FreeCalypso > hg > freecalypso-sw
view gsm-fw/cdg/cdginc-conservative/uicc.intf @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 27 Jun 2015 07:31:30 +0000 |
parents | 9ba088a875bd |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : uicc.intf | | SOURCE : "sap\8010_136_SIMDRV_SAP.pdf" | | LastModified : "2004-06-10" | | IdAndVersion : "8010.136.03.009" | | SrcFileTime : "Thu Nov 29 09:27:56 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ Interface = { structHdrFile = "uicc.h"; inputs = { SIMDRV_DUMMY = { primNum = 0x80FF009A; primStruct = Uicc_Dummy; comment = ""; }; }; outputs = { }; };