gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

/*
 * The exit-mode and flash settings in the hardware parameter files
 * specified with -h or -H are meaningful only for fc-loadtool, but
 * the same hwparam.c code is included in fc-iram and fc-xram as well.
 * This module provides the stubs, allowing fc-iram and fc-xram to link.
 */

void
set_default_exit_mode()
{
}

void
set_flash_device()
{
}

void
set_boot_reflash_hack()
{
}