gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

/*
 * Definitions for the RVT MUX over-the-wire protocol
 */

#define	STX	0x02
#define	DLE	0x10

#define RVT_RV_HEADER        0x11
#define RVT_L1_HEADER        0x12
#define RVT_L23_HEADER       0x13
#define RVT_TM_HEADER        0x14
#define RVT_RNET_HEADER      0x15
#define RVT_PROF_HEADER      0x16
#define RVT_GTTBACK_HEADER   0x17
#define RVT_OTHER_HEADER     0x18
#define RVT_AT_HEADER        0x1A	/* FreeCalypso addition */
#define RVT_EXTUI_HEADER     0x1B	/* ditto */
#define RVT_INVALID_HEADER   0xFF