view gsm-fw/ccd/critical_ext.c @ 884:353daaa6014d

gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.
author Space Falcon <falcon@ivan.Harhan.ORG>
date Sat, 27 Jun 2015 07:31:30 +0000
parents 970d6199f2c5
children
line wrap: on
line source


/*
+------------------------------------------------------------------------------
|  File:       critical_ext.c
+------------------------------------------------------------------------------
|                 Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG.
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+------------------------------------------------------------------------------
| Purpose:    Encoding and decoding functions for criticalExtensions  
|
| $Identity:$
+------------------------------------------------------------------------------
*/

/*
 * Standard definitions like UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes and constants in the common part of ccd
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

#ifndef RUN_INT_RAM
/*
+------------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : critical_ext            |
| STATE   : code                       ROUTINE : cdc_critical_ext_decode |
+------------------------------------------------------------------------+

  PURPOSE : Decode elements of type criticalExtensions

            An element of this type should never be encoded or decoded.
            If the coder faces an IE of this type, it should report an
            error report and abort.
            Whenever a criticalExtensions-IE is extended from NULL or 
            SEQUENCE {} to another type, its CCD coding type will change
            and the functions in this file will not be called for that IE
            any more.

            According to 3GPP TS25.331 V3.6.0, 10.1.1.2.2:
            Since messages including critical extensions are rejected by 
            receivers not comprehending them, these messages can be 
            modified completely, e.g. IEs may be inserted at any place 
            and IEs may be removed or redefined.
            See also 3GPP TS25.921 V4.3.0, 10.4.
*/
SHORT cdc_critical_ext_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
	#ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_critical_ext_decode()");
	#else
	TRACE_CCD (globs, "cdc_critical_ext_decode() %s", mcomp[melem[e_ref].elemRef].name);
	#endif
#endif

  globs->pstructOffs = melem[e_ref].structOffs;

  /* For optional elements we have already set the valid flag in the 
   * C-structure. We have done it while processing ASN1_SEQ.
   */
  if ( ! cdc_isPresent(e_ref, globs) ) {
    return 1;
  }

  if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0)
  {
    ccd_recordFault (globs, 
                    ERR_CRITICAL_EXT, 
                    BREAK, 
                    (USHORT) e_ref, 
                    globs->pstruct + melem[e_ref].structOffs
                  ); 
    return 0;
  }
  /* 
   * Currently CCD tool chain does not support extensions of this type.
   * This else-implementation is just an outlook.
   * 
  else
  {
    U16 compRef = melem[e_ref].elemRef;
    U16 elemRef = mcomp[compRef].componentRef;
    (void) codec[melem[Elem].codingType][DECODE_FUN]
                                            (compRef, elemRef, globs);
  }*/
  return 1;
}
#endif /* !RUN_INT_RAM */

#ifndef RUN_INT_RAM
/*
+------------------------------------------------------------------------+
| PROJECT : CCD (6144)                 MODULE  : critical_ext            |
| STATE   : code                       ROUTINE : cdc_critical_ext_encode |
+------------------------------------------------------------------------+

  PURPOSE : Encode elements of type criticalExtensions

            An element of this type should never be encoded or decoded.
            If the coder faces an IE of this type, it should report an
            error report and abort.             
*/
SHORT cdc_critical_ext_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{

#ifdef DEBUG_CCD
	#ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_critical_ext_encode()");
	#else
	TRACE_CCD (globs, "cdc_critical_ext_encode() %s", mcomp[melem[e_ref].elemRef].name);
	#endif
#endif

  globs->pstructOffs = melem[e_ref].structOffs;

  /* For optional elements we have already set the valid flag in the 
   * C-structure. We have done it while processing ASN1_SEQ.
   */
  if ( ! cdc_isPresent(e_ref, globs) ) {
    return 1;
  }

  if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0)
  {
    ccd_recordFault (globs, 
                    ERR_CRITICAL_EXT, 
                    BREAK, 
                    (USHORT) e_ref, 
                    globs->pstruct + melem[e_ref].structOffs
                  ); 
    return 0;
  }
  /* 
   * Currently CCD tool chain does not support extensions of this type.
   * This else-implementation is just an outlook.
   * 
  else
  {
    U16 compRef = melem[e_ref].elemRef;
    U16 elemRef = mcomp[compRef].componentRef;
    (void) codec[melem[Elem].codingType][ENCODE_FUN]
                                            (compRef, elemRef, globs);
  }*/
  return 1;
}
#endif /* !RUN_INT_RAM */