gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

LD=	arm-elf-ld

SUBDIR=	alr cc dl l1 mm rr sim sms ss

XIP_OBJS=	alr/xipcode.o cc/xipcode.o dl/xipcode.o l1/l1_pei.o \
		mm/xipcode.o rr/xipcode.o sim/xipcode.o sms/xipcode.o \
		ss/xipcode.o

all:	xipcode.o

${SUBDIR}: FRC
	cd $@; ${MAKE} ${MFLAGS}

alr/xipcode.o:	alr
	@true

cc/xipcode.o:	cc
	@true

dl/xipcode.o:	dl
	@true

l1/l1_pei.o:	l1
	@true

mm/xipcode.o:	mm
	@true

rr/xipcode.o:	rr
	@true

sim/xipcode.o:	sim
	@true

sms/xipcode.o:	sms
	@true

ss/xipcode.o:	ss
	@true

xipcode.o:	${XIP_OBJS}
	${LD} -r -o $@ ${XIP_OBJS}

clean: FRC
	rm -f *.[oa] *.out *errs
	for i in ${SUBDIR}; do (cd $$i; ${MAKE} ${MFLAGS} clean); done

FRC: