view gsm-fw/L1/cfile/Makefile @ 884:353daaa6014d

gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.
author Space Falcon <falcon@ivan.Harhan.ORG>
date Sat, 27 Jun 2015 07:31:30 +0000
parents 5f93a9a8f9a0
children 3f178b3ac50a
line wrap: on
line source

CC=	arm-elf-gcc
CPPFLAGS=-I../../include -I../include -I../audio_include -I../audio_cust0 \
	-I../tm_include -I../tm_cust0 -I../cust0 -I../tpudrv \
	-DMOVE_IN_INTERNAL_RAM
CFLAGS=	-O2 -fno-builtin -mthumb-interwork
ASFLAGS=-mthumb-interwork
LD=	arm-elf-ld
INTSED=	../intram.sed

IOBJS=	l1_api_hisr.o l1_cmplx_intram.o l1_ctl.o l1_drive.o l1_func.o \
	l1_mfmgr.o l1_small_asm.o l1_sync_intram.o l1_isr_glue.o
XOBJS=	l1_afunc.o l1_async.o l1_cmplx.o l1_init.o l1_pwmgr.o l1_small_defs.o \
	l1_sync.o l1_trace.o dummy_tch_data.o

all:	iramcode.o xipcode.o

${XOBJS}:	%.o : %.c
	${CC} ${CFLAGS} ${CPPFLAGS} -mthumb -c $<

l1_cmplx_intram.c:	l1_cmplx.c ${INTSED}
	sed -n -f ${INTSED} l1_cmplx.c > $@

l1_sync_intram.c:	l1_sync.c ${INTSED}
	sed -n -f ${INTSED} l1_sync.c > $@

iramcode.o:	${IOBJS}
	${LD} -r -o $@ ${IOBJS}

xipcode.o:	${XOBJS}
	${LD} -r -o $@ ${XOBJS}

clean:
	rm -f *.[oa] l1_*_intram.c *.out *errs