FreeCalypso > hg > freecalypso-sw
view README @ 142:15d5977390c2
fw build for pirelli: set the ASIC_CONF register like the original fw does
author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
---|---|
date | Tue, 12 Nov 2013 05:00:00 +0000 |
parents | a2e793f6b8c4 |
children | afceeeb2cba1 |
line wrap: on
line source
You are looking at the top level of the freecalypso-sw source code tree. The subtrees of this source tree are as follows: loadtools The suite of tools which run on a development host machine (normally PC/Linux desktop or laptop) and communicate with Calypso targets. Starting from the Calypso ROM bootloader, these tools allow you to peek and poke registers, read and program flash, and load and execute experimental code in IRAM or XRAM. nuc-fw Nucleus-based firmware. This tree contains the early beginnings of my (Michael Spacefalcon's) attempt to recreate TI's GSM firmware suite running under Nucleus RTOS. The current code is in the earliest embryonic stages of development, and does not do anything useful yet. The RTOS code is FreeNucleus, based on the Nucleus PLUS sources liberated by comrade XVilka and ported to build with gcc and run on the Calypso by Spacefalcon the Outlaw. target-utils These are utilities which run on Calypso targets, but which are independent of Nucleus, of any other RTOS, and of any larger firmware suite, i.e., totally standalone. The two current utilities are loadagent, which is common for all currently supported Calypso targets and is required in order to use fc-loadtool or fc-xram (see loadtools), and pirexplore - the latter is a hardware exploration utility specific to the Pirelli DP-L10 target. toolchain Scripts and patches for building the gcc+binutils toolchain targeting ARM7, the CPU core of the Calypso GSM/GPRS baseband processor. You'll need to build and install this toolchain first before you can build nuc-fw or target-utils.