FreeCalypso > hg > freecalypso-sw
view .hgignore @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 27 Jun 2015 07:31:30 +0000 |
parents | 5e46679bdb6a |
children | 312778104f54 |
line wrap: on
line source
syntax: regexp \.[oa]$ \.elf$ \.bin$ \.srec$ ^ffstools/tiffs-rd/tiffs$ ^ffstools/tiffs-wrappers/mokoffs$ ^ffstools/tiffs-wrappers/pirffs$ ^gsm-fw/L1/cfile/l1_.*_intram ^gsm-fw/build\.conf$ ^gsm-fw/config\.stamp$ ^gsm-fw/finlink/.*\.ld$ ^gsm-fw/finlink/.*\.map$ ^gsm-fw/include/config\. ^gsm-fw/services/ffs/ffs_target ^loadtools/fc-iram$ ^loadtools/fc-loadtool$ ^loadtools/fc-xram$ ^miscutil/fc-serterm$ ^miscutil/imei-luhn$ ^rvinterf/asyncshell/fc-shell$ ^rvinterf/ctracedec/ctracedec$ ^rvinterf/etmsync/fc-fsio$ ^rvinterf/g23sh/g23sh$ ^rvinterf/lowlevel/rvinterf$ ^rvinterf/lowlevel/rvtdump$ ^rvinterf/lowlevel/tfc139$ ^rvinterf/misc/fc-sendsp$ ^rvinterf/old/etmsend$ ^rvinterf/old/rvtdump$ ^rvinterf/tmsh/fc-tmsh$ ^target-utils/.*/crt0\.S$ ^target-utils/tf-breakin/embed\.c$ ^target-utils/tf-breakin/mkembed$ ^toolchain/binutils-2\.21\.1/ ^toolchain/binutils-build/ ^toolchain/gcc-4\.5\.4/ ^toolchain/gcc-build/ ^toolchain/newlib-2\.0\.0/ ^toolchain/newlib-build/