view loadtools/CHANGES @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
author
Space Falcon <falcon@ivan.Harhan.ORG>
date
Sat, 27 Jun 2015 07:31:30 +0000 (2015-06-27)
parents
3275c8881cb7
children
f46a914c455e
line source
+ − Changes from loadtools-r1 to loadtools-r2:
+ −
+ − * A flash ID check has been implemented in fc-loadtool, invoked automatically
+ − before doing any erase or program operations, or explicitly at any time with
+ − the flash info command. This check ensures that the type of flash chip in
+ − the target GSM device is the same as what loadtool thinks it is, based on the
+ − hardware parameters file.
+ −
+ − * fc-xram command line syntax changed slightly in order to support immediate
+ − passing of the serial line to rvinterf/rvtdump.
+ −
+ − * Miscellaneous minor polish.