FreeCalypso > hg > freecalypso-sw

view gsm-fw/services/dar/dar_error_hdlr.c @ 884:353daaa6014d

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.
author Space Falcon <falcon@ivan.Harhan.ORG>
date Sat, 27 Jun 2015 07:31:30 +0000
parents a7087f91c752
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  dar_error_hdlr.c                                            */
/*                                                                          */
/*  Purpose:  This file contains routines used to report unrecoverable      */
/*                 memory errors that might occur.                          */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date               Modification                                         */
/*  ------------------------------------------------------------------------*/
/*  27 September 2001  Create                                               */
/*                                                                          */
/*  Author:  Stephanie Gerthoux                                             */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "../../riviera/rv/rv_defined_swe.h"
#ifdef RVM_DAR_SWE

   #include "../../riviera/rv/rv_general.h"
   #include "../../riviera/rvf/rvf_api.h"
   #include "dar_error_hdlr_i.h"
   #include "dar_macro_i.h"

   /***************************************************************************/
   /*                                                                         */
   /*    Function Name:   dar_error_trace                                     */
   /*                                                                         */
   /*    Purpose:         This function is used to report error occured during*/
   /*                     the diagnose entity execution                       */
   /*                                                                         */
   /*    Input Parameters:                                                    */
   /*        status       - Contains the error code to be reported.           */
   /*                                                                         */
   /*    Output Parameters:                                                   */
   /*        None.                                                            */
   /*                                                                         */
   /*    Global Parameters:                                                   */
   /*        None.                                                            */
   /*                                                                         */
   /*    Note:                                                                */
   /*        None.                                                            */
   /*                                                                         */
   /*    Revision History:                                                    */
   /*       27 September 01           Create                                  */
   /*                                                                         */
   /***************************************************************************/
   void dar_error_trace(UINT8 error_id)
   {
      switch(error_id)
      {
         case DAR_ENTITY_NOT_START:
         {
            DAR_SEND_TRACE("DAR entity not started.",RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ENTITY_NO_MEMORY:
         {
            DAR_SEND_TRACE("DAR entity has not enough memory",
				RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ENTITY_BAD_PARAMETER:
         {
            DAR_SEND_TRACE("DAR entity has bad parameters",
				RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ERROR_STOP_EVENT:
         {
            DAR_SEND_TRACE("DAR entity has received a stop error event",
				RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ERROR_START_EVENT:
         {
             DAR_SEND_TRACE("DAR entity has received a start error event",
				RV_TRACE_LEVEL_ERROR);
             break;
         }

         case DAR_ENTITY_BAD_MESSAGE:
         {
            DAR_SEND_TRACE("DAR entity has received a bad message",
				RV_TRACE_LEVEL_ERROR);
            break;
         }  
      }
   }
   /*********************** End of dar_error_trace function *******************/

   /***************************************************************************/
   /*                                                                         */
   /*    Function Name:   dar_ffs_error_trace                                 */
   /*                                                                         */
   /*    Purpose:         This function is used to report error occured during*/
   /*                     the dar entity execution                            */
   /*                                                                         */
   /*    Input Parameters:                                                    */
   /*        status       - Contains the error code to be reported.           */
   /*                                                                         */
   /*    Output Parameters:                                                   */
   /*        None.                                                            */
   /*                                                                         */
   /*    Global Parameters:                                                   */
   /*        None.                                                            */
   /*                                                                         */
   /*    Note:                                                                */
   /*        None.                                                            */
   /*                                                                         */
   /*    Revision History:                                                    */
   /*       29 october 01           Create                                    */
   /*                                                                         */
   /***************************************************************************/
   void dar_ffs_error_trace(UINT8 error_id)
   {
      switch(error_id)
      {
         case DAR_ENTITY_NO_MEMORY:
         {
            DAR_SEND_TRACE("DAR FFS entity has not enough memory",
				RV_TRACE_LEVEL_ERROR);
            break;
         }
         case DAR_ENTITY_FILE_ERROR:
         {
            DAR_SEND_TRACE("DAR FFS entity has received a wrong file name or the flash is not formatted",RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ENTITY_FILE_NO_SAVED:
         {
            DAR_SEND_TRACE("DAR FFS entity has not saved the file",
				RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ENTITY_FILE_NO_CLOSE:
         {
            DAR_SEND_TRACE("DAR FFS entity has not closed the file",
				RV_TRACE_LEVEL_ERROR);
            break;
         }
      } /* switch(error_id) */
   } /* dar_ffs_error_trace */
   /******************** End of dar_ffs_error_trace function *****************/

#endif /* #ifdef RVM_DAR_SWE */