FreeCalypso > hg > freecalypso-sw
view rvinterf/asyncshell/at.c @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 27 Jun 2015 07:31:30 +0000 |
parents | 4661b84260a0 |
children |
line wrap: on
line source
/* * Functions for the AT-over-RVTMUX interface */ #include <sys/types.h> #include <stdio.h> #include <ctype.h> #include <string.h> #include <strings.h> #include <stdlib.h> #include "pktmux.h" #include "limits.h" send_string_to_ati(str) char *str; { unsigned len; u_char sendpkt[MAX_PKT_TO_TARGET+1]; len = strlen(str); if (len + 1 > MAX_PKT_TO_TARGET) { printf("error: max pkt to target limit exceeded\n"); return(1); } /* fill out the packet */ sendpkt[0] = RVT_AT_HEADER; strcpy(sendpkt + 1, str); /* send it! */ send_pkt_to_target(sendpkt, len + 1); return(0); } void cmd_sendat(arg) char *arg; { while (isspace(*arg)) arg++; if (!*arg) { printf("error: missing string argument\n"); return; } ati_rx_control(1); send_string_to_ati(arg); }