gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

/*
 * w16 hexaddr xxxx -- write a 16-bit register or memory location
 */

#include <sys/types.h>
#include "types.h"

void
lldbg_cmd_w16(argbulk)
	char *argbulk;
{
	char *argv[3];
	u_long addr, data;

	if (lldbg_parse_args(argbulk, 2, 2, argv, 0) < 0)
		return;
	if (lldbg_parse_hexarg(argv[0], 8, &addr) < 0) {
	      lldbg_printf("ERROR: arg1 must be a valid 32-bit hex address\n");
		return;
	}
	if (addr & 1) {
		lldbg_printf("ERROR: unaligned address\n");
		return;
	}
	if (lldbg_parse_hexarg(argv[1], 4, &data) < 0) {
		lldbg_printf("ERROR: arg2 must be a valid 16-bit hex value\n");
		return;
	}
	*(volatile u16 *)addr = data;
}