gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

	.section "ext.ram","aw",%nobits
	.balign  4
	.globl	lldbg_stack
lldbg_stack:
	.space	2048
lldbg_init_sp:

	.text
	.code	32
	.globl	lldbg_entry
lldbg_entry:
	stmfd	sp!, {r0-r12,lr}
	mrs	r0, CPSR
	mov	r1, sp
	/* supervisor mode, disable all interrupts */
	msr	CPSR_c, #0xd3
	ldr	sp, =lldbg_init_sp
	/* save entry SP and CPSR */
	ldr	r2, =lldbg_entry_cpsr
	str	r0, [r2]
	ldr	r2, =lldbg_entry_sp
	str	r1, [r2]
	b	lldbg_main