gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 *
 *        Filename ind_os.h
 *        Version  1.2
 *        Date     05/25/00
 * 
 ************* Revision Controle System Header *************/



#define OS_OK   0
        
typedef SYS_WORD16  T_OS_RETURN;

// Prototype for independant os commands
extern T_OS_RETURN  ind_os_sleep (SYS_UWORD32 millisecs);