FreeCalypso > hg > freecalypso-sw
view loadtools/labaud.c @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 27 Jun 2015 07:31:30 +0000 |
parents | 604648026e9c |
children |
line wrap: on
line source
/* * This module handles the switching of serial baud rates * in coordination with loadagent. */ #include <stdio.h> #include <stdlib.h> #include <termios.h> #include <unistd.h> #include "baudrate.h" extern int target_fd; extern struct baudrate *current_baud_rate; extern struct baudrate *find_baudrate_by_name(); loadagent_switch_baud(newbr) struct baudrate *newbr; { char *argv[3]; static char U = 'U'; printf("Switching loadagent communication to %s baud\n", newbr->name); argv[0] = "baud"; argv[1] = newbr->name; argv[2] = 0; tpinterf_make_cmd(argv); if (tpinterf_send_cmd() < 0) return(-1); switch_baud_rate(newbr); usleep(150000); write(target_fd, &U, 1); return tpinterf_pass_output(1); } cmd_baud(argc, argv) char **argv; { struct baudrate *br; if (argc < 2) { printf("Current baud rate is %s\n", current_baud_rate->name); return(0); } br = find_baudrate_by_name(argv[1]); if (!br) return(-1); /* error msg already printed */ return loadagent_switch_baud(br); }