FreeCalypso > hg > freecalypso-sw
view gsm-fw/g23m-glue/cst/cus_cst.h @ 923:10b4bed10192
gsm-fw/L1: fix for the DSP patch corruption bug
The L1 code we got from the LoCosto fw contains a feature for DSP CPU load
measurement. This feature is a LoCosto-ism, i.e., not applicable to earlier
DBB chips (Calypso) with their respective earlier DSP ROMs. Most of the
code dealing with that feature is conditionalized as #if (DSP >= 38),
but one spot was missed, and the MCU code was writing into an API word
dealing with this feature. In TCS211 this DSP API word happens to be
used by the DSP code patch, hence that write was corrupting the patched
DSP code.
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Mon, 19 Oct 2015 17:13:56 +0000 |
parents | c14bc60c6c30 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT : XXX SOURCE : CUS_CST.H | | AUTHOR : XXX VERSION: 1.0 | | CREATED : 01.02.99 STATE : code | +--------------------------------------------------------------------+ MODULE : CUS_CST PURPOSE : Custom dependent definitions for the CST entity of the mobile station. Use this header for definitions to integrate the protocol stack entity CST in your target system. */ #ifndef CUS_CST_H #define CUS_CST_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values for the CST * timer TXXX depending on the various channel types * and service access point identifiers. * * If your target system uses other units please * change the values. */ /* * Unit is 1 ms */ #define T_RX_VALUE 1000 #define TICS_PER_DECIHOURS (1000*60*6) /* * MAX_CST_TIMER * * Description : The constant define the number of timer available * in the timer pool. */ #define MAX_CST_TIMER 4 /* * VERSION * * Description : The constants define the type and the value of a * version identification. The version is part of the * monitor struct. */ #define T_VERSION char #define VERSION_CST "CST 1.0" /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #ifdef OPTION_MULTITHREAD #define VSI_CALLER cst_handle, #define VSI_CALLER_SINGLE cst_handle #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif // CUS_CST_H