gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

#include "cmdtab.h"

extern void lldbg_cmd_dump();
extern void lldbg_cmd_entry();
extern void lldbg_cmd_r8();
extern void lldbg_cmd_r16();
extern void lldbg_cmd_r32();
extern void lldbg_cmd_w8();
extern void lldbg_cmd_w16();
extern void lldbg_cmd_w32();

const struct cmdtab lldbg_cmdtab[] = {
	{"dump", lldbg_cmd_dump},
	{"entry", lldbg_cmd_entry},
	{"r8", lldbg_cmd_r8},
	{"r16", lldbg_cmd_r16},
	{"r32", lldbg_cmd_r32},
	{"w8", lldbg_cmd_w8},
	{"w16", lldbg_cmd_w16},
	{"w32", lldbg_cmd_w32},
	{0, 0}
};