gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

The library built in this directory is a host side library, not for the target.
This library implements some functions for handling packet exchanges with GPF,
and it will be linked by some of the programs in the rvinterf suite.

It needs to be noted that the RVTMUX channel belonging to GPF was named
RVT_L23_HEADER by TI, and as a result, I thought that these packets related
specifically to the higher layers of the protocol stack.  But now we know that
hierarchically speaking, GPF sits *below* L1, not above, and GPF packets should
not be automatically associated with G23.  This realization was made fairly
late, thus "g23" appears in a bunch of function names, and in the name of this
library.