for GSM850\ Band
#define NBMEAS_DUAL_US                   4    // 4 measurements per frames.
#define TXPWR_TURNING_POINT_DUAL_US     28    // TBD


#define NBMAX_CARRIER    NBMAX_CARRIER_DUALEXT //used in arrays for power measurement
                                           //non optimized!!! (dynamic memory allocation to optimize)
#define BAND1    1
#define BAND2    2

#else // L1_FF_MULTIBAND == 1 below

/***** GSM Band Identifiers to be communicated to the L3, these indexes are fixed *****************/
#define PGSM900                       0
#define GSM850                        1
#define PCS1900                       2
#define DCS1800                       3   
#define GSM750                        4
#define GSM480                        5
#define GSM450                        6
#define T_GSM380                      7
#define T_GSM410                      8 
#define T_GSM900                      9 
#define EGSM900                      10 
#define RGSM900                      11

/***** PGSM900, EGSM900 and RGSM900 are seen a single band GSM900 **********************************/
#define GSM900                       12                    

/***** The total number of bands specified in the 3GPP Specs ***************************************/
#define NB_MAX_GSM_BANDS             12

#if 0               
/********************************* Physical_band_ids to be supported Definition *******************/
#define RGSM900_SUPPORTED           0
#define EGSM900_SUPPORTED           1
#define PGSM900_SUPPORTED           0
#define GSM850_SUPPORTED            1
#define PCS1900_SUPPORTED           1  
#define DCS1800_SUPPORTED           1 
#define GSM750_SUPPORTED            0
#define GSM710_SUPPORTED            0
#define GSM480_SUPPORTED            0
#define T_GSM380_SUPPORTED          0
#define T_GSM410_SUPPORTED          0
#define GSM450_SUPPORTED            0   
#define T_GSM900_SUPPORTED          0

/***** Bands to be supported Eror Cases ******************************************/

#if (RGSM900_SUPPORTED + EGSM900_SUPPORTED + PGSM900_SUPPORTED > 1)
#error " Only one of the RGSM900 or EGSM900 or PGSM900 bands is supported"
#endif/*if(RGSM900_SUPPORTED + EGSM900_SUPPORTED + PGSM900_SUPPORTED > 1)*/  


/***** GSM900_SUPPORTED means one of P, E or R GSM900 is supported ***/
#if ((PGSM900_SUPPORTED == 1) || (EGSM900_SUPPORTED == 1) || (RGSM900_SUPPORTED == 1))
#define GSM900_SUPPORTED 1
#endif 

#endif // if 0

/***** Number of Physical Bands Supported by the L1 Calculation, this constant is less than NB_MAX_GSM_BANDS**********/
#define NB_MAX_SUPPORTED_BANDS (GSM900_SUPPORTED +\
                                GSM850_SUPPORTED + \
                                PCS1900_SUPPORTED + \
                                DCS1800_SUPPORTED + \
                                GSM750_SUPPORTED + \
                                GSM480_SUPPORTED + \
                                GSM450_SUPPORTED + \
                                T_GSM410_SUPPORTED + \
                                T_GSM380_SUPPORTED + \
                                T_GSM900_SUPPORTED)
                                
/***** 
    EGSM and RGSM have two separate ranges of ARFCN's that are considered by L1 as 
    separate bands. Hence number of supported bands is one more if E or R GSM900 is
    supported. 
*****/
#if (PGSM900_SUPPORTED == 1)// This means E or R GSM900 is not supported
#define NB_MAX_EFFECTIVE_SUPPORTED_BANDS NB_MAX_SUPPORTED_BANDS
#endif

#if ((EGSM900_SUPPORTED == 1) || (RGSM900_SUPPORTED == 1))
#define NB_MAX_EFFECTIVE_SUPPORTED_BANDS (NB_MAX_SUPPORTED_BANDS + 1)
#endif

#if 0
/*The following constants allows the indexing of the physical bands in the MULTIBAND rf table located in l1_cust.c*/
/*The bands positionning order is related to the bands ENUMERATION here below*/
/*Changing the bands positions in this table implies changing the the band ENUMERATION in the file l1_const.h*/
/*Changing the the band ENUMERATION in the file l1_const.h implies changing the bands positions in the table below*/
enum
{
#if (GSM900_SUPPORTED == 1)
  GSM900_ID,
#endif /*if (GSM900_SUPPORTED == 1)*/

#if (GSM850_SUPPORTED == 1)
  GSM850_ID,
#endif /*if (GSM850_SUPPORTED == 1)*/

#if (DCS1800_SUPPORTED == 1)
  DCS1800_ID,
#endif /*if (DCS1800_SUPPORTED == 1)*/

#if (PCS1900_SUPPORTED == 1)
  PCS1900_ID,
#endif /*if (PCS1900_SUPPORTED == 1)*/

#if (GSM750_SUPPORTED == 1)
  GSM750_ID,
#endif /*if (GSM750_SUPPORTED == 1)*/

#if (GSM480_SUPPORTED == 1)
  GSM480_ID,
#endif /*if (GSM480_SUPPORTED == 1)*/

#if GSM450_SUPPORTED
  GSM450_ID,
#endif /*if (GSM450_SUPPORTED == 1)*/

#if (T_GSM410_SUPPORTED == 1)
  T_GSM410_ID,
#endif /*if (T_GSM410_SUPPORTED == 1)*/

#if (T_GSM380_SUPPORTED == 1)
  T_GSM380_ID,
#endif /*if (T_GSM380_SUPPORTED == 1)*/

#if (T_GSM900_SUPPORTED == 1)
  T_GSM900_ID,
#endif /*if (T_GSM900_SUPPORTED == 1)*/
};
#endif
/***********************************Calculation of the number of carriers per Effective Band*********/
#if 0

#if (PGSM900_SUPPORTED == 1)
#define NB_CARRIER_900_LOW_SUB_BAND 124
#define NB_CARRIER_900_HIGH_SUB_BAND 0
#endif /*if (PGSM900_SUPPORTED == 1)*/

#if (EGSM900_SUPPORTED == 1) 
#define NB_CARRIER_900_LOW_SUB_BAND 125
#define NB_CARRIER_900_HIGH_SUB_BAND 49
#endif /*if (EGSM900_SUPPORTED == 1)*/

#if (RGSM900_SUPPORTED == 1) 
#define NB_CARRIER_900_LOW_SUB_BAND 125
#define NB_CARRIER_900_HIGH_SUB_BAND 69
#endif /*if (RGSM900_SUPPORTED == 1)*/

#define NB_CARRIER_850 124
#define NB_CARRIER_1800 344
#define NB_CARRIER_1900 299
#define NB_CARRIER_750 74
#define NB_CARRIER_480 35
#define NB_CARRIER_450 35
#define NB_CARRIER_T_410 47
#define NB_CARRIER_T_380 47
#define NB_CARRIER_T_900 27

/****** NBMAX_CARRIER is the total number of carriers supported based on band support *********/

#define NBMAX_CARRIER  (((NB_CARRIER_900_LOW_SUB_BAND + NB_CARRIER_900_HIGH_SUB_BAND)  * GSM900_SUPPORTED) \
                       + (NB_CARRIER_850 * GSM850_SUPPORTED) \
                       + (NB_CARRIER_1800 * DCS1800_SUPPORTED)\
                       + (NB_CARRIER_1900 * PCS1900_SUPPORTED) \
                       + (NB_CARRIER_750 * GSM750_SUPPORTED) \
                       + (NB_CARRIER_480 * GSM480_SUPPORTED) \
                       + (NB_CARRIER_450 * GSM450_SUPPORTED) \
                       + (NB_CARRIER_T_410 * T_GSM410_SUPPORTED) \
                       + (NB_CARRIER_T_380 * T_GSM380_SUPPORTED) \
                       + (NB_CARRIER_T_900 * T_GSM900_SUPPORTED))


/**
    The multiband frequency numbers exchanged across L3-L1 I/F are the 3GPP ARFCN numbers
    with exceptiopn of 1900 where the numbers start from 1024 onwards. This results in 
    holes in the numbering given from L3 and hence cannot be used for indexing arrays of 
    carriers. To index arrays the frequency numbers from L3 are translated to 'operative radio
    frequencies'. For any band configuration supported, this is a continuos number from 
    0 to NBMAX_CARRIER (The sum of number of carriers in all supported bands)
    The defines below are for finding the first operative frequency corresponding to each band
**/

#define FIRST_OPERATIVE_RADIO_FREQ_900_LOW_SUB_BAND     0
#define FIRST_OPERATIVE_RADIO_FREQ_900_HIGH_SUB_BAND    (FIRST_OPERATIVE_RADIO_FREQ_900_LOW_SUB_BAND  + NB_CARRIER_900_LOW_SUB_BAND) * GSM900_SUPPORTED
#define FIRST_OPERATIVE_RADIO_FREQ_850                  (FIRST_OPERATIVE_RADIO_FREQ_900_HIGH_SUB_BAND + NB_CARRIER_900_HIGH_SUB_BAND) * GSM850_SUPPORTED
#define FIRST_OPERATIVE_RADIO_FREQ_1900                 (FIRST_OPERATIVE_RADIO_FREQ_850 + NB_CARRIER_850) * PCS1900_SUPPORTED
#define FIRST_OPERATIVE_RADIO_FREQ_1800                 (FIRST_OPERATIVE_RADIO_FREQ_1900 + NB_CARRIER_1900) * DCS1800_SUPPORTED
#define FIRST_OPERATIVE_RADIO_FREQ_750                  (FIRST_OPERATIVE_RADIO_FREQ_1800 + NB_CARRIER_1800) * GSM750_SUPPORTED
#define FIRST_OPERATIVE_RADIO_FREQ_480                  (FIRST_OPERATIVE_RADIO_FREQ_750 + NB_CARRIER_750) * GSM480_SUPPORTED
#define FIRST_OPERATIVE_RADIO_FREQ_450                  (FIRST_OPERATIVE_RADIO_FREQ_480 + NB_CARRIER_480) * GSM450_SUPPORTED
#define FIRST_OPERATIVE_RADIO_FREQ_T_410                (FIRST_OPERATIVE_RADIO_FREQ_450 + NB_CARRIER_450) * T_GSM410_SUPPORTED
#define FIRST_OPERATIVE_RADIO_FREQ_T_380                (FIRST_OPERATIVE_RADIO_FREQ_T_410 + NB_CARRIER_T_410) * T_GSM380_SUPPORTED    
#define FIRST_OPERATIVE_RADIO_FREQ_T_900                (FIRST_OPERATIVE_RADIO_FREQ_T_380 + NB_CARRIER_T_380) * T_GSM900_SUPPORTED
   
/********************** Definition of the first  radio freqs as per L3-L1 interface *********/

#if (PGSM900_SUPPORTED == 1)
#define FIRST_RADIO_FREQ_900_LOW_SUB_BAND 1
#define FIRST_RADIO_FREQ_900_HIGH_SUB_BAND 0
#endif /*if (PGSM900_SUPPORTED == 1)*/

#if (EGSM900_SUPPORTED == 1)
#define FIRST_RADIO_FREQ_900_LOW_SUB_BAND 0
#define FIRST_RADIO_FREQ_900_HIGH_SUB_BAND 975
#endif /*if (EGSM900_SUPPORTED == 1)*/

#if (RGSM900_SUPPORTED == 1)
#define FIRST_RADIO_FREQ_900_LOW_SUB_BAND 0
#define FIRST_RADIO_FREQ_900_HIGH_SUB_BAND 955
#endif /* (RGSM900_SUPPORTED == 1)*/

#define FIRST_RADIO_FREQ_850      128    
#define FIRST_RADIO_FREQ_1800     512
#define FIRST_RADIO_FREQ_1900     1024
#define FIRST_TPU_RADIO_FREQ_1900 512  /* TBD The GSM1900 is the unique band in which the FIRST_TPU_RADIO is not equal to FIRST_RADIO_FREQ*/

#endif // if 0                       

#endif // L1_FF_MULTIBAND == 0

#if (L1_FF_MULTIBAND == 0)
#else
/* Prototypes */

#define l1_multiband_radio_freq_convert_into_effective_band_id(radio_freq) \
 rf_convert_rffreq_to_l1subband(radio_freq)

#define l1_multiband_radio_freq_convert_into_physical_band_id(radio_freq) \
((UWORD8)rf_convert_l1freq_to_rf_band_idx(rf_convert_rffreq_to_l1freq(radio_freq)))

#define l1_multiband_radio_freq_convert_into_operative_radio_freq(radio_freq) \
  rf_convert_rffreq_to_l1freq(radio_freq)

#if (CODE_VERSION != SIMULATION)
UWORD8 rf_convert_rffreq_to_l1subband(UWORD16 rf_freq);
UWORD8 rf_convert_l1freq_to_l1subband(UWORD16 l1_freq);
WORD8 rf_convert_l1freq_to_rf_band_idx(UWORD16 l1_freq);
UWORD16 rf_convert_l1freq_to_rffreq(UWORD16 l1_freq );
UWORD16 rf_convert_l1freq_to_rffreq_rfband(UWORD16 l1_freq, WORD8 *rf_band_index);
UWORD16 rf_convert_l1freq_to_arfcn_rfband(UWORD16 l1_freq, WORD8 *rf_band_index);
UWORD16 rf_convert_rffreq_to_l1freq(UWORD16 rf_freq);
UWORD16 rf_convert_rffreq_to_l1freq_rfband(UWORD16 rf_freq, WORD8 *rf_band_index);
UWORD16 rf_convert_tmarfcn_to_l1freq(UWORD16 tm_arfcn, WORD8 * error_flag);
#endif

/* RF defines */
/******************************Physical_band_ids to be supported Definition****************************************/
#define RGSM900_SUPPORTED  0
#define PGSM900_SUPPORTED  0
#define GSM750_SUPPORTED   0
#define GSM710_SUPPORTED   0
#define GSM480_SUPPORTED   0
#define T_GSM380_SUPPORTED 0
#define T_GSM410_SUPPORTED 0
#define GSM450_SUPPORTED   0
#define T_GSM900_SUPPORTED 0
#if 0
#if (RF_BAND_SYSTEM_INDEX == RF_DCS1800_850_DUALBAND)
#define GSM900_SUPPORTED  0
#define GSM850_SUPPORTED   1
#define PCS1900_SUPPORTED  0
#define DCS1800_SUPPORTED  1
#elif (RF_BAND_SYSTEM_INDEX == RF_PCS1900_900_DUALBAND)
#define GSM900_SUPPORTED  1
#define GSM850_SUPPORTED   0
#define PCS1900_SUPPORTED  1
#define DCS1800_SUPPORTED  0
#elif (RF_BAND_SYSTEM_INDEX == RF_US_DUALBAND)
#define GSM900_SUPPORTED  0
#define GSM850_SUPPORTED   1
#define PCS1900_SUPPORTED  1
#define DCS1800_SUPPORTED  0
#elif (RF_BAND_SYSTEM_INDEX == RF_US_TRIBAND)
#define GSM900_SUPPORTED  0
#define GSM850_SUPPORTED   1
#define PCS1900_SUPPORTED  1
#define DCS1800_SUPPORTED  1
#elif (RF_BAND_SYSTEM_INDEX == RF_EU_DUALBAND)
#define GSM900_SUPPORTED  1
#define GSM850_SUPPORTED   0
#define PCS1900_SUPPORTED  0
#define DCS1800_SUPPORTED  1
#elif (RF_BAND_SYSTEM_INDEX == RF_EU_TRIBAND)
#define GSM900_SUPPORTED  1
#define GSM850_SUPPORTED   0
#define PCS1900_SUPPORTED  1
#define DCS1800_SUPPORTED  1
#elif (RF_BAND_SYSTEM_INDEX == RF_QUADBAND)
#define GSM900_SUPPORTED  1
#define GSM850_SUPPORTED   1
#define PCS1900_SUPPORTED  1
#define DCS1800_SUPPORTED  1
#endif
#endif // if 0 TBD
#define GSM900_SUPPORTED  1
#define GSM850_SUPPORTED   1
#define PCS1900_SUPPORTED  1
#define DCS1800_SUPPORTED  1

/* The physical RF bands are enumerated in order of increasing frequencies */
/* The same order must be used in l1_rf61, l1_cust, and l1_const */
enum
{
#if (GSM900_SUPPORTED == 1)
  RF_GSM900,
#endif
#if (GSM850_SUPPORTED == 1)
  RF_GSM850,
#endif
#if (DCS1800_SUPPORTED == 1)
  RF_DCS1800,
#endif
#if (PCS1900_SUPPORTED == 1)
  RF_PCS1900,
#endif
  RF_NB_SUPPORTED_BANDS /* The number of supported physical bands */
};

#if GSM900_SUPPORTED
#define RF_NB_SUBBANDS (RF_NB_SUPPORTED_BANDS + 1)
#else
#define RF_NB_SUBBANDS (RF_NB_SUPPORTED_BANDS)
#endif

/***********************************Calculation of the number of carriers per Effective Band*********/
#define NB_CHAN_900L  125
#define NB_CHAN_900H  49
#define NB_CHAN_850   124
#define NB_CHAN_1800  374
#define NB_CHAN_1900  299

/**
    The multiband frequency numbers exchanged across L3-L1 I/F are the 3GPP ARFCN numbers
    except for DCS1900 where the numbers start from 1024 onwards, i.e. ARFCN+512.
    L1 cannot have holes in the numbering, so a different L1 internal one is needed to build arrays in L1.
    This numbering is similar to ARFCN numbering, except the high part of GSM900 channel numbers
    are mapped between low part of GSM900 numbers and the GSM850 numbers.
    For any band configuration supported, this is a continuos number from
    0 to NB_CARRIERS (The sum of number of carriers in all supported bands)
**/
/****** L1_NB_CARRIER is the total number of carriers supported based on band support *********/
#define L1_FREQ_1ST_900L    0
#define L1_FREQ_1ST_900H   (L1_FREQ_1ST_900L + NB_CHAN_900L * GSM900_SUPPORTED)
#define L1_FREQ_1ST_850    (L1_FREQ_1ST_900H + NB_CHAN_900H * GSM900_SUPPORTED)
#define L1_FREQ_1ST_1800   (L1_FREQ_1ST_850  + NB_CHAN_850  * GSM850_SUPPORTED)
#define L1_FREQ_1ST_1900   (L1_FREQ_1ST_1800 + NB_CHAN_1800 * DCS1800_SUPPORTED)
#define NBMAX_CARRIER      (L1_FREQ_1ST_1900 + NB_CHAN_1900 * PCS1900_SUPPORTED)

#define ARFCN_1ST_900L  0
#define ARFCN_1ST_900H  975
#define ARFCN_1ST_850   128
#define ARFCN_1ST_1800  512
#define ARFCN_1ST_1900  512

#define RF_FREQ_1ST_900L  ARFCN_1ST_900L
#define RF_FREQ_1ST_900H  ARFCN_1ST_900H
#define RF_FREQ_1ST_850   ARFCN_1ST_850
#define RF_FREQ_1ST_1800  ARFCN_1ST_1800
#define RF_FREQ_1ST_1900  (ARFCN_1ST_1900 + 512)


typedef struct
{
  UWORD16 first_rf_freq;
  UWORD16 last_rf_freq;
  UWORD16 first_l1_freq;
  WORD16  l1freq2rffreq;
}
T_MULTIBAND_CONVERT;

typedef struct
{
  UWORD8 power_class;
  UWORD8  tx_turning_point;
  UWORD8  max_txpwr;
  UWORD8  gsm_band_identifier;
  char*   name;
}
T_MULTIBAND_RF;

#endif /*if (L1_FF_MULTIBAND == 1)*/



#define NO_TXPWR 255     // sentinal value used with UWORD8 type.


//--------------------------------------------------------
// Receive level values.
//--------------------------------------------------------
#define RXLEV63   63   // max value for RXLEV.
#define IL_MIN    240  // minimum input level is -120 dbm.

/*--------------------------------------------------------*/
/* Max value for GSM Paging Parameters.                   */
/*--------------------------------------------------------*/
#define MAX_AG_BLKS_RES_NCOMB   7
#define MAX_AG_BLKS_RES_COMB    2
#define MAX_PG_BLOC_INDEX_NCOMB 8
#define MAX_PG_BLOC_INDEX_COMB  2
#define MAX_BS_PA_MFRMS         9

/*--------------------------------------------------------*/
/* Position of different blocs in a MF51.                 */
/*--------------------------------------------------------*/
#define NBCCH_POSITION     2   // Normal BCCH position in a MF51.
#define EBCCH_POSITION     6   // Extended BCCH position in a MF51.
#define CCCH_0             6
#define CCCH_1            12
#define CCCH_2            16
#define CCCH_3            22
#define CCCH_4            26
#define CCCH_5            32
#define CCCH_6            36
#define CCCH_7            42
#define CCCH_8            46
#define FB_0               0
#define FB_1              10
#define FB_2              20
#define FB_3              30
#define FB_4              40
#define SB_0               1
#define SB_1              11
#define SB_2              21
#define SB_3              31
#define SB_4              41

/*--------------------------------------------------------*/
/* System information position in the "si_bit_map".       */
/*--------------------------------------------------------*/
#define SI_1              0x0001
#define SI_2              0x0002
#define SI_2BIS           0x0100
#define SI_2TER           0x0200
#define SI_3              0x0004
#define SI_4              0x0008
#define SI_7              0x0040
#define SI_8              0x0080
#define ALL_SI            SI_1 | SI_2 | SI_2BIS | SI_2TER | SI_3 | SI_4 | SI_7 | SI_8

/*--------------------------------------------------------*/
/* CBCH position in the "smscb_bit_map".                  */
/*--------------------------------------------------------*/
#define CBCH_TB1            0x0001
#define CBCH_TB2            0x0002
#define CBCH_TB3            0x0004
#define CBCH_TB5            0x0008
#define CBCH_TB6            0x0010
#define CBCH_TB7            0x0020

#if FF_TBF
/*--------------------------------------------------------*/
/* Access burst types on the RACH/PRACH                   */
/*--------------------------------------------------------*/
  #define ACC_BURST_8              0
  #define ACC_BURST_11             1
  #define ACC_BURST_11_TS1         2
  #define ACC_BURST_11_TS2         3
#endif
#define CBCH_CONTINUOUS_READING  0
#define CBCH_SCHEDULED           1
#define CBCH_INACTIVE            2

/*--------------------------------------------------------*/
/* Channel type definitions for DEDICATED mode.           */
/*--------------------------------------------------------*/

//TABLE/ CHAN TYPE
#define INVALID_CHANNEL    0
#define TCH_F              1
#define TCH_H              2
#define SDCCH_4            3
#define SDCCH_8            4
//END_TABLE/

/*--------------------------------------------------------*/
/* Channel mode definitions for DEDICATED.                */
/*--------------------------------------------------------*/
#define SIG_ONLY_MODE      0    // signalling only
#define TCH_FS_MODE        1    // speech full rate
#define TCH_HS_MODE        2    // speech half rate
#define TCH_96_MODE        3    // data 9,6 kb/s
#define TCH_48F_MODE       4    // data 4,8 kb/s full rate
#define TCH_48H_MODE       5    // data 4,8 kb/s half rate
#define TCH_24F_MODE       6    // data 2,4 kb/s full rate
#define TCH_24H_MODE       7    // data 2,4 kb/s half rate
#define TCH_EFR_MODE       8    // enhanced full rate
#define TCH_144_MODE       9    // data 14,4 kb/s half rate
#if (AMR == 1)
  #define TCH_AHS_MODE      10    // adaptative speech half rate
  #define TCH_AFS_MODE      11    // adaptative speech full rate
#endif


/*--------------------------------------------------------*/
/* Layer 1 functional modes for "mode" setting pupose.    */
/*--------------------------------------------------------*/
#define CS_MODE0           0    // functional mode at reset.
#define CS_MODE            1    // functional mode in CELL SELECTION.
#define I_MODE             2    // functional mode in IDLE.
#define CON_EST_MODE1      3    // functional mode in ACCESS (before 1st RA, for TOA convergency).
#define CON_EST_MODE2      4    // functional mode in ACCESS (after 1st RA).
#define DEDIC_MODE         5    // functional mode in DEDICATED.
#define DEDIC_MODE_HALF_DATA 6    // used only for TOA histogram length purpose.
#if L1_GPRS
  #define PACKET_TRANSFER_MODE 7 //
#endif

/*--------------------------------------------------------*/
/* Error causes for MPHC_NO_BCCH message.                 */
/*--------------------------------------------------------*/
#define NO_FB_SB           0  // FB or SB not found.
#define NCC_NOT_PERMITTED  1  // Synchro OK! but PLMN not permitted.

/*--------------------------------------------------------*/
/* MFTAB constants and flags.                             */
/*--------------------------------------------------------*/
#define L1_MAX_FCT        5        /* Max number of fctions in a frame */
#define MFTAB_SIZE       20

/********************************/
/* Software register/flags      */
/* definitions.                 */
/********************************/
#define NO_CTRL       (TRUE_L << 0)
#define CTRL_MS       (TRUE_L << 1)
#define CTRL_TX       (TRUE_L << 2)
#define CTRL_RX       (TRUE_L << 3)
#define CTRL_ADC      (TRUE_L << 4)
#define CTRL_SYNC     (TRUE_L << 5)
#define CTRL_ABORT    (TRUE_L << 6)
#define CTRL_TEST     (TRUE_L << 7)
#define CTRL_SYCB     (TRUE_L << 8)
#define CTRL_FB_ABORT (TRUE_L << 9)
#if L1_GPRS
  #define CTRL_PRACH     (TRUE_L << 10)
  #define CTRL_SYSINGLE  (TRUE_L << 11)
#endif
#if ((REL99 == 1) && (FF_BHO == 1))
#define CTRL_FBSB_ABORT (TRUE_L << 12)
#endif

/********************************/
/* MISC management              */
/********************************/
#define GSM_CTL           0   // DSP ctrl for a GSM task
#define MISC_CTL          1   // DSP ctrl for a MISC task
#define GSM_MISC_CTL      2   // DSP ctrl for a GSM and MISC tasks

/********************************/
/* TOA management               */
/********************************/
#define  ISH_INVALID    128          // value used to disable the toa offset

/********************************/
/* AGC management               */
/********************************/
#define DPAGC_FIFO_LEN    4
#define DPAGC_MAX_FLAG    1
#if (AMR == 1)
  #define DPAGC_AMR_FIFO_LEN 4
#endif

/********************************/
/* ADC management               */
/********************************/
#define ADC_DISABLED                  0x0000
  // Traffic part
#define ADC_MASK_RESET_TRAFFIC        0xFF00
#define ADC_NEXT_TRAFFIC_UL           0x0001
#define ADC_EACH_TRAFFIC_UL           0x0002
#define ADC_NEXT_TRAFFIC_DL           0x0004
#define ADC_EACH_TRAFFIC_DL           0x0008
#define ADC_EACH_RACH                 0x0010


  // Idle part
#define ADC_MASK_RESET_IDLE           0x00FF
#define ADC_NEXT_NORM_PAGING          0x0100
#define ADC_EACH_NORM_PAGING          0x0200
#define ADC_NEXT_MEAS_SESSION         0x0400
#define ADC_EACH_MEAS_SESSION         0x0800
#define ADC_NEXT_NORM_PAGING_REORG    0x1000
#define ADC_EACH_NORM_PAGING_REORG    0x2000


  // CS_MODE0 part
#define ADC_NEXT_CS_MODE0             0x4000
#define ADC_EACH_CS_MODE0             0x8000


/********************************/
/*   Neighbor BCCH priorities   */
/********************************/

#define TOP_PRIORITY     0
#define HIGH_PRIORITY    1
#define NORMAL_PRIORITY  2

/********************************/
/* Driver constants definitions */
/********************************/

// Used to identify the 1st and last burst for offset management in Drivers.
#define BURST_1           0
#define BURST_2           1
#define BURST_3           2
#define BURST_4           3


// Identifier for all DSP tasks.
// ...RX & TX tasks identifiers.
#define NO_DSP_TASK        0  // No task.
#define NP_DSP_TASK       21  // Normal Paging reading task.
#define EP_DSP_TASK       22  // Extended Paging reading task.
#define NBS_DSP_TASK      19  // Normal BCCH serving reading task.
#define EBS_DSP_TASK      20  // Extended BCCH serving reading task.
#define NBN_DSP_TASK      17  // Normal BCCH neighbour reading task.
#define EBN_DSP_TASK      18  // Extended BCCH neighbour reading task.
#define ALLC_DSP_TASK     24  // CCCH reading task while performing FULL BCCH/CCCH reading task.
#define CB_DSP_TASK       25  // CBCH reading task.
#define DDL_DSP_TASK      26  // SDCCH/D (data) reading task.
#define ADL_DSP_TASK      27  // SDCCH/A (SACCH) reading task.
#define DUL_DSP_TASK      12  // SDCCH/D (data) transmit task.
#define AUL_DSP_TASK      11  // SDCCH/A (SACCH) transmit task.
#define RACH_DSP_TASK     10  // RACH transmit task.
#define TCHT_DSP_TASK     13  // TCH Traffic data DSP task id (RX or TX)
#define TCHA_DSP_TASK     14  // TCH SACCH   data DSP task id (RX or TX)
#define TCHD_DSP_TASK     28  // TCH Traffic data DSP task id (RX or TX)

#define TCH_DTX_UL        15  // Replace UL task in DSP->MCU com. to say "burst not transmitted".

#if (L1_GPRS)
  // Identifier for DSP tasks Packet dedicated.
  // ...RX & TX tasks identifiers.
  //------------------------------------------------------------------------
  // WARNING ... Need to aligned following macro with MCU/DSP GPRS Interface
  //------------------------------------------------------------------------
  #define PNP_DSP_TASK      30
  #define PEP_DSP_TASK      31
  #define PALLC_DSP_TASK    32
  #define PBS_DSP_TASK      33

  #define PTCCH_DSP_TASK    33

#endif

// Identifier for measurement, FB / SB search tasks.
// Values 1,2,3 reserved for "number of measurements".
#define FB_DSP_TASK        5  // Freq. Burst reading task in Idle mode.
#define SB_DSP_TASK        6  // Sync. Burst reading task in Idle mode.
#define TCH_FB_DSP_TASK    8  // Freq. Burst reading task in Dedicated mode.
#define TCH_SB_DSP_TASK    9  // Sync. Burst reading task in Dedicated mode.
#if ((REL99 == 1) && (FF_BHO == 1))
#define FBSB_DSP_TASK     16  // Freq.+Sync. Burst reading task in Blind Handover.
#endif
#define IDLE1              1

// Debug tasks
#define CHECKSUM_DSP_TASK 33
#define TST_NDB           35  //  Checksum DSP->MCU
#define TST_DB            36  //  DB communication check
#define INIT_VEGA         37
#define DSP_LOOP_C        38

// Identifier for measurement, FB / SB search tasks.
// Values 1,2,3 reserved for "number of measurements".
#define TCH_LOOP_A        31
#define TCH_LOOP_B        32

#if (DSP >= 33)
  #define SC_CHKSUM_VER     (DB_W_PAGE_0 + (2 * (0x08DB - 0x800)))
#else
  #define SC_CHKSUM_VER     (DB_W_PAGE_0 + (2 * (0x09A0 - 0x800)))
#endif

// bits in d_gsm_bgd_mgt - background task management
#define B_DSPBGD_RECO           1       // start of reco in dsp background
#define B_DSPBGD_UPD            2       // start of alignement update in dsp background
#define B_DSPBGD_STOP_RECO      256     // stop of reco in dsp background
#define B_DSPBGD_STOP_UPD       512     // stop of alignement update in dsp background

// bit in d_pll_config
#define B_32KHZ_CALIB      (TRUE_L << 14) // force DSP in Idle1 during 32 khz calibration
// ****************************************************************
// NDB AREA (PARAM) MCU<->DSP COMMUNICATION DEFINITIONS
// ****************************************************************
// bits in d_tch_mode
#define B_EOTD            (TRUE_L << 0) // EOTD mode
#define B_PLAY_UL         (TRUE_L << 3) // Play UL
#define B_DCO_ON          (TRUE_L << 4) // DCO ON/OFF
#define B_AUDIO_ASYNC     (TRUE_L << 1) // WCP reserved

// ****************************************************************
// PARAMETER AREA (PARAM) MCU<->DSP COMMUNICATION DEFINITIONS
// ****************************************************************
#define C_POND_RED              1L
// below values are defined in the file l1_time.h
//#define D_NSUBB_IDLE            296L
//#define D_NSUBB_DEDIC           30L
#define D_FB_THR_DET_IACQ       0x3333L
#define D_FB_THR_DET_TRACK      0x28f6L

#if (RF_FAM == 60)
// UPPCosto without dc offset compensation (DSP algo)
  #define D_DC_OFF_THRES          0x0000L
#else
#define D_DC_OFF_THRES          0x7fffL
#endif

#define D_DUMMY_THRES           17408L
#define D_DEM_POND_GEWL         26624L
#define D_DEM_POND_RED          20152L
#define D_HOLE                  0L
#define D_TRANSFER_RATE         0x6666L

// Full Rate vocoder definitions.
#define D_MACCTHRESH1           7872L
#define D_MLDT                  -4L
#define D_MACCTHRESH            7872L
#define D_GU                    5772L
#define D_GO                    7872L
#define D_ATTMAX                53L
#define D_SM                    -892L
#define D_B                     208L
#define D_SD_MIN_THR_TCHFS      15L                   //(24L   *C_POND_RED)
#define D_MA_MIN_THR_TCHFS      738L                  //(1200L *C_POND_RED)
#define D_MD_MAX_THR_TCHFS      1700L                 //(2000L *C_POND_RED)
#define D_MD1_MAX_THR_TCHFS     99L                   //(160L  *C_POND_RED)

#if (DSP >= 33)
  // Frequency burst definitions
  #define D_FB_MARGIN_BEG         24
  #define D_FB_MARGIN_END         22

  // V42bis definitions
  #define D_V42B_SWITCH_HYST      16L
  #define D_V42B_SWITCH_MIN       64L
  #define D_V42B_SWITCH_MAX       250L
  #define D_V42B_RESET_DELAY      10L

  // Latencies definitions
  #if (DSP >= 33)
    // C.f. BUG1404
    #define D_LAT_MCU_BRIDGE        0x000FL
  #else
  #define D_LAT_MCU_BRIDGE        0x0009L
  #endif

  #define D_LAT_MCU_HOM2SAM       0x000CL

  #define D_LAT_MCU_BEF_FAST_ACCESS 0x0005L
  #define D_LAT_DSP_AFTER_SAM     0x0004L

  // Background Task in GSM mode: Initialization.
  #define D_GSM_BGD_MGT           0L

#if (CHIPSET == 4)
  #define D_MISC_CONFIG           0L
#elif (CHIPSET == 7)  || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) || (CHIPSET == 15)
  // This variable is basically used for Samson. If SAMSON should be zero.
  // A variable for making DSP not go to IDLE3 when DMA is on
  #define D_MISC_CONFIG           1L
#else
  #define D_MISC_CONFIG           0L
#endif

#endif

// Hall Rate vocoder and ched definitions.

#define D_SD_MIN_THR_TCHHS      37L
#define D_MA_MIN_THR_TCHHS      344L
#define D_MD_MAX_THR_TCHHS      2175L
#define D_MD1_MAX_THR_TCHHS     138L
#define D_SD_AV_THR_TCHHS       1845L
#define D_WED_FIL_TC            0x7c00L
#define D_WED_FIL_INI           4650L
#define D_X_MIN                 15L
#define D_X_MAX                 23L
#define D_Y_MIN                 703L
#define D_Y_MAX                 2460L
#define D_SLOPE                 135L
#define D_WED_DIFF_THRESHOLD    406L
#define D_MABFI_MIN_THR_TCHHS   5320L
#define D_LDT_HR                -5
#define D_MACCTRESH_HR          6500
#define D_MACCTRESH1_HR         6500
#define D_GU_HR                 2620
#define D_GO_HR                 3700
#define D_B_HR                  182
#define D_SM_HR                 -1608
#define D_ATTMAX_HR             53

// Enhanced Full Rate vocoder and ched definitions.

#define C_MLDT_EFR              -4
#define C_MACCTHRESH_EFR        8000
#define C_MACCTHRESH1_EFR       8000
#define C_GU_EFR                4522
#define C_GO_EFR                6500
#define C_B_EFR                 174
#define C_SM_EFR                -878
#define C_ATTMAX_EFR            53
#define D_SD_MIN_THR_TCHEFS     15L                   //(24L   *C_POND_RED)
#define D_MA_MIN_THR_TCHEFS     738L                  //(1200L *C_POND_RED)
#define D_MD_MAX_THR_TCHEFS     1230L                 //(2000L *C_POND_RED)
#define D_MD1_MAX_THR_TCHEFS    99L                   //(160L  *C_POND_RED)


// Integrated Data Services definitions.
#define D_MAX_OVSPD_UL          8
// Detect frames containing 90% of 1s as synchro frames
#define D_SYNC_THRES            0x3f50
// IDLE frames are only frames with 100 % of 1s
#define D_IDLE_THRES            0x4000
#define D_M1_THRES              5
#define D_MAX_OVSP_DL           8

// d_ra_act: bit field definition
#define B_F48BLK                5
#if REL99
#if FF_EMR
#define B_F48BLK_DL             6
#endif
#endif


// Mask for b_itc information (d_ra_conf)
#define CE_MASK                 0x04

#define D_FACCH_THR             0
#define D_DSP_TEST              0
#define D_VERSION_NUMBER        0
#define D_TI_VERSION            0


/*----------------------------------------------------------------------------*/
/*                                                                            */
/*                 DEFINITIONS FOR DSP <-> MCU COMMUNICATION.                 */
/*                 ++++++++++++++++++++++++++++++++++++++++++                 */
/*                                                                            */
/*----------------------------------------------------------------------------*/
// COMMUNICATION Interrupt definition
//------------------------------------
#define ALL_16BIT          0xffffL
#define B_GSM_PAGE         (TRUE_L << 0)
#define B_GSM_TASK         (TRUE_L << 1)
#define B_MISC_PAGE        (TRUE_L << 2)
#define B_MISC_TASK        (TRUE_L << 3)

#define B_GSM_PAGE_MASK    (ALL_16BIT ^ B_GSM_PAGE)
#define B_GSM_TASK_MASK    (ALL_16BIT ^ B_GSM_TASK)
#define B_MISC_PAGE_MASK   (ALL_16BIT ^ B_MISC_PAGE)
#define B_MISC_TASK_MASK   (ALL_16BIT ^ B_MISC_TASK)

// Common definition
//----------------------------------
// Index to *_DEMOD* arrays.
#define D_TOA                    0  // Time Of Arrival.
#define D_PM                     1  // Power Measurement.
#define D_ANGLE                  2  // Angle (AFC correction)
#define D_SNR                    3  // Signal / Noise Ratio.

#if REL99
#if FF_EMR
  #define D_CV_BEP                 2
  #define D_MEAN_BEP_MSW           0
  #define D_MEAN_BEP_LSW           1
#endif
#endif //L1_R99

// Bit name/position definitions.
#define B_JOINT                  4  // Chase combining flag
#define B_FIRE0                  5  // Fire result bit 0. (00 -> NO ERROR) (01 -> ERROR CORRECTED)
#define B_FIRE1                  6  // Fire result bit 1. (10 -> ERROR)    (11 -> unused)
#define B_SCH_CRC                8  // CRC result for SB decoding. (1 for ERROR).
#define B_BLUD                  15  // Uplink,Downlink data block Present. (1 for PRESENT).
#define B_AF                    14  // Activity bit: 1 if data block is valid.
#define B_BFI                    2  // Bad Frame Indicator
#define B_UFI                    0  // UNRELIABLE FRAME Indicator
#define B_ECRC                   9  // Enhanced full rate CRC bit
#define B_EMPTY_BLOCK           10  // for voice memo purpose, this bit is used to determine

#if REL99
#if FF_EMR
  #define MEAN_BEP_FORMAT        5  // mean_bep is received in F1.31 format from DSP and should be
                                    // reported in F6.26 format to L2.
  #define CV_BEP_FORMAT          5  // cv_bep is received in F3.13 format from DSP and should be
                                    // reported in F8.8 format to L2.
  #define B_SID1                 4  // SID1 bit.
  #define B_M1                   0  // M1 bit.
  #define B_CE                   8  // Connection element
  #define B_FCS_OK               3  // Frame check sequence bit
  #define WORD_SHIFT            16  // Shift word
#endif
#endif //L1_R99


#if (DEBUG_DEDIC_TCH_BLOCK_STAT == 1)
  #define FACCH_GOOD 10
  #define FACCH_BAD  11
#endif

#if (AMR == 1)
  // Place of the RX type in the AMR block header
  #define RX_TYPE_SHIFT           3
  #define RX_TYPE_MASK            0x0038

  // Place of the vocoder type in the AMR block header
  #define VOCODER_TYPE_SHIFT      0
  #define VOCODER_TYPE_MASK       0x0007

  // List of the possible RX types in a_dd block
  #define SPEECH_GOOD             0
  #define SPEECH_DEGRADED         1
  #define ONSET                   2
  #define SPEECH_BAD              3
  #define SID_FIRST               4
  #define SID_UPDATE              5
  #define SID_BAD                 6
  #define AMR_NO_DATA             7
  #define AMR_INHIBIT             8

  // List of possible RX types in RATSCCH block
  #define C_RATSCCH_GOOD          5

  #if REL99
  #if FF_EMR
    #define RATSCCH_GOOD            5
    #define RATSCCH_BAD             6
  #endif
  #endif //L1_R99



  // List of the possible AMR channel rate
  #define AMR_CHANNEL_4_75        0
  #define AMR_CHANNEL_5_15        1
  #define AMR_CHANNEL_5_9         2
  #define AMR_CHANNEL_6_7         3
  #define AMR_CHANNEL_7_4         4
  #define AMR_CHANNEL_7_95        5
  #define AMR_CHANNEL_10_2        6
  #define AMR_CHANNEL_12_2        7


  // Types of RATSCCH blocks
  #define C_RATSCCH_UNKNOWN                   0
  #define C_RATSCCH_CMI_PHASE_REQ             1
  #define C_RATSCCH_AMR_CONFIG_REQ_MAIN       2
  #define C_RATSCCH_AMR_CONFIG_REQ_ALT        3
  #define C_RATSCCH_AMR_CONFIG_REQ_ALT_IGNORE 4    // Alternative AMR_CONFIG_REQ with updates coming in the next THRES_REQ block
  #define C_RATSCCH_THRES_REQ                 5

  // These flags define a bitmap that indicates which AMR parameters are being modified by a RATSCCH
  #define C_AMR_CHANGE_CMIP  0
  #define C_AMR_CHANGE_ACS   1
  #define C_AMR_CHANGE_ICM   2
  #define C_AMR_CHANGE_THR1  3
  #define C_AMR_CHANGE_THR2  4
  #define C_AMR_CHANGE_THR3  5
  #define C_AMR_CHANGE_HYST1 6
  #define C_AMR_CHANGE_HYST2 7
  #define C_AMR_CHANGE_HYST3 8

  // CMIP default value
  #define C_AMR_CMIP_DEFAULT 1  // According to ETSI specification 05.09, cmip is always 1 by default (new channel, handover...)

#endif
// "d_ctrl_tch" bits positions for TCH configuration.
#define B_CHAN_MODE              0
#define B_CHAN_TYPE              4
#define B_RESET_SACCH            6
#define B_VOCODER_ON             7
#define B_SYNC_TCH_UL            8
#if (AMR == 1)
  #define B_SYNC_AMR               9
#else
#define B_SYNC_TCH_DL            9
#endif
#define B_STOP_TCH_UL           10
#define B_STOP_TCH_DL           11
#define B_TCH_LOOP              12
#define B_SUBCHANNEL            15

// "d_ctrl_abb" bits positions for conditionnal loading of abb registers.
#define B_RAMP                   0
#if ((ANALOG == 1) || (ANALOG == 2) || (ANALOG == 3))
  #define B_BULRAMPDEL             3 // Note: this name is changed
  #define B_BULRAMPDEL2            2 // Note: this name is changed
  #define B_BULRAMPDEL_BIS         9
  #define B_BULRAMPDEL2_BIS       10
#endif
#if ((RF_FAM == 61) && ((DSP == 38) || (DSP == 39)))
  #define B_BULRAMPDEL             3 // Note: this name is changed
  #define B_BULRAMPDEL2            2 // Note: this name is changed
  #define B_BULRAMPDEL_BIS         9
  #define B_BULRAMPDEL2_BIS       10
#endif
#define B_AFC                    4

// "d_ctrl_system" bits positions.
#define B_TSQ                    0
#define B_BCCH_FREQ_IND          3
#define B_TASK_ABORT            15  // Abort RF tasks for DSP.
#define B_SWH_APPLY_WHITENING    4  // SWH control(enable, disable)

#if (NEW_SNR_THRESHOLD == 1) && (L1_SAIC == 0)
#error "SNR threshold valid only for SAIC build"
#endif

//SAIC related
#define B_SWH              1   /* SWH bit position */
#define B_NEW_POND         2   /* NEW_POND bit position*/
#define B_SWH_DOUBLE_INTERPOLATION    3  /* Single or Double Interpolation*/
#define B_SWH_INTERPOLATE             4  /* interpolate or not*/
#define B_TOA_ALMNT                   5  /* New TOA alignment from DSP for non saic mode*/
#define B_SNR_ALMNT                   6  /* New SNR threshold set to 1024 for AFC and TOA*/

// DB Area
#define B_SAIC_DB                0
#define B_NEW_POND_DB            1
#define B_SWH_DB                 4
#define B_SWH_CHANTAP            12
#define SAIC_ENABLE_DB           ((0x01 << B_SAIC_DB) | (0x01 << B_NEW_POND_DB))

#if (NEW_SNR_THRESHOLD == 1)
#if (ONE_THIRD_INTRPOL ==1 )
#define SAIC_INITIAL_VALUE ((1<< B_SWH)|(1<< B_NEW_POND)| (1<< B_SWH_DOUBLE_INTERPOLATION)) | (1 << B_SWH_INTERPOLATE) |(1<< B_TOA_ALMNT) | (1 << B_SNR_ALMNT)
#else /* ONE_THIRD_INTRPOL == 0*/
#define SAIC_INITIAL_VALUE ((1<< B_SWH)|(1<< B_NEW_POND)| (1 << B_SWH_INTERPOLATE) |(1<< B_TOA_ALMNT) | (1 << B_SNR_ALMNT)
#endif /* ONE_THIRD_INTRPOL*/
#else /* NEW_SNR_THRESHOLD == 0 */
#if (ONE_THIRD_INTRPOL ==1 )
#define SAIC_INITIAL_VALUE ((1<< B_SWH)|(1<< B_NEW_POND)| (1<< B_SWH_DOUBLE_INTERPOLATION)) | (1 << B_SWH_INTERPOLATE) /* added for CQ-95275 &  93303 */
#else
#define SAIC_INITIAL_VALUE ((1<< B_SWH)|(1<< B_NEW_POND)) | (1 << B_SWH_INTERPOLATE)
#endif//ONE_THIRD_INTRPOL
#endif /*NEW_SNR_THRESHOLD*/
#if (FF_L1_FAST_DECODING == 1)
#define B_FAST_DECODING_FLAG (5)
#define C_FAST_DECODING_CRC_FIRE1 (0x02)

/* Fast decoding states */
#define C_FAST_DECODING_NONE       0
#define C_FAST_DECODING_AWAITED    1
#define C_FAST_DECODING_PROCESSING 2
#define C_FAST_DECODING_COMPLETE   3
#define C_FAST_DECODING_FORBIDDEN  4

#endif /* FF_L1_FAST_DECODING */

#if (FF_L1_FAST_DECODING == 1)
#define C_BA_PM_MEAS (4)
#else
#define C_BA_PM_MEAS (2)
#endif /* FF_L1_FAST_DECODING */

#if FF_L1_IT_DSP_USF
  // d_dsp_hint_flag word definition
  #define B_USF_HINT_ISSUED      0
  #define B_NON_USF_HINT_ISSUED 1
#endif
#if FF_L1_IT_DSP_DTX
  // d_fast_dtx_hint word definition- now d_fast_dtx_hint is not used- same as- d_dsp_hint_flag
  #define B_DTX_HINT_ISSUED      0
  #define B_DTX_STATE            1

  // d_tch_mode_ext word definition
  #define B_FAST_DTX_ENABLED     0
  #define B_NON_USF_HINT_ISSUED 1
#endif
// ****************************************************************
// POLESTAR EVABOARD 3 REGISTERS & ADRESSES  DEFINITIONS
// ****************************************************************


  //  DSP ADRESSES
  //--------------------

  #define DB_SIZE                 (4*20L)     // 4 pages of 20 words...

  #if (DSP >= 33)
    #define MCU_API_BASE_ADDRESS 0xFFD00000L
    #define DSP_API_BASE_ADDRESS 0x800
    #define DB_W_PAGE_0          0xFFD00000L   // DB page 0 write : 20 words long
    #define DB_W_PAGE_1          0xFFD00028L   // DB page 1 write : 20 words long
    #define DB_R_PAGE_0          0xFFD00050L   // DB page 0 read  : 20 words long
    #define DB_R_PAGE_1          0xFFD00078L   // DB page 1 read  : 20 words long
    #define NDB_ADR              0xFFD001A8L   // NDB start address : 268 words
    #define PARAM_ADR            0xFFD00862L   // PARAM start address  : 57 words

    #if (DSP_DEBUG_TRACE_ENABLE == 1)
      #define DB2_R_PAGE_0       0xFFD00184L
      #define DB2_R_PAGE_1       0xFFD00188L
    #endif

    #if (DSP >= 38)
      /* DSP CPU load measurement */
      #define DSP_CPU_LOAD_MCU_API_BASE_ADDRESS 0xFFD01DE0L
      #define DSP_CPU_LOAD_DB_W_PAGE_0          0xFFD01DE0L   // DB page 0 write : 4 words long
      #define DSP_CPU_LOAD_DB_W_PAGE_1          0xFFD01DE8L   // DB page 1 write : 4 words long
      #define DSP_CPU_LOAD_MCU_W_CTRL           0xFFD01DF0L   // DSP CPU load feature control
      #define DSP_CPU_LOAD_MCU_W_TDMA_FN        0xFFD01DF2L   // MCU TDMA frame number
    #endif

  #else
    #define MCU_API_BASE_ADDRESS 0xFFD00000L
    #define DSP_API_BASE_ADDRESS 0x800
    #define DB_W_PAGE_0          0xFFD00000L   // DB page 0 write : 20 words long
    #define DB_W_PAGE_1          0xFFD00028L   // DB page 1 write : 20 words long
    #define DB_R_PAGE_0          0xFFD00050L   // DB page 0 read  : 20 words long
    #define DB_R_PAGE_1          0xFFD00078L   // DB page 1 read  : 20 words long
    #define NDB_ADR              0xFFD000a0L   // NDB start address : 268 words
    #define PARAM_ADR            0xFFD002b8L   // PARAM start address  : 57 words
  #endif

  #if (DSP == 38) || (DSP == 39)
    // a DB common is used by the GSM and GPRS for the common feature
    #define DB_COMMON_W_PAGE_0          0xFFD00760L   // DB common page 0
    #define DB_COMMON_W_PAGE_1          0xFFD00780L   // DB common page 1
  #endif

// ****************************************************************
// ADC reading definitions
// ****************************************************************

#define ADC_READ_PERIOD (40)   //30 * 4.615 = 140ms


// ****************************************************************
// AGC: IL table identifier used by function Cust_get_agc_from_IL
// ****************************************************************
#define MAX_ID     1
#define AV_ID      2
#define PWR_ID     3

#if TESTMODE
  // ****************************************************************
  // Testmode: State of the continous mode
  // ****************************************************************
  #define TM_NO_CONTINUOUS        1   // continuous mode isn't active
  #define TM_START_RX_CONTINUOUS  2   // start the Rx continuous mode
  #define TM_START_TX_CONTINUOUS  3   // start the Tx continuous mode
  #define TM_CONTINUOUS           4   // Rx or Tx continuous mode
#endif
#if (AMR == 1)
  // ****************************************************************
  // AMR: Position of each AMR parameters in the AMR API buffer
  // ****************************************************************
  #define NSCB_INDEX    0
  #define NSCB_SHIFT    6
  #define ICMUL_INDEX   0
  #define ICMUL_SHIFT   4
  #define ICMDL_INDEX   0
  #define ICMDL_SHIFT   1
  #define ICMIUL_INDEX  0
  #define ICMIUL_SHIFT  3
  #define ICMIDL_INDEX  0
  #define ICMIDL_SHIFT  0
  #define ACSUL_INDEX   1
  #define ACSUL_SHIFT   0
  #define ACSDL_INDEX   1
  #define ACSDL_SHIFT   8
  #define THR1_INDEX    2
  #define THR1_SHIFT    0
  #define THR2_INDEX    2
  #define THR2_SHIFT    6
  #define THR3_INDEX    3
  #define THR3_SHIFT    8
  #define HYST1_INDEX   3
  #define HYST1_SHIFT   0
  #define HYST2_INDEX   3
  #define HYST2_SHIFT   4
  #define HYST3_INDEX   2
  #define HYST3_SHIFT   12
  #define NSYNC_INDEX   3
  #define NSYNC_SHIFT   14
  #define CMIP_INDEX    3
  #define CMIP_SHIFT    15

  #define NSCB_MASK     0x0001
  #define ICM_MASK      0x0003
  #define ICMI_MASK     0x0001
  #define ACS_MASK      0x00FF
  #define THR_MASK      0x003F
  #define HYST_MASK     0x000F
  #define CMIP_MASK     0x0001

#endif

#if (L1_RF_KBD_FIX == 1)

#define FRAME_DURATION 5000
#define CUST_DEBOUNCE_TIME 64

#endif

#endif // L1_CONST_H