gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

# Set WS=3 for both nCS0 and nCS1, same as the more basic Compal phones

w16 fffffb00 00A3
w16 fffffb02 00A3

# We need to switch the CS4/ADD22 pin from its default function of CS4
# to the needed ADD22, to access the 8 MiB of flash.  Compal's C155/156
# in-flash boot code does this setting, but let's do it ourselves too.

w16 fffef006 0008

# We don't mess with the FFFF:FB10 register on C155/156, i.e., we
# leave the "enable boot ROM" setting established by compalstage.
# Unlike C139, C155 and C156 phones do have working flash mapping
# at 0x03000000, so we use that.