gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

CC=	arm-elf-gcc
CFLAGS=	-O2 -fno-builtin -mthumb-interwork -mthumb
CPPFLAGS=-I../../inc -DRUN_FLASH
VPATH=	..

OBJS=	frame.o frame_version.o frm_ext.o prf_func.o route.o \
	vsi_com.o vsi_drv.o vsi_mem.o vsi_mis.o vsi_ppm.o \
	vsi_pro.o vsi_sem.o vsi_tim.o vsi_trc.o

all:	${OBJS}

clean:
	rm -f *.[oa] *errs