gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

/*
 * This module contains the initialization code for fc-shell.
 */

#include <sys/types.h>
#include <stdio.h>
#include <string.h>
#include <strings.h>
#include <stdlib.h>
#include "pktmux.h"
#include "localsock.h"

init()
{
	static u_char want_rvt_lost[9] = {CLI2RVI_WANT_RVTRACE,
					  0xFF, 0xFF, 0xFF, 0xFF,
					  0x00, 0x00, 0x00, 0x00};

	localsock_prep_for_length_rx();
	send_init_command(want_rvt_lost, 9);
}